onceownedby Finding your suitable readers for two tap kegerator kit is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best readers for two tap kegerator kit including detail information and customer reviews. Let’s find out which is your favorite one.
503 reviews analysed
3 Tap Chrome Wall Mount Home Brew Beer Kegerator Kit (Low Flat Rate Shipping)
This kit contains everything you would need to dispense three types of beer at once. Just make sure that the fridge you want to use is large enough to hold three kegs. The kegs must sit perfectly flat. Used to dispense home brewed beers. Does NOT include air tank. Easily convert this to hold your home brew kegs too. Features: * The triple tap chrome kit is a sleek and simple way to pour from 3 kegs * With our freezer thermostat any chest freezer can be converted to a kegerator to dispense your beer at ice cold temeperatures! Includes: * (3) Chrome faucet shanks * (3) Chrome beer Faucets * All the necessary hex nuts, washers, and tail pieces * Double gauge regulator * Triple product gas manifold * (3) plastic faucet knobs * Air lines and beer lines with connectors * (3) ball lock gas disconnects * (3) ball lock liquid disconnects * Does NOT INCLUDE air tank
EdgeStar KC2000SSTWIN Full Size Stainless Steel Dual Tap Kegerator & Draft Beer Dispenser – Stainless Steel
- Stores up to a full sized half shell Sankey standard keg or two sixth kegs
- does NOT support use of Coors, Miller rubberized or other oversized kegs
- Temperatures: Low 30s to mid 40s degrees
- rolling casters included for easy mobility
- Protective floor plate
- For freestanding use only
- 5 lb. CO2 cylinder (supplied empty) included with external or internal mounting capabilities
- External Dimensions: 48 1/2 x 20 1/10 x 24 13/16 (height includes the draft tower)
- Warranty 90 days labor 1 year parts
- For a black version please see model KC2000TWIN, for a single tap KC2000SSA, single tap in black KC2000
BACOENG Double Faucet Door Mount Kegerator Refrigerator Conversion Kit No Tank
- 1. DUAL GAUGE REGULATOR: It comes with an appropriate pressure dial that features the style of a knob for regulating pressure. With a weight of 3 pounds, the unit comes with rubber covers for protective purposes. You can use the gauge to know the pressure outside and inside the CO2 tank –you will not have to be worried that your gas might run out. It also has a shutoff valve that features a built-in spring for preventing the backflow of beer. Pressure Relief Valve Releases at 45PSI.
- 2. LEVER HANDLE KEG COUPLER: This refers to a D System Keg Coupler that has a strong construction made of nickel-plated forged brass. The probe, on the other hand, is made of stainless steel. The unit can be used alongside any domestic brand American D system Sankey kegs. It features an easy-to-use design, where you only need to pull the lever handle out and down, in that order, to couple the keg. The coupling of the keg is quite convenient with the availability of a 55-psi pressure relief valve
- 3. CHROME BEER FAUCET WITH BRASS LEVER: Featuring a forged brass body and highly polished chrome finish, this beer faucet puts a stylish finishing touch on your kegerator at a price you’ll love.The brass shaft assembly and lever includes a non-stick ball washer for smooth operation, and the lever has standard threading that is compatible with most branded tap handles. This 4-1/8″ long beer shank with nipple assembly is constructed from chrome-plated brass and can be mounted through a 1″ hole.
- 4. METAL BEER FAUCET WRENCH: You need the ideal wrench spanner for loosening or tightening shrank collars easily and quickly without the worry that you will scratch your faucets, and the standard metal beer faucet wrench is just the right tool. The all-mental sturdiness of this wrench makes it quite durable as well as ideal to handle any tightening or loosening needs. It is 5-1/4″ in length, which makes it easy to use on any surface.
- 5. STANDARD METAL BEER FAUCET WRENCH: You need the ideal wrench spanner for loosening or tightening shrank collars easily and quickly without the worry that you will scratch your faucets, and the standard metal beer faucet wrench is just the right tool. The all-mental sturdiness of this wrench makes it quite durable as well as ideal to handle any tightening or loosening needs. It is 5-1/4″ in length, which makes it easy to use on any surface.
Kegco Full-Size Digital Homebrew Kegerator Dual Faucet Ball Lock Keg Dispenser Stainless
- DIGITAL TEMPERATURE CONTROL: With a digital LED display and intuitive controls, it is easy to set and verify the internal temperature of this home brew keg refrigerator. No more guessing what temperature the number on a manual dial will produce – simply press the up or down button, and the temperature is adjusted by one degree. You can view the temperature in Fahrenheit or Celsius on the clear digital display.
- WIDE ENOUGH TEMPERATURE RANGE TO DISPENSE OR FERMENT: Fan-forced cooling provides even cooling throughout the kegerator, and gives it one of the coldest temperature ranges of any keg cooler on the market today. The temperature can be set as low as 32 degrees to dispense ice cold home-brewed beer, or as high as 75 degrees to act as a fermentation chamber for your fermenting brew.
- LARGE INTERIOR: Store up to three Cornelius ball lock kegs in the HBK309S-2’s spacious interior, or use it to hold a 6 gallon bucket or carboy of fermenting homebrew. This keg refrigerator can even be used to store food and other beverages! It measures 33.25″ H x 23.6″ W x 23.6″ D.
- DEEP CHILL FUNCTION: At the push of a button, you can activate a Deep Chill function that forces the compressor to work continuously for up to 24 hours, quickly cooling down a warm beer keg. Once the keg has reached the desired temperature, you can push the Deep Chill button again to return the unit to it’s normal operation.
- CONVERTS TO A REFRIGERATOR WITH 2 SHELVES: We could all use a little more refrigerated storage! When you’re not using this kegerator to dispense home-brew beer, you can easily convert it into an all-refrigerator using the two included shelves. These shelves are adjustable, and can be placed far enough apart to accommodate 2-liter bottles or gallon jugs. Thanks to the HBK309S-2’s wide available temperature range, you can even use this unit to store bottles of wine!
The same great Kegco kegerators that you know and love – now specially designed for homebrewers! This HBK309S-2 Double Faucet Home-Brew Kegerator features the same attractive styling, digital functionality, and convenient drip tray, guard rail, and casters as our K309 draft beer dispensers, as well as a complete two-tap homebrew dispense system that allows you to tap two Cornelius ball lock kegs at a time. The home-brew dispense system includes a two-faucet stainless steel draft tower, premium two-product double gauge regulator, and glossy red 5 lb. aluminum CO2 cylinder.
Bev Rite CRCK101 Premium Refrigerator Conversion Kit Door Mount Keg Tap Beer Single Line, without CO2 Tank Clear
- Includes parts for one line complete setup
- Includes faucet, shank, faucet handle, wrench and D system keg coupler (Sankey)
- Includes premium double gauge tap rite beer regulator
- Includes NSF listed beer and air hose and clamps
- Includes US made 6×5 wall mount stainless steel drip tray
Premium refrigerator conversion kit door Mount keg tap beer single line, without CO2 tank. Everything is included right down to the last hose clamp.
Dual Beer Tower Dispenser – Draft Kegerator Tower Beer Dispenser Kit with 2 Faucet Tap Handles & Caps, Hose, Keg Wrench
- DOUBLE YOUR POURING POWER: Limiting yourself and your guests to pouring one beer on tap at your in-home bar is time consuming and frustrating
- The G. Francis Double Tap Draft Beer Tower is a beer faucets accessory that will double your pouring power and give your bar the finished feel you have been longing for
- USE YOUR EQUIPMENT: Inside lined with foam sheet for cooled tower systems insulation
- Tower stands 13.25 inches (33.7cm) tall (not including 3.1-inch/7.9cm tall tap handles) and has a 3-inch (7.6cm) diameter and 4.5-inch (11.4cm) base diameter
- 2.75-inch (7cm) center-to-center mounting hole distance (fits standard 3-inch/7.6cm hole pattern)
- Includes 2 separate 5-foot (1.5m) lengths of 3/16-inch (4mm) inside diameter (ID) (7/16-inch / 11mm OD) clear beer tubing with a 4.5-foot (1.4m) reach
- BUILT TO LAST: Constructed from polished silver stainless steel hardware and components, hard plastic faucet knob tap handles, and soft rubber faucet cap sanitary covers for maximum strength and longevity that resists rust and corrosion while preventing scratches and other damage
- Transparent hose is FDA approved 21CFR 175.300 PVC
- KEEP OUT CONTAMINANTS: Black faucet cap sanitary covers are the most simple and effective way to keep the faucets clean and are an essential part of draft faucet hygiene as it protects the faucets from insects and bacteria that could otherwise make their way into the spout of the faucet and into your drink
- Faucets (tap handles) are threaded and removable for easy cleaning and sanitizing
- PACKAGE CONTENTS: This beer faucet accessories package includes (1) double tap draft beer tower, (2) beverage tap flow control faucets, (2) faucet covers, (4) mounting hardware bolts, (1) tower gasket, (2) hose drink tubes, hose clamps, and a multi-purpose keg faucet wrench for your convenience
- Keg couplers required, not included
Kegco D4743DT-SS Double Tap SS Draft Beer Kegerator Tower – 3" Diameter
- Kegco Quality 304 Stainless Steel Beer Tower with Two Chrome Faucets
- 3″ Diameter Premium Quality 304 Stainless Steel Column
- Used with Air Cooled Beer Dispensing Systems
- Two Kegco Chrome-Plated Brass Faucets Installed
- Two 5′ Lengths of 3/16″ Clear Beer Tubing with Nozzle and Hex Nut Assemblies
This is a Polished Stainless Steel Single Column, Double Faucet, 3″ Diameter Draft Tower. This tower comes complete with two chrome-plated beer faucets and two separate 5″ lengths of 3/16″ clear beer tubing with nozzle and hex nut assemblies. It will connect to all standard keg couplers.
National Chemicals Deluxe Hand Pump Pressurized Keg Beer Cleaning Kit w/ 32 oz. Cleaner
- No need to remove your faucet, connects directly to your beer line!
- 1/2 Gallon High Pressure Cleaning Bottle
- 32 oz. Alkaline Beer Line Cleaning Solution
- Pressurizes from the bottom up so you can clean the faucet also
- Connects directly to the beer line coupling nut
Introducing the Kegco Deluxe Hand Pump Pressurized Cleaning Kit. No longer do you have to remove the faucet with this kit. You just unscrew the draft beer line off of the keg coupler and screw this directly to the cleaning kit. Includes a High Pressure Hand Pump Cleaning Bottle and a 32 oz. Bottle of BLC Draft Beer Line Cleaner and Nylon Beer Faucet Brush.
DOUBLE TAP DRAFT BEER TOWER – 2-TAP BEER COLUMN 13” HIGH 3” DIAMETER – STAINLESS STEEL BODY WITH UNIQUE BLACK SATIN FINISH – CHROME FINISH FAUCETS – BEERGON BT-1000
- TIRED OF THE SAME LOOKING BEER TOWER? BEERGON DOUBLE TAP DRAFT COLUMN is made of premium stainless steel with a unique black satin finish so you can distinguish yourself from your friend’s beer dispenser.
- YOU WISH THAT SOMETIMES YOU HAD A DIFFERENT BEER FLAVOR? NOW YOU CAN ! HAVE 2 beer FLAVORS poured from the same beer tower system at the same time ! It has high quality FDA-safe beer line (3/16” ID, 7/16” OD) that will not impart plastic flavors.
- YOU ARE WORRIED THAT IT MAY BE COMPLICATED TO INSTALL YOUR NEW TOWER? DO NOT FRET ! BEERGON DRAFT BEER TOWER IS SUPER EASY TO INSTALL on your tabletop and comes with all the hardware necessary to secure this column on your counter.
- ARE YOU CONCERNED THAT THE BEER TAPS WILL RUST? RELAX ! BEERGON BEER TAPS ARE SOLIDLY MADE and are installed and used in many bars and do not show signs of rust over many years !
- YOU THINK THAT A STANDARD 12-INCH TALL TOWER IS NOT HIGH ENOUGH FOR YOU? GOOD NEWS ! WE HAVE ADDED AN EXTRA INCH. Enjoy your 13-inch tall beer tower by pouring your beer into your extra-tall mugs !
BEERGON Beer Tower BT-1000 is made of premium stainless steel with a black satin finish so you can distinguish yourself from your friend’s beer towers. This double tap tower for your home allows you to have 2 beer flavors poured from the same tower at the same time and is equipped with a high quality FDA-safe beer lines (3/16” ID, 7/16” OD) that will not impart plastic flavors. BEERGON DRAFT BEER TOWER is super easy to install and comes with all the hardware necessary to secure this column on your counter. BEERGON BEER TAPS are solidly made and installed and used in many bars and do not show signs of rust over many years ! GET YOUR BEERGON BEER TOWER NOW, YOU DESERVE IT !
INSIDE THE PACKAGE:
One (1) beer tower cooler insulator
Two (2) faucets/taps
Two (2) tap handles (black)
Two (2) springs already inside the faucets
Two (2) 3-feet long beer lines already installed;
One (1) wrench
One (1) washer for the column base
Four (4) bolts to secure the base on the counter
SPECIFICATIONS:
Column height: 13”
Column diameter: 3”
Base diameter: 4-3/16”
Height from base to bottom of tap: 10”
Height from base to top of tap handle: 16.25”
FDA-safe beer lines (3/16” ID, 7/16” OD)
Faucet finish: Polished Chrome
Tower body color: Black satin
Standard Double Faucet Door Mount Kegerator Keg Tap Conversion Kit
Comes with all the basics required for a two tap mount into a kegerator wall or door, or refrigerator for the truly adventurous. Aluminum tank ships empty as per Federal Regulations. All tubing and connections required for assembly included.
Conclusion
By our suggestions above, we hope that you can found Two Tap Kegerator Kit for you.Please don’t forget to share your experience by comment in this post. Thank you!
Our Promise to Readers
We keep receiving tons of questions of readers who are going to buy Two Tap Kegerator Kit, eg:
- What are Top 10 Two Tap Kegerator Kit for 2020, for 2019, for 2018 or even 2017 (old models)?
- What is Top 10 Two Tap Kegerator Kit to buy?
- What are Top Rated Two Tap Kegerator Kit to buy on the market?
- or even What is Top 10 affordable (best budget, best cheap or even best expensive!!!) Two Tap Kegerator Kit?…
- All of these above questions make you crazy whenever coming up with them. We know your feelings because we used to be in this weird situation when searching for Two Tap Kegerator Kit.
- Before deciding to buy any Two Tap Kegerator Kit, make sure you research and read carefully the buying guide somewhere else from trusted sources. We will not repeat it here to save your time.
- You will know how you should choose Two Tap Kegerator Kit and What you should consider when buying the Two Tap Kegerator Kit and Where to Buy or Purchase the Two Tap Kegerator Kit. Just consider our rankings above as a suggestion. The final choice is yours.
- That’s why we use Big Data and AI to solve the issue. We use our own invented, special algorithms to generate lists of Top 10 brands and give them our own Scores to rank them from 1st to 10th.
- You could see the top 10 Two Tap Kegerator Kit of 2020 above. The lists of best products are updated regularly, so you can be sure that the information provided is up-to-date.
- You may read more about us to know what we have achieved so far. Don’t hesitate to contact us if something’s wrong or mislead information about Two Tap Kegerator Kit.
