onceownedby Finding your suitable readers for kegerator kit for sale is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best readers for kegerator kit for sale including detail information and customer reviews. Let’s find out which is your favorite one.
713 reviews analysed
Kegco BF STCK-5T Standard Tower Kegerator Conversion Kit with 5 lb Co2 Tank, Standard
- PRO SERIES DUAL GAUGE REGULATOR: Easily measure PSI and CO2 volume and adjust CO2 output pressure using this Kegco 542 Pro Series Double Gauge Regulator packed with premium features. The top gauge indicates output pressure, while the side gauge tells you what’s left in the CO2 tank, so you don’t run out of gas during a party. The Standard plated brass body has a large pressure adjustment knob for easy use and includes a manual pressure release valve.
- LEVER HANDLE KEG COUPLER: This NSF-approved Kegco KT85D-L “D” System Keg Coupler features a sturdy nickel-plated forged brass body with a stainless steel probe, and is designed for use with all domestic brand American D system Sankey kegs. The lever-handle design is easy to use
- simply pull out and then down on the handle to couple the keg. A 55-psi pressure relief valve makes this coupler even more convenient to use, allowing over-pressurized gas to escape before it enters your keg.
- SINGLE FAUCET DRAFT BEER TOWER: Featuring a beautiful Standard-plated metal finish and a matching Standard-plated faucet with metal lever, this 3″ diameter air-cooled draft beer tower is the same stylish tower used on most commercial grade kegerators. This tower conveniently includes 5 feet of clear beer tubing ending in a nozzle and hex nut assembly for quick connection to all standard keg couplers, as well as a gasket and four screws for easy mounting.
- STANDARD METAL BEER FAUCET WRENCH: This beer faucet spanner wrench is an essential tool that allows you to quickly and confidently loosen or tighten shank collars without scratching your faucets. This wrench has been built to last with a rugged all-metal construction and a convenient 5-1/4″ length.
- INCLUDES EMPTY 5 LB. ALUMINUM CO2 TANK: All of our brand new tanks are made from high strength aluminum alloy which is not as heavy as a steel tank and will not rust. These eye-catching tanks have a glossy red coating that acts as an extra layer of protection against corrosion and wear.
This Standard Tower Conversion kit is the perfect solution for those who are converting a compact refrigerator or converting a freezer into a kegerator. This kit comes with brand new, high quality draft beer components and contains everything you will need to successfully convert your compact refrigerator/freezer into a kegerator at great savings. Note: Beverage Factory is the only Authorized Reseller of Kegco Kegerator Kits (Other sellers are selling inferior kits that are not Warrantied or Quality Assured Kegco Quality.
Standard Double Faucet Door Mount Kegerator Keg Tap Conversion Kit
Comes with all the basics required for a two tap mount into a kegerator wall or door, or refrigerator for the truly adventurous. Aluminum tank ships empty as per Federal Regulations. All tubing and connections required for assembly included.
BACOENG A Tap Kegerator Door Refrigerator Conversion Kit No Tank
- 1. DUAL GAUGE REGULATOR: This unit weighs about 3 pounds and includes 2 rubber protective covers. It always tell you working pressure and tank pressure with pinpoint accuracy. A convenient knob style pressure dial that can be adjusted without tools. Shutoff valve with built in spring loaded check valve to prevent beer from flowing backward into the gas lines.
- 2. HANDLE D-SYSTEM KEG COUPLER: D-System Keg Coupler features a sturdy nickel-plated forged brass body with a stainless steel probe, and is designed for use with all domestic brand American D system Sankey kegs. The lever-handle design is easy to use – simply grip the handle and then down on the handle to couple the keg. A 55-psi pressure relief valve makes this coupler even more convenient to use, allowing over-pressurized gas to escape before it enters your keg.
- 3. CHROME BEER FAUCET WITH BRASS LEVER: Featuring a forged brass body and highly polished chrome finish, this beer faucet puts a stylish finishing touch on your kegerator at a price you’ll love.The brass shaft assembly and lever includes a non-stick ball washer for smooth operation, and the lever has standard threading that is compatible with most branded tap handles. This 4-1/8″ long beer shank with nipple assembly is constructed from chrome-plated brass and can be mounted through a 1″ hole.
- 4. METAL BEER FAUCET WRENCH: This beer faucet spanner wrench is an essential tool that allows you to quickly and confidently loosen or tighten shank collars without scratching your faucets.
Kegerator Conversion Kit with CO2 Tank (Convert a Refrigerator to a Kegerator)
This Kegerator Conversion Kit Includes: Single gauge Co2 regulator that features a solid forged brass body, wire mesh inlet filter, quad-ring inlet seal, built in pressure relief valve, 0-60 output gauge, and a 3/8″ O.D. outlet barb with shutoff. 4’ of red Thermoplastic super vinyl gas hose with clamps. American Sankey “D” system keg coupler that features a short lever handle, a built in pressure relief valve, and check valves for both the gas-in and liquid-out ports. 5’ long super vinyl beer hose assembly. This brewery approved hose will not rot, swell, or dry out and is unaffected by normal beer line cleaning chemicals. Pre-assembled with hex nut and neoprene washer on one end for connecting to keg coupler. 5 1/8″ long complete shank assembly. The one-piece construction prevents leaks, and the barbed fitting allows easy connection of the beer line assembly. Includes shank, forged brass locknut, plastic flange, coupling nut, sleeve, and snap ring. Premium quality chrome plated solid brass beer faucet. Features a chrome plated forged brass body, a Teflon lever washer for smooth consistent performance and easy operation, a solid brass faucet lever, and a chrome plated bonnet, shaft, and collar. Brand new aluminum 5 lb. CO2 cylinder (legally shipped empty). Aluminum cylinders are lightweight, durable, do not rust, and are easy to handle. Aluminum cylinders are also superior in quality compared to most steel cylinders found on the market.High gloss black plastic faucet knob. Faucet wrench for easy tightening the faucet to the shank. Complete, detailed easy to follow instructions for quick installation.
BACOENG Double Faucet Door Mount Kegerator Refrigerator Conversion Kit No Tank
- 1. DUAL GAUGE REGULATOR: It comes with an appropriate pressure dial that features the style of a knob for regulating pressure. With a weight of 3 pounds, the unit comes with rubber covers for protective purposes. You can use the gauge to know the pressure outside and inside the CO2 tank –you will not have to be worried that your gas might run out. It also has a shutoff valve that features a built-in spring for preventing the backflow of beer. Pressure Relief Valve Releases at 45PSI.
- 2. LEVER HANDLE KEG COUPLER: This refers to a D System Keg Coupler that has a strong construction made of nickel-plated forged brass. The probe, on the other hand, is made of stainless steel. The unit can be used alongside any domestic brand American D system Sankey kegs. It features an easy-to-use design, where you only need to pull the lever handle out and down, in that order, to couple the keg. The coupling of the keg is quite convenient with the availability of a 55-psi pressure relief valve
- 3. CHROME BEER FAUCET WITH BRASS LEVER: Featuring a forged brass body and highly polished chrome finish, this beer faucet puts a stylish finishing touch on your kegerator at a price you’ll love.The brass shaft assembly and lever includes a non-stick ball washer for smooth operation, and the lever has standard threading that is compatible with most branded tap handles. This 4-1/8″ long beer shank with nipple assembly is constructed from chrome-plated brass and can be mounted through a 1″ hole.
- 4. METAL BEER FAUCET WRENCH: You need the ideal wrench spanner for loosening or tightening shrank collars easily and quickly without the worry that you will scratch your faucets, and the standard metal beer faucet wrench is just the right tool. The all-mental sturdiness of this wrench makes it quite durable as well as ideal to handle any tightening or loosening needs. It is 5-1/4″ in length, which makes it easy to use on any surface.
- 5. STANDARD METAL BEER FAUCET WRENCH: You need the ideal wrench spanner for loosening or tightening shrank collars easily and quickly without the worry that you will scratch your faucets, and the standard metal beer faucet wrench is just the right tool. The all-mental sturdiness of this wrench makes it quite durable as well as ideal to handle any tightening or loosening needs. It is 5-1/4″ in length, which makes it easy to use on any surface.
3 Tap Chrome Wall Mount Home Brew Beer Kegerator Kit (Low Flat Rate Shipping)
This kit contains everything you would need to dispense three types of beer at once. Just make sure that the fridge you want to use is large enough to hold three kegs. The kegs must sit perfectly flat. Used to dispense home brewed beers. Does NOT include air tank. Easily convert this to hold your home brew kegs too. Features: * The triple tap chrome kit is a sleek and simple way to pour from 3 kegs * With our freezer thermostat any chest freezer can be converted to a kegerator to dispense your beer at ice cold temeperatures! Includes: * (3) Chrome faucet shanks * (3) Chrome beer Faucets * All the necessary hex nuts, washers, and tail pieces * Double gauge regulator * Triple product gas manifold * (3) plastic faucet knobs * Air lines and beer lines with connectors * (3) ball lock gas disconnects * (3) ball lock liquid disconnects * Does NOT INCLUDE air tank
Homecraft Black Stainless Steel Full-Size Kegerator Draft Beer Dispenser & Beer Cooler, Spring-Loaded Tap Dispenser, Holds 1/6, 1/4, 1/2 Barrels, 2.5-Pound CO2 Tank, Single Meter Regulator
- Large capacity: spacious 4. 9 Cu. Ft. Capacity holds 1/6, 1/4 (short and slim) and 1/2 barrels of beer, accommodating for large parties, recreational rooms, bars, barbecues, Mancaves and is garage ready!
- Stylish design: The Black Stainless Steel door gives it an elegant look and is featured with a hardtop pouring station, black tap Tower, removable drip tray and chrome guardrail. Comes with two adjustable wire shelves for your favorite canned or bottle beverages
- Recessed door handle: the recessed door handle provides a flushed finish with the door and the insulated rubber gasket inside keeps the cold in and the heat out
- Easy mobility: four casters at the bottom allow for the fridge to be easily transported from room to room and front casters can be locked to ensure the unit does not roll on hard floors
- Powerful cooling system: The adjustable thermostat has seven settings so you can keep it chilled to as low as 32 degrees, keeping a consistent temperature to keep your beer or other drinks ice cold
- Spring loaded tap: the 12-inch, black spring-loaded single tap Tower allows for an easy pull and release dispense, pouring a consistent draft beer every time
- Keg coupler: includes one American Sankey “D” Single tap system that stands up to heavy use and is specially designed with a lever handle that makes it more sturdy and reliable than other standard styled keg couplers
- Single-meter regulator for: durable constructed regulator features a shut-off and pressure relief valve, along with an easy-to-read pressure gauge that measures the PSI outflow from Co2 tank to keg (0-60 psi)
- 2. 5-Pound Co2 tank: kegorator comes with a 2. 5 lb. Co2 tank (unfilled), which fits in the Co2 tank holder in the back exterior to help maximize Refrigeration space
- Energy Star efficient: Trusted and backed by the doe by being energy-efficient to help save costs – Estimated at $32 yearly
Serve the thirstiest of crowds! Featuring a full size Black Stainless Steel 4. 9-Cubic foot capacity and a spring-loaded tap that makes dispensing easy. The included American Sankey “D” Keg coupler single-tap system and single meter regulator makes the beer flow with ease. Perfect for adding a unique element to backyard barbecues, Recreational rooms or the man Cave!
Kegco BF EBDCK-5T Conversion Kit, 1 Faucet with Tank, Deluxe
- DUAL GAUGE REGULATOR: Durably constructed to deliver a consistent flow pour after pour, this Kegco 762 Commercial Grade Double Gauge Regulator features a T-style adjustment valve that makes it easy to adjust the pressure inside of the keg. The gauge on top of the regulator indicates CO2 pressure in the keg, while the gauge on the side indicates the remaining volume of CO2 gas. A pressure release valve is conveniently located on the body.
- LEVER HANDLE KEG COUPLER: This NSF-approved Kegco KT85D-L “D” System Keg Coupler features a sturdy nickel-plated forged brass body with a stainless steel probe, and is designed for use with all domestic brand American D system Sankey kegs. The lever-handle design is easy to use – simply pull out and then down on the handle to couple the keg. A 55-psi pressure relief valve makes this coupler even more convenient to use, allowing over-pressurized gas to escape before it enters your keg.
- DOOR MOUNT STAINLESS STEEL DRIP TRAY: Our 6″ x 4″ door mount drip tray’s clean design, durable stainless steel construction, and attractive brushed finish have made it a favorite of beer lovers. Hassle-free from start to finish, this drip tray can be quickly and easily mounted using the two screw holes in the backsplash, and when you’re done dispensing for the day, a removable grill makes clean-up a breeze. This drip tray does not have a drain, so it will need to be emptied manually.
- HEAVY DUTY FAUCET WRENCH: Make repairs and adjustments to your draft beer system like a pro using this heavy-duty faucet wrench. This durable metal wrench has a vinyl coated red or blue handle that provides an easy grip while loosening or tightening shank collars, allowing you to quickly attach or remove your faucets without scratching them.
- INCLUDES EMPTY 5 LB. ALUMINUM CO2 TANK: All of our brand new tanks are made from high strength aluminum alloy which is not as heavy as a steel tank and will not rust! These eye-catching tanks have a glossy red coating that acts as an extra layer of protection against corrosion and wear.
With this Deluxe Kegerator Conversion Kit, Kegco provides everything you’ll need to quickly convert your refrigerator into a beer dispenser and begin dispensing delicious cold draft beer! From the durable commercial grade double gauge regulator to the NSF approved commercial-grade American D System keg coupler, every part is high quality and built to last, so you can dispense your own beer for years to come. We’ve even included a stainless steel drip tray that contains any drips, so cleaning up after every use is just as easy as the initial assembly! Detailed instructions are included in every kit.
Homecraft Black Stainless Steel Easy-Dispensing Tap Mini Kegerator Cooling System, Includes Reusable Growler, CO2 Cartridges, Removable Drip Tray & Cleaning Kit, Beer Fresh For 30 Days, 5-liter
- COMPATIBILITY Works with ALL standard 5-Liter pressurized and non-pressurized gravity kegs as well as the included reusable growler keg – perfect for hosting the big game or other small parties!
- STYLISH DESIGN The black stainless steel gives it an elegant look making it a good fit for any kitchen bar man cave basement or garage!
- FRESH BEER AT HOME Works with standard threaded CO2/N2O cartridges helping to keep beer fresh for 30+ days
- POWERFUL THERMOELECTRIC COOLING SYSTEM The LED adjustable temperature gauge ranges from 36 to 53 degrees and chills within 24 hours keeping drinks ice cold
- EASY DISPENSING The easy-tap handle allows for an easy pull and release dispense pouring a consistent draft beer every time
- REUSABLE GROWLER INCLUDED fill the reusable plastic clear 5-Liter growler keg with your favorite beer to keep it fresh for long
- QUIET OPERATION no is no compressor or vibration resulting in low noise
- CO2 CARTRIDGES three 16g Co2 cartridges are included and will work with any standard threaded Co2 or N20 cartridges
- REMOVABLE DRIP TRAY The stainless steel tray catches overflow of beer and removes for easy cleanup
- CLEANING KIT squeeze bottle Cleaning kit is included to keep beer lines fresh and clean
Refreshing craft beer straight from your countertop tap! Bring 5-liters of your favorite craft brew right into your kitchen and keep it cold and fresh for 30+ days after tapping Fill the included 5-Liter keg growler or use any standard pressurized or non-pressurized mini keg An easy-pull tap handle makes dispensing easy while a removable drip tray catches any drips
EdgeStar BR2001BL Ultra Low Temp Refrigerator for Kegerator Conversion
- Temp Range: Low 30’s to Mid 40’s
- Casters for easy mobility
- Store up to a full sized half shell Sankey standard keg.*Does not support use of Coors, Miller rubberized or other oversized kegs.
- Reversible door
- UL listed
- Protective floor plate for added durability
- Freestanding use only
- Weight: 81.6 pounds
- 115 Volts / 60 Hertz, 105 Watts, 1.5 Amps
- Can be converted to a fridge only with the included tower hole cap
The EdgeStar Ultra Low Temp Refrigerator for Kegerator Conversion (BR2001BL) is the refrigerator used to build the EdgeStar kegerator. This unit is designed to work with the beer line components and hardware included with the EdgeStar KC2000, and it’s great for your homemade kegerator project or for replacing the refrigerator unit of your kegerator only. The refrigerator unit is UL listed and stores up to a full-sized half shell Sankey standard keg. It features a reversible door and casters for easy mobility. EdgeStar full size kegerators are capable of reaching temperatures in the low 30s making them the coldest kegerators out of any on the market. It does not support the use of Coors or Miller rubberized kegs or other oversized kegs. Dimensions: 35″ H x 20″ W x 26 1/2″ D
Conclusion
By our suggestions above, we hope that you can found Kegerator Kit For Sale for you.Please don’t forget to share your experience by comment in this post. Thank you!
Our Promise to Readers
We keep receiving tons of questions of readers who are going to buy Kegerator Kit For Sale, eg:
- What are Top 10 Kegerator Kit For Sale for 2020, for 2019, for 2018 or even 2017 (old models)?
- What is Top 10 Kegerator Kit For Sale to buy?
- What are Top Rated Kegerator Kit For Sale to buy on the market?
- or even What is Top 10 affordable (best budget, best cheap or even best expensive!!!) Kegerator Kit For Sale?…
- All of these above questions make you crazy whenever coming up with them. We know your feelings because we used to be in this weird situation when searching for Kegerator Kit For Sale.
- Before deciding to buy any Kegerator Kit For Sale, make sure you research and read carefully the buying guide somewhere else from trusted sources. We will not repeat it here to save your time.
- You will know how you should choose Kegerator Kit For Sale and What you should consider when buying the Kegerator Kit For Sale and Where to Buy or Purchase the Kegerator Kit For Sale. Just consider our rankings above as a suggestion. The final choice is yours.
- That’s why we use Big Data and AI to solve the issue. We use our own invented, special algorithms to generate lists of Top 10 brands and give them our own Scores to rank them from 1st to 10th.
- You could see the top 10 Kegerator Kit For Sale of 2020 above. The lists of best products are updated regularly, so you can be sure that the information provided is up-to-date.
- You may read more about us to know what we have achieved so far. Don’t hesitate to contact us if something’s wrong or mislead information about Kegerator Kit For Sale.
