Best Gtx 780 Ti Water Cooling

The EVGA GeForce GTX 1080 Ti is NVIDIA’s new flagship gaming GPU, based on the NVIDIA Pascal architecture. The latest addition to the ultimate gaming platform, this card is packed with extreme gaming horsepower, next-gen 11 Gbps GDDR5X memory, and a massive 11 GB frame buffer. The EVGA GeForce GTX 1080 Ti delivers truly next-generation VR performance, the lowest latency and plug-and-play compatibility with leading headsets. It’s all driven by NVIDIA VRWorks technologies and brought to life with amazing VR audio, physics, and haptics. The next generation of EVGA Precision software has arrived with EVGA Precision XOC. This new version of Precision is built for the NVIDIA Pascal architecture and combines the best of EVGA Precision and EVGA OC Scanner to give you never before seen overclocking features and built in automatic overclocking tuning.

Powered by GeForce RTX 2080 NVIDIA Turing Architecture & Real Time Ray Tracing WATERFORCE Water Block Cooling System Metal Back Plate with RGB AORUS Logo Illumination 4 Years Warranty (Online Registration Required) Intuitive Controls with AORUS Engine Core Clock 1890 MHz 8GB 256-Bit GDDR6 3 x HDMI, 3 x DisplayPort, 1 x USB Type-C PCI Express 3.0 x16

Asus 1683 MHZ BOOST CLOCK FEATURIN (TURBO-GTX1070TI-8G)

The Thermosphere cooling engine uses similar, yet refined as per needs of modern microprocessors, fin design as its ancestor. The cooling liquid accelerates through jet plate’s nozzle and turbulently continues its path through numerous very thin channels which provide extreme cooling surface area. EK-Thermosphere can also work flawlessly with reversed water flow which does not affect the cooling performance. Base is made of nickel plated electrolytic copper, backbone is made from laser cut brushed stainless steel plate while the top is made of quality cast acrylic material. The sealing is ensured by quality rubber washers. Screw-in brass standoffs are pre-installed in each exchangeable mounting plate and allow for safe, painless installation procedure. Block is mounted with enclosed M3x4 DIN7985 screws. G1/4″ threaded fittings can be used on both sides of the FC terminal. Up to four EK-Thermosphere water blocks can be used on a single ATX form factor motherboard by using EK-FC Terminal (DUAL, TRIPLE or QUAD type) system or other means of interconnectivity. Please note that EK-FC Bridge & Link system is not compatible with this water block. GPU compatibility: EK-Thermosphere series waterblocks supports majority of modern nVidia and AMD high-end graphics cards via exchangeable mounting plates. The product however comes factory pre-fitted with mounting plate G80 (mounting pattern 58x58mm) and ready for use on modern nVidia GeForce GTX graphics cards only. Please check compatibility at EK’s CoolingConfigurator. To use this product on AMD and other nVidia graphics cards it is mandatory to purchase additional mounting plates: – G92: 53x53mm – R600: 54x54mm – GF560: 51x61mm – G200: 61x61mm Enclosed in the box: – EK-Thermosphere series water block /w pre-installed G80 mounting plate – mounting mechanism – thermal grease (TIM) EK-Ectotherm (1g)

The Kraken G10 is designed to nally bring high performance, cost-effective cooling to the GPU by incorporating existing all-in-one liquid cooling technology to a majority of video cards. The steel Kraken G10 bracket allows users to mount the NZXT Kraken coolers as well as non-NZXT brand liquid coolers to their GPU with ease. (See compatibility list for compatible coolers) With an included 92mm fan to cool the VRM and the high performance abilities of the Kraken cooler, the Kraken G10 offers over 40% cooling increases over stock coolers. Tests performed using a Kraken X40 and stock GTX-780Compatible Graphics Card NVidia : GTX 780 Ti, 780, 770, 760, Titan, 680, 670, 660Ti, 660, 580, 570, 560Ti, 560, 560SE AMD : R9 290X, 290, 280X, 280, 270X, 270 HD7970, 7950, 7870, 7850, 6970, 6950, 6870, 6850, 6790, 6770, 5870, 5850, 5830 The compatibility list is based on AMD Radeon and NVIDIA’s reference board layout, screw spacing and die height only. Please check the height restriction before purchase. Some variation in die thickness and height may cause issues with screws being too short to install on some AMD 290-based cards. Do NOT force the G10 to fit if your card is too thick, contact support for a revised screw set. Some variations in AMD die height may require the use of a shim. Compatible Liquid Coolers NZXT : Kraken X60, Kraken X40 Corsair : H105, H110, H90, H75, H55 , H50 Antec : KUHLER H2O 920V4, KUHLER H2O 620V4, KUHLER H2O 920, KUHLER H2O 620 Thermaltake : Water 3.0 Extreme, Water 3.0 Pro, Water 3.0 Performer, Water 2.0 Extreme, Water 2.0 Pro, Water 2.0 Performer Zalman : LQ-320, LQ-315, LQ-310

The Thermosphere cooling engine uses similar, yet refined as per needs of modern microprocessors, fin design as its ancestor. The cooling liquid accelerates through jet plate’s nozzle and turbulently continues its path through numerous very thin channels which provide extreme cooling surface area. EK-Thermosphere can also work flawlessly with reversed water flow which does not affect the cooling performance. Base is made of nickel plated electrolytic copper, backbone is made from laser cut brushed stainless steel plate while the top is made of quality cast acrylic material. The sealing is ensured by quality rubber washers. The top also features two pre-drilled slots for 3mm LED diodes. Screw-in brass standoffs are pre-installed in each exchangeable mounting plate and allow for safe, painless installation procedure. Block is mounted with enclosed M3x4 DIN7985 screws. G1/4″ threaded fittings can be used on both sides of the FC terminal. Up to four EK-Thermosphere water blocks can be used on a single ATX form factor motherboard by using EK-FC Terminal (DUAL, TRIPLE or QUAD type) system or other means of interconnectivity. Please note that EK-FC Bridge & Link system is not compatible with this water block. GPU compatibility: EK-Thermosphere series waterblocks supports majority of modern nVidia and AMD high-end graphics cards via exchangeable mounting plates. The product however comes factory pre-fitted with mounting plate G80 (mounting pattern 58x58mm) and ready for use on modern nVidia GeForce GTX graphics cards only. Please check compatibility at EK’s CoolingConfigurator. To use this product on AMD and other nVidia graphics cards it is mandatory to purchase additional mounting plates: – G92: 53x53mm – R600: 54x54mm – GF560: 51x61mm – G200: 61x61mm Enclosed in the box: – EK-Thermosphere series water block /w pre-installed G80 mounting plate – mounting mechanism – thermal grease (TIM) EK-Ectotherm (1g)

Model Name: BP-WBVGNGTX780ACIBK Stock : Available UPC Code :885488034909 EAN Code :4719552214907

The Glacier G1080Ti Asus STRIX is made from premium materials and finest standards of craftsmanship from Phanteks. From military standard Viton O-ring to the RGB LED lighting, all of our exceptionally high-quality materials are carefully selected. The water block features a nickel-plated copper cold plate, acrylic top and sandblasted cover plates for an elegant look.

The Optiplex has always been Dell’s flagship model. They were originally designed for heavy use in the corporate environment. They’re built with higher quality components than you’ll find in the typical off the shelf retail model. These are perfect for business or home. This computer has been fully refurbish. Every component is cleaned and tested for full functionality. Cosmetics are improved to show only minor wear. A fresh installation of Windows is performed with the included New license. This computer will arrive at your doorstep ready to use right out of the box. All necessary cables are included.

One (1) Brand New Aftermarket Replacement Water Pump (w/ Gasket & Seal) Fits David Brown Tractor models: 770 (S/N Up to E1879), 780, 880 (Livedrive, S/N Up to E24644), 880 (Non Livedrive, S/N Up to E2984), 885 (S/N E29639 & After). Comes with One K952713 (Water Pump w/ Gasket) & One K915330 (Seal). Part Numbers: K952713-seal, K952713, K262898, K949547, K915330
All OEM part numbers and logos are to be used for identification purposes only

Conclusion

By our suggestions above, we hope that you can found gtx 780 ti water cooling for you.Please don’t forget to share your experience by comment in this post. Thank you!