onceownedby 
Nowadays, there are so many products of wilo hot water recirculating pump in the market and you are wondering to choose a best one. You have searched for wilo hot water recirculating pump in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings wilo hot water recirculating pump which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
40,301 Reviews Scanned
BOKYWOX 110V 93W NPT3/4” 3-Speed Food Grade Home Recirculating Pump Hot Water Circulator Circulation Pump （RS15/6G）
- 1.Can be used directly in drinking water pipelines. The water taste of lubricating oil will disappear after 3 to 5 times of use. The shaft of pump should be kept horizontal after installation.
- 2.Max Pressure 11bar.Power Cord: 4.1ft. Liquid temperature range: 0℉ -+212℉
- 3.No leakage, low noise, environmental protection, aesthetics, ease of installation and so on.
- 4.Suitable for medium: Hot water and ethanol maximum ratio of 1:2. Not suitable for potable water.
- 5.Materials: Pump housing: Cast Iron
- Impeller: Corrosion-resistant, Composite, PES
- Shaft: Ceramic
- Bearing: Carbon axial.
Specifications:
Rated Power:93/67/46W
Outlet:3/4 inch
Max Flow:36/29/20 L/min
Rated Head:20/16/13m
Volt/Freq:110-120V/60Hz
Application:
Used in Suitable for city buildings, suburban villas, houses, water and pressurized with industrial equipment,air conditioning,boilers,solar circulating water, hot water circulating warm and so on.
Advantages:
No leakage,low noise, environmental protection, aesthetics,ease of installation and so on.
Features:
High temperature resistance, antifraying,long life,maintenance-free,super silent,leak-tightness,high efficiency,low consumption,high flow and convenient installation advantages.
Performance Datas:
1).Suitable for medium: Hot water and ethanol maximum ratio of 1:1.
2).Performance: Liquid temperature range 0℉ – +212℉Maximum working pressure 10bar.
3).Ambient temperature: not higher than 40.
4).Voltage:110-120V(±10%) ,Frequency: 60Hz.
5).Motor: Protection class IP44 Insulation class F.
6).Material: Cast iron,PP,ceramics.
7).Mounting position: Shaft horizontal mounting.
8).Pump settings: Single-phase pipeline pump 3 files manually controlled single-phase motor is not overloaded casting pump length 130 mm.
Similar items with 4 stars and above
BOKYWOX 110-120V 3/4”,3-Speed Food Grade Domestic Circulation Pump Hot Water Circulator Circulating Pump (RS15-6SG)
- 1.Can be used directly in drinking water pipelines. The water taste of lubricating oil will disappear after 3 to 5 times of use. The shaft of pump should be kept horizontal after installation.
- 2.Max Pressure 11bar.Power Cord: 4.1ft. Liquid temperature range: 0℉ -+212℉
- 3.No leakage, low noise, environmental protection, aesthetics, ease of installation and so on.
- 4.Suitable for medium: Hot water and ethanol maximum ratio of 1:2. Not suitable for potable water.
- 5.Materials: Pump housing: Cast Iron
- Impeller: Corrosion-resistant, Composite, PES
- Shaft: Ceramic
- Bearing: Carbon axial.
Century 7 Day Heavy Duty Digital Programmable Timer – Dual Outlet (Indoor)
- ✓ VERSATILE & CUSTOMIZABLE: Easily set up to 8 on/off programs for the timer’s two grounded outlets. Outlets are controlled simultaneously, and settings can be as short as one minute.
- ✓ JUST SET & GO: Choose your own individual days or simply select one of the convenient pre-set combination days. Switch to Daylight Savings mode with a press of a button. Our long-lasting backup battery keeps your settings even in the event of a power outage.
- ✓ PROTECT YOUR HOME: Activate the “Random” Vacation mode to randomize your programmed lights. Make your home look “lived in” even when you’re away.
- ✓ SAVE ENERGY & MONEY: Save costs on electricity and extend the life of your appliances. Use for lights, coffee machines, cell phone chargers, hydroponics, heat, A/C, and other electronics
- ✓ SAFE & RELIABLE: This timer is UL listed and rigorously controlled for quality and safety. Rating: 115V, 60 Hz, 15A/1725W
Century 7 Day Heavy Duty Digital Programmable Timer – Dual Outlets can control your system every day, every several days, or several times per day! The timer allows up to 8 on/off times per day, a one (1) minute minimum “on” time, and different settings for different days. The timer is a great way to keep everything on track and promote the healthy growth of your plants and flowers. It’s three prong grounded, has an LCD digital display for easy operation, includes a battery backup, and has a dual outlet feature so you don’t lose a plug. These timers are great for lights or hydroponic systems. Using timers to automate your hydroponic garden adds convenience and encourages productive growth of your plant. Timers allow you to provide a consistent light, nutrient, and airflow program for your garden. The battery backup assures you stay on schedule even after a power outage. If you have any question, please contact us: [email protected]
Watts 500800 Instant Hot Water Recirculating System with Built-In Timer, Easy to Install
- WATTS HOT WATER RECIRCULATING PUMP: Provides hot water at every faucet or shower when needed, eliminating wasted water , 0.5 inches bypass value
- BEST SELLER RECIRCULATING SYSTEM: Conserve Water – Up to 15,000 gallons of water per year. Save Money – Up to 10% of your water bill and its cost only 5 a day to operate
- EAST TO INSTALL: This unique product connects easily to existing plumbing. Easy to install in less than 1 hour. And it is maintenance free
- WATTS HOT WATER RECIRCULATING SYSTEM: The Kit Includes: Pump with timer, 2 adapters with rubber washers, valve mounting screws, sensor valve, two 12-inch supply lines
- RECIRCULATING PUMP WITH TIMER: 24-hour programmable timer activates pump when you need it. And it is extremely quiet compared to other system in the market – no vibrations. Do not use with tankless water heaters. Insert the 115V plug on the line cord from the pump into a properly grounded 115V outlet
Product Description
Specification:
- Voltage: 120 volts
- Item Weight: 8.5 pounds
- Overall Dimension: 6.2 x 6 x 5 inches
- Size: Full
- Color: Blue
- Material: Case
- Warranty: 1 Year
Never wait for hot water again! The Watts Hot Water Recirculating Pump provides hot water at every faucet or shower when needed, eliminating wasted water. It is easy to install on any water system and requires no additional piping. The unique design of the pump ensures quiet, maintenance-free operation. The system includes a built-in 24 hour, a dual setting programmable timer to activate the pump only when needed. System that provides instant hot water to every faucet or shower in a home when you need it. Stop throwing money down the drain and waiting for your hot water.
From the Manufacturer
The Watts Premier hot water recirculation pump puts hot water at every tap when you want it. Saves up to 15,000 gallons per year. The pump brings convenience and savings to your home, giving you hot water instantly at every faucet, when you need it. This unique product is easy to install and not only provides you with the convenience of hot water when you need it, but saves an average of over 11,000 gallons per year. *May not work with a tankless water heater.
Happybuy RS15-6 Hot Water Recirculating Pump 110V Circulation Pump 3/4-Inch NPT 3-speed Recirculation Pump 9.5 Gpm for Water Heater System
- 【MAIN PARAMETER】 – The hot water circulation pump features NPT 3/4 inch (19.05 mm) inlet/outlet. Voltage/Frequency: 110-120V, 60Hz. Rated power: 93/67/46 W. Max pressure: 145 psi (10 bar),the hot water circulation pump with three-speed control. Flow: 36/29/20 LPM (9.5/7.66/5.28 GPM). Max head: 6/4.9/4 m (20/16/13 ft)
- Pump housing: Aluminum. Impeller: Corrosion-resistant, composite, PES. Shaft: 45 # steel. Bearing: Carbon axia
- 【CONVENIENT】 – Easy installation, just need a wrench to connect the pump to the pipeline, saving you the cost of plumbers
- Instant hot water, waiting for 2-3 minutes in the past, now it takes only 15 seconds to get hot water (the kitchen takes about 1 minute to get hot water due to low flow restriction)
- 【HUMANIZED DESIGN】 -Prevent pipes from freezing in winter, especially for cold winter areas. In addition, if your pipes pass through the floor, the floor will also become warm.
- 【ADVANTAGE】 – The hot water circulation pump features high efficiency with low consumption. High temperature resistance, anti-fraying, high flow and leak-tightness. Super silent, environmental friendly,saving energy, running power, reducing the waste of cold water and waiting time, suitable for water scarce areas, such as desert areas
- 【WIDE APPLICATION】 – Our hot water circulation pump RS15-6 is suitable for a wide range of applications, for city buildings, suburban villas, houses, water and pressurized with industrial equipment, air conditioning, boilers, solar circulating water, hot water circulating warm and so on
Watts Premier 560075 Sensor Valve Kit for Hot Water Recirculating System
- Additional Sensor Valve Kit for use on branched hot water lines with Watts Premier Hot Water Recirculation Pumps coming from the water heater. Kit comes complete with one sensor valve, two 12 inch supply lines with fittings.
- Compatibility: This valve works only with models 500800, 500803, 500805, and 500899.
- This kit must be used in conjunction with either a 500800 or 500805 Hot water Recirculating Pump. It is NOT designed to be used with a dedicated return line to the water heater.
- Features: Thermal By-Pass Technology
- Product Dimensions: Width: 1 3/8 inches, Length: 4 5/16 inches
This additional sensor valve is for homes with a branched hot water line. The kit includes a sensor valve and two 12 inch supply lines with adapter fittings. If your home has a branched hot water line simply install this sensor valve kit at the end of the branched line. No additional pumps are needed. Must have the Watts Instant Hot Water Recirculation Pump installed.
Watts Premier WP367010 Sensor Valve for Watts Hot Water Recirculating Pump (0955800), Plain
- CONTENTS: Includes a sensor valve
- SPECIFICATIONS: 1/2 inch MPT connections on the Sensor Valve
- COMPATIBILITY: The WP367010 Sensor Valve is only for use with Watts Instant Hot Water Recirculating System. It is not designed to be used with a dedicated return line to the water heater
- EASY INSTALLATION: Easy to install with no additional pumps needed. Additional sensor valve for branched hot water lines
This sensor valve replacement is for the Hot Water Recirculation System. No additional pumps are needed. Must have the Watts Instant Hot Water Recirculation Pump installed.
Grundfos GRU-595916 595916
- TLC = Timer, Line Cord, 6-Foot
- Flow range: 0 – 9 U.S. GPM, Head range: 0 – 6-Foot
- Motors: Single phase, 115V. Supply Voltage:115-120 VAC, 60 hertz, Contact Rating: 16 amps
- Connection: 3/4-Inch M by 3/4-Inch FNPT.Maintenance-free, low energy consumption, easy to install, quiet running
- The Grundfos circulator pumps, Series UP, are specifically designed for heating systems. The pumps are also suitable for circulation of hot domestic water and for circulation of liquid in cooling and air-conditioning systems
Product Description
Up1510su7ptlc features: -Recirculator pump kit.-Material: Bronze and stainless steel.-Aluminum stator housing.-Stainless steel spherical separator.-Stainless steel / tungsten carbide rotor.-Stainless steel, epdm, pu, ptfe, graphite rotor and impeller.-Brass ms 58 pump housing.-Ppo isolation valve.-Pa66/6 terminal box cover, motor cover.-Lexan light.-Pvc cable, cable relief.-Epp 55 insulating cover.-Epdm o’rings.-Pom check valve.-Proud to bring the comfort and savings of hot water recirculation to the existing homes market with the comfort series instant hot water system.-Stainless steel circulator, complete with timer and 10-foot power cord, is installed directly to the hot water discharge on the water heater.-Comfort valve is installed under the sink at the fixture furthest from the water heater, and the system uses the existing cold water line to return hot water to the water heater.-Circulator pumps, series up, are specifically designed for heating systems.-Suitable for circulation of hot domestic water and for circulation of liquid in cooling and air-conditioning systems.-Wet rotor design.-Composite impeller.-Eliminates and prevents corrosive effects of fresh water.-Maintenance-free, low energy consumption, easy to install, quiet running.-Improved performance and efficiency.-Pre-program usage times to save power.-No additional wiring required.-Adds to savings by operating pump by sensing the water temperature.-Insulation class: F.-Flow range: 0 – 65 us gpm.-Head range: 0” – 72”.-Maximum fluid temperature: 150 f (66 c).-Minimum fluid temperature: 36 f (2 c).-Maximum working pressure: 145 psi.-Connection: 075” m x 075” fnpt.-Tlc : Timer, line cord. Includes: -Includes timer and line cord.-Comfort system includes a up15-10su7/tlc circulator and the revolutionary comfort valve. Specifications: -Up15-10su7p/tlc comfort series 1/25 hp recirculator.-Recirculator engine: 1/25 hp.-Power consumption: 25watts.-Motors: Voltage: 115volts, phase: 1. Dimensions: -Dimension.
From the Manufacturer
The Grundfos UP15-10SU7P/TLC Comfort Series 1/25 HP Recirculator Pump is a Comfort Series Instant Hot Water System. Includes timer and line cord. Grundfos Pumps is proud to bring the comfort and savings of hot water recirculation to the existing homes market with the Comfort Series Instant Hot Water System. The Comfort System includes a Grundfos UP15-10SU7/TLC circulator and the revolutionary Comfort Valve. The stainless steel circulator, complete with timer and 10-foot power cord, is installed directly to the hot water discharge on the water heater. The Comfort Valve is installed under the sink at the fixture furthest from the water heater, and the system uses the existing cold water line to return hot water to the water heater. The Grundfos circulator pumps, Series UP, are specifically designed for heating systems. The pumps are also suitable for circulation of hot domestic water and for circulation of liquid in cooling and air-conditioning systems.
bayite BYT-7A015 DC 12V Solar Hot Water Heater Circulation Pump with DC Power Supply Adapter Low Noise 3M Head 8LPM 2.1GPM
- Circulation pump is non-self-priming pump (0 Suction Height). Max Flow Rate: 2.1GPM, Max Discharge Head: 9.8ft. Max system pressure: 10Bar(145PSI) . This doesn’t mean the pump produces 145PSI. It means the pump can be connected to the system less than 145PSI pressure
- 1/2″ Male thread on the pump. The OD of the brass coupler is 3/8”(10mm). Plug type: 2.1mm x 5.5mm female
- Power source: DC 12V(POWER ADAPTER INCLUDED). Rated current: 0.7A, Brushless Motor, Low noise: 30db at 1 metre, Service life: 30000 hours. Please note: If you use this pump for circulating wort it should be cleaned out after using it
- Max circulating water temperature: 100°C/212°F. It’s submersible but can’t be immersed in hot water exceeding 50°C/122℉
- One year warranty: replacement or full refund without return
It’s perfect for the home solar water heating systems or other circulation pump application.
Brushless Motor,Super long working life,low consumption and low noise
Power source: DC 12V
Rated current: 0.7A
Low noise: 30db at 1 metre
Service life: 30000 hours up
Inlet/Outlet: 1/2″ male thead. Fit both 1/2″ NPT and BSP female thead. We’ve tested. w/ two brass coupler
Circulation pump is non-self-priming pump (0 Suction Height).
Max Flow Rate: 8L/Min(2.1GPM)
Max Water Head: 3 metre(9.8ft)
Max system pressure: 10Bar(145PSI). This doesn’t mean the pump produces 145PSI. It means the pump can be connected to the system less than 145PSI pressure.
Max circulating water temperature: 100°C/212°F. Can’t be immersed in hot water exceeding 50°C/122℉
Please note: If you use this pump for circulating wort it should be cleaned out after using it.
Item included:
1x DC 12V Solar Hot Water Circulation Pump
1x AC 110V- 240V to DC 12V 2A Power Supply Adapter
Conclusion
By our suggestions above, we hope that you can found wilo hot water recirculating pump for you.Please don’t forget to share your experience by comment in this post. Thank you!
