onceownedby 
Nowadays, there are so many products of solar heating water system in the market and you are wondering to choose a best one. You have searched for solar heating water system in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings solar heating water system which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
Solar Water Heating–Revised & Expanded Edition: A Comprehensive Guide to Solar Water and Space Heating Systems (Mother Earth News Wiser Living Series)
Smartpool S601P SunHeater Solar Heating System for In Ground Pool
- Keep your pool warm with a polypropylene heat collector. Direct Flow System – One Header Hole for Each Heating Tube
- Solar heater features 80 square feet of solar panels
- Pool accessory is perfect for heating any in-ground swimming pool
- Panel array measures 4 feet wide x 20 feet long. Raises Pool Water Temperature 6-10°F (4-6°C)
- Installation kit required (Sold Separately)
Smart pool Sun Heater High Density 4’x20′ (80 sq. ft.) Solar Heater for In Ground Pools can be mounted on roof.
SunHeater S120U Universal Solar Pool Heater 2 by 20-Feet
A Sun Heater solar heating system is the , cost effective way to warm your pool. Capture free heat from the sun’s rays to raise your water temperature 6-10 degrees F! Can add weeks to you pool season. Universal system is suitable for both in ground or above ground pools.
Complete 4 Panel Hybrid Solar Water Heater Kit
Our 4 Panel Hybrid Solar Water Heating Kit allows you to install your 4 panel solar water heater system in record time. Based on our new and improved SW-38 Solar Water Heater panels, you simply thread the panels together.
No more external connection pipes for multi panel installations! Each panel weighs slightly over 12 lbs. and is 24" by 24" but can still provide you with ample hot water. With this kit you DO NOT have to solder at all!
Please Note: This System will not work with Marathon non metallic water heaters and is NOT freeze protected. If you experience freezes you either have to drain the system
or consider our GS and GH type Solar Water Heating Systems.
Each kit comes with:
4 SW-38 Panels
All fittings, Adapters, and Connectors, Wire
1 TopsFlo TD5 Stainless Steel Pump
1 Bottom Feed Connector to connect directly to your existing water heater
1 10W PV panel to power the pump – NO grid connection required
Installation Intructions
All You have to supply is:
Your choice of 1/2" Pipe from the panels to the water heater(Copper, CPVC, or PEX)
Fasteners to attach the panels to the roof, and the parts to feed the pipes through the roof if needed.
Insulation for the pipes.
Your existing Water Heater
Tools needed for installation
BACOENG 3/4” 110V/115V Hot Water Circulation Pump/Circulator Pump For Solar Heater System With US Plug
- Flexible Application – Directly Used in Floor Heating System and Hot Water Recirculating System. Also a Wise Choice for DIY: Add a timer to be more energy saving. Add a bridge valve to be used in no return pipe system.
- SMART Connector: 5.5 Ounces Lead-Free Brass Fitting. Smart Design Shortens the setup or disassembly time to within 10 seconds. 1/2″ Deep Thread prevent the Tube from leaking.
- FEATURES: Built-in high sensitive electronic sensors with three-speed control. High temperature resistance. Super silent, environment friendly.
- Material: Pump housing: Cast Iron
- Impeller: Corrosion-resistant, Composite, PES
- Shaft: Ceramic
- Bearing: Carbon axial
- Rated Power:93/67/46W Inlet/Outlet:3/4” Voltage/Frequency:115V/60HZ Installation length:5.1inches Liquid temperature range:32 – 230℉
KOLERFLO 3/4 Inch Hot Water Circulating Pump 3-Speed Circulation Water Pump for Solar Heater System(RS15-6 Red)
- Rated power: 93/67/46 W. NPT 3/4 inch (19.05 mm) inlet/outlet. Voltage/Frequency: 110-120V, 60Hz. Max pressure: 145 psi (10 bar),the circulation pump with three-speed control. Flow: 36/29/20 LPM (9.5/7.66/5.28 GPM). Max head: 6/4.9/4 m (20/16/13 ft)
- Pump housing: Aluminum. Impeller: Corrosion-resistant, composite, PES. Shaft: 45 # steel. Bearing: Carbon axia.
- Easy installation, only need a wrench to connect the pump to the pipeline, saving you the cost of plumbers
- Instant hot water, waiting for 2-3 minutes in the past, now it takes only 15 seconds to get hot water.
- Prevent pipes from freezing in winter, especially for cold winter areas. In addition, if your pipes pass through the floor, the floor will also become warm.
- The circulation water pump features high efficiency with low consumption. High temperature resistance, anti-fraying, high flow and leak-tightness. Super silent, environmental friendly,saving energy, running power, reducing the waste of cold water and waiting time, suitable for water scarce areas, such as desert areas.
- KOLERFLO circulation water pump RS15-6 Used in Suitable for city buildings, suburban villas, houses, water and pressurized with industrial equipment, air conditioning, boilers, solar circulating water, hot water circulating warm and so on.
Product Details
Model: RS15-6
Rated Power: 93/67/46W
Outlet: 3/4 inch
Max Flow: 36/29/20L/min
Rated Head: 20/16/13m
Volt/Freq: 110-120V/60Hz
Applications
Used in Suitable for city buildings, suburban villas, houses, water and pressurized with industrial equipment, air conditioning, boilers, solar circulating water, hot water circulating warm and so on
Advantages
1.High efficiency, high flow, leak-tightness, low consumption
2.No noise environmental protection, ease of installation
3.No leakage, low noise, environmental protection, aesthetics, ease of installation and so on
4.Built-in high sensitive electronic sensors with three-speed control
Performance Datas
1) Suitable for medium: Hot water and ethanol maximum ratio of 1:1
2) Performance: Liquid temperature range: 0℉ – +212℉Maximum working pressure 10bar
3) Ambient temperature: not higher than 40
4) Voltage: 110-120V(±10%) ,Frequency: 60Hz.
5) Motor: Protection class IP44 Insulation class F
6) Material: Stainless Steel, PP, ceramics
7) Mounting position: Shaft horizontal mounting
8) Pump settings: Single-phase pipeline pump 3 files manually controlled single-phase motor is not overloaded casting pump length 130 mm
Similar items with 4 stars and above
BOKYWOX 120W 110-120V Food Grade Automatic Circulator Booster Pump NPT3/4” Stainless Steel Domestic Hot Water Circulation Pump （RS15/9SR）
- 1.No leakage,low noise,environmental protection,aesthetics,ease of installation and so on.
- 2..Automatic circulation pump,Suitable for medium: Hot water and ethanol maximum ratio of 1:1.
- 3.High temperature resistance, anti-fraying ,high efficiency, high flow.
- 4.Liquid temperature range 0℉ – 212℉ Maximum working pressure 6bar.
- 5.Can be used directly in drinking water pipelines. The water taste of lubricating oil will disappear after 3 to 5 times of use. The shaft of pump should be kept horizontal after installation.
Similar items with 4 stars and above
bayite BYT-7A015 DC 12V Solar Hot Water Heater Circulation Pump with DC Power Supply Adapter Low Noise 3M Head 8LPM 2.1GPM
- Circulation pump is non-self-priming pump (0 Suction Height). Max Flow Rate: 2.1GPM, Max Discharge Head: 9.8ft. Max system pressure: 10Bar(145PSI) . This doesn’t mean the pump produces 145PSI. It means the pump can be connected to the system less than 145PSI pressure
- 1/2″ Male thread on the pump. The OD of the brass coupler is 3/8”(10mm). Plug type: 2.1mm x 5.5mm female
- Power source: DC 12V(POWER ADAPTER INCLUDED). Rated current: 0.7A, Brushless Motor, Low noise: 30db at 1 metre, Service life: 30000 hours. Please note: If you use this pump for circulating wort it should be cleaned out after using it
- Max circulating water temperature: 100°C/212°F. It’s submersible but can’t be immersed in hot water exceeding 50°C/122℉
- One year warranty: replacement or full refund without return
It’s perfect for the home solar water heating systems or other circulation pump application.
Brushless Motor,Super long working life,low consumption and low noise
Power source: DC 12V
Rated current: 0.7A
Low noise: 30db at 1 metre
Service life: 30000 hours up
Inlet/Outlet: 1/2″ male thead. Fit both 1/2″ NPT and BSP female thead. We’ve tested. w/ two brass coupler
Circulation pump is non-self-priming pump (0 Suction Height).
Max Flow Rate: 8L/Min(2.1GPM)
Max Water Head: 3 metre(9.8ft)
Max system pressure: 10Bar(145PSI). This doesn’t mean the pump produces 145PSI. It means the pump can be connected to the system less than 145PSI pressure.
Max circulating water temperature: 100°C/212°F. Can’t be immersed in hot water exceeding 50°C/122℉
Please note: If you use this pump for circulating wort it should be cleaned out after using it.
Item included:
1x DC 12V Solar Hot Water Circulation Pump
1x AC 110V- 240V to DC 12V 2A Power Supply Adapter
bayite BYT-7A014A DC 12V Solar Hot Water Heater Circulation Pump with DC Power Supply Adapter Low Noise 3M Head 8LPM 2.1GPM
- Circulation pump is non-self-priming pump. Max Flow Rate: 2.1GPM, Max Discharge Head: 9.8ft
- 1/2″ Male thread on the pump. The OD of the brass coupler is 10mm. Plug type: 2.1mm x 5.5mm female. NO POWER ADAPTER INCLUDED
- Power source: DC 12V(Comes with a AC 110v to DC 12v power adapter), Rated current: 0.7A, Brushless Motor, Low noise: 30db at 1 metre, Service life: 30000 hours
- Max circulating water temperature: 100°C/212°F. It’s submersible but can’t be immersed in hot water exceeding 50°C/122℉
- One year warranty: replacement without return
It’s perfect for the home solar water heating systems or other circulation pump application.
Brushless Motor,Super long working life,low consumption and low noise
Power source: DC 12V
Rated current: 0.7A
Low noise: 30db at 1 metre
Service life: 30000 hours up
Inlet/Outlet: 1/2″ male thead. Fit both 1/2″ NPT and BSP female thead. We’ve tested. w/ two brass coupler
Max Flow Rate: 8L/Min(2.1GPM)
Max Water Head: 3 metre(9.8ft)
Max system pressure: 10Bar(145PSI)
Max circulating water temperature: 100°C/212°F. Can’t be immersed in hot water exceeding 50°C/122℉
Item included:
1x bayite DC 12V Circulation Water Pump
1x AC 110v to DC 12v power adapter
Conclusion
By our suggestions above, we hope that you can found solar heating water system for you.Please don’t forget to share your experience by comment in this post. Thank you!
