The 10 Best Snake Heating Pad With Thermostat

“The iPower heat mat thermostat provides constant customized temp seed germination, reptiles and brewing. It is ideal for maintain rooting temperature in a tray and dome. Ideal in homebrewing for maintaining desired fermentation temperature, and perfect for temperature control in reptile terrariums and small pet enclosures. This heat mat controller is compatible with all heat mats, but is optimized for iPower seedling heat mats. Features: 1.Controls temperature in colder or warmer environments 2.Digital temperature controller for heat mat 3.Provides constant optimum temperature for specific crops 4.Digital thermostat provides temperature control between 40°F-108°F (5-42°C), temperature display range: 32 -140°F 5.Celsius or Fahrenheit read-out 6.Specs: 120 Volts / 8 Max Amps / 60 HZ / 1000 Watts 7.Easy plug-in operation with LED illuminated indicator lights & three-prong ground plug 8.CETL certification is proof that a product complies with widely-accepted safety standards 9.1 Year Manufacturer Warranty Seeding Heat Mat Setup Instructions： Place sensor into the rooting area about 1″”- 1-1/2″” Position thermostat up and away from seedling trays and stray water. Do not submerge Plug heat mat into thermostat Plug in thermostat power cord and set maximum desired temperature Heat mat thermostat can also be used to control the temperature of many other appliances as long as they don’t exceed the maximum electrical specifications stated above. Simply place the sensors in the area where the temperature needs to be controlled plug the appliance into thermostat, and set the desired temperature. NOTE: Please note that the controller can only be used to power off heating equipment at setting temperature and does not increase the heating power of the heating equipment. Abnormal Warning： If thermostat shows “”E1″”, it means that the actual temperature is lower than 0 degree Celsius or 32.0 degrees Fahrenheit If thermostat shows “”E2″”, it means that the actual temperature is higher than 60.0 degrees Celsius or 108.0 degrees Fahrenheit If thermostat shows “”E3″”, it means that the temperature sensor is not working properly. Please re-install the sensor”

Inkbird day and night temperature controller is a pre-wired heating output temperature controller (No Cooling Control) with time function specifically for breeding and planting.
It can be set to two different temperatures with its function of dual time cycle setting during 24 hours according to the day and night, which can more suitable for the physiological needs of animals and plants.
It can be widely use in over-heat protection and automatic temperature control system of all sorts of electrical equipment for aquarium, pets breeding, hatching, fungus fermenting, and seed germination accelerating, etc.
With large power output 1,200W, it’s suitable for most applications. And the temperature can be controlled more accurately with its function of temperature calibration and temperature hysteresis.

Specification:
Temperature Control Range: -50~99 °C / -58~210 °F
Temperature Resolution: 0.1 °C / 0.1°F
Temperature Accuracy:±1°C (-50~70°C) / ±1°F (-58~160°F)
Input Power : 100~240VAC, 50Hz/60Hz
Temperature Control Output: Max. 10A, 100V ~240V AC
Ambient Temperature: -30~ 75 °C / -22~ 167 °F
Storage Temperature: -20~ 60 °C / -4~ 140 °F
Humidity: 20~85% (No Condensate)
Sensor Type: NTC sensor (Including)
Sensor Length: 2m / 6.56ft
Relay Contact Capacity: Heating (10A, 100-240VAC)
Input Power Cable Length: 1.5m (5ft)
Output Power Cable Length: 25cm (1ft)
Body Dimension: 140x68x33mm (5.5×2.7×1.3 inch.)
Socket Dimension: 85x42x24mm (3.3×1.7×1 inch.)
Warranty: 1 Year

Package Included:
1 x Temperature and Time Controller
1 x Manual

Give your pet the extra heat it needs. Fluker’s Heat Mat’s durable construction provides uniform, evenly distributed heat. Easy to use and safe for all reptiles and amphibians. For use outside your pet’s enclosure. Can be mounted under or on side of your pet’s enclosure. **If mounted below enclosure, make sure there is only a thin layer of substrate in tank and there is proper ventilation to prevent heat buildup which can damage your enclosure or create a fire hazard. Side mounting is recommended for enclosures with no bottom ventiliation and/or thick or heavy substrate.**

AUOKER reptile heating pad with temperature control, adjustable heat mat for reptiles turtle, tortoise, snakes, lizard, gecko, spider, mammals, crawler – safety turtle aquarium terrarium heater (5w/ 7w/ 20 w).

Give your pet the extra heat it needs. AUOKER's Heat Mat's durable construction provides uniform, evenly distributed heat. Easy to use and safe for all reptiles and amphibians. For use outside your pet's enclosure. It can be mounted under or on side of your pet's enclosure.

Feature
– Regulating switch;
– Low power consumption;
– Enclosed circuit, leak-proof;
– Uniform heat dissipation, waterproof;
– Safe to use, won't hurt your lovely pet;
– Pad can be used under a tank or vivarium;
– Suitable for Turtle, Snakes, Lizard, Gecko, Spider, Small mammals, Crawler, etc;

Specification
– Material: PET;
– Weight: 5 W-95 g/ 3.35 oz, 7 W-115 g/ 4.06 oz, 20 W-168 g/ 5.93 oz;
– Color: Black;
– Plug Style: US Plug;
– Voltage Range: 100v- 120v;
– Regulating Range: 0-35 Degree;
-Size:
5 W – 15 x 14 cm/ 5.91 x 5.51 inches;
7 W – 15 x 28 cm/ 5.091 x 11.02 inches;
20 W – 42 x 28 cm/ 16.54 x 11.02 inches;

Kindly Reminder
The reptile heater mat is slightly waterproof, do not immerse it in water or long-term in high-temperature environment, so as not to cause electrical short-circuit and burn hazards.

Package include
1 x Adjustable Reptile Heating Pad/ Mat(US Plug);

Zoo Med’s new ReptiTherm Habitat Heater is designed for use with large, heavy reptiles such as tortoises, or in large “zoo” style enclosures with Monitors, Tegus, Iguanas, and other large lizards.

Conclusion

By our suggestions above, we hope that you can found snake heating pad with thermostat for you.Please don’t forget to share your experience by comment in this post. Thank you!