onceownedby 
Nowadays, there are so many products of rv water heater heating element for suburban model sw6de in the market and you are wondering to choose a best one. You have searched for rv water heater heating element for suburban model sw6de in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings rv water heater heating element for suburban model sw6de which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
Eleventree 2 Pack RV Water Heaters Magnesium Anode Rod, Extends the Life of Suburban and Mor-Flo Water Heaters Tank–3/4"NPT threads 9.25 length-2pack
- Corrosion Protection: Extends the life of a water heater by attracting corrosive elements in the water. The exclusive suburban anode rod absorbs the corrosive action acused by hot water and prolongs the life of your water heater tank.
- Size and Material Typle: Magnesium anode rod, 9.25″ long,¾” threads , Uses a 1-1/16’’ socket
- Reliable quality：High quality rv hot water tank anode rods are a perfect replacement for suburban 232767 and Mor-Flo 6 Gallon water heater anode rod.
- Pack of 2: Unscerw the anode rod to drain the tank. If the rod is mostly eaten away, replace with a new one. Always keep a spare in your RV.
- Fast delivery: Fulfillment by Amazon,Eleventree provide the best quality product at the best possible price.We provide the best quality product at the best possible price. guaranteed reply within 24 hours and a 30-day money-back guarantee our customer service is unmatched.
(2 Pack) Water Heater RV Anode Rod – Replacement Suburban 232767 Mor-Flo – 3/4" Thread with PTFE Thread Seal Teflon Tape
- 99.8% Pure High Quality Magnesium anode rod. Better than powered anode rod, camper rod and aluminum rod. Compatible with all models Suburban (D, DE, DEL, DEM models).
- For RV water heaters and camper water heater. Replacement Part Suburban 232767. Large Roll Of Teflon Pipe Thread Sealing Tape Included for you. Size: 9 ¼’’ Length and has ¾’’ NPT Thread. Uses a 1 1/16’’ (27mm) socket (not included)
- Replacing the anode rod in a water heater before it fails can slow down corrosion inside the tank and significantly extend the life of the water heater, sometimes even doubling it. You can get rid of the rotten egg smell with 3 simple steps.
- A magnesium water heater anode rod protects your tank better and last longer. Aluminum/zinc rods are cheaper and are recommended if you have smelly incoming water. But consult a water treatment specialist before switching to an aluminum rod.
- Anode rods should be replaced regularly 6 months to 1 year if you have bad incoming water, keep few spare in your RV just in case while you are camping.
Similar items with 4 stars and above
Suburban Manufacturing Suburban Co 5239A Water Heater Sw6De W/H 6 Gal Dsi/Elec
The best water heaters on the road today, Suburban’s line of water heaters includes high recovery gas, gas-electric and motor aid models with sizes and features to match the requirements of almost any RV. Heated water attacks all metals, but not porcelain. That’s why Suburban uses a porcelain-lined, steel water heater tank with an a node rod to “absorb” the electrolytical action – just like your water heater at home. In fact, when a Suburban porcelain-lined tank is properly maintained, tank life may double or triple its three-year limited warranty, saving owners the cost of premature replacement. In addition, every Suburban tank is pressure tested twice during the manufacturing process to ensure its integrity. Fast recovery means more hot water and fewer cool water cycles. Six gallon Suburban gas water heaters feature 12,000 BTUH input and a recovery rate of 10.2 gallons per hour – that’s the fastest in the industry.
Suburban 520900 120 Volt Electric Element
Product Description: Water Heater Element; Screw-In; 1440 Watt; 120 Volt; With Gasket
; Weight: 0.9500; Compatibility: SW12/16 DE/DEM; Wattage: 1440 Watts; Voltage Rating: 120 Volts; Mounting Type: Screw-In; With Gasket: Yes; Quantity: Single
Features
1,440 Watt Element Recovers An Additional 6.0 Gallons Per Hour At Campsites
Limited 90 Day Warranty
Facon 12" x 18" Holding Tank Heater Pad for RV Camper Trailer with Automatic Thermostat Control (Pack of 2)
- Heater pads are designed and engineered to protect RV holding tanks, pipes and steps from freezing. Winter convenience of Today’s RV’er. Provides water for RV Trailer mobile home in Winter.
- Pad Size: 12” x 18”, works efficiently up to 50 gallon holding tanks.
- Built in thermostat is set to turn itself on at 45°F( + – 5 degrees) and turn itself off at 68°F( + – 5 degrees). As long as the on/off switch is in the on position and electrical power is supplied, the thermostat will continuing cycle preventing freezing.
- Self adhesive make it easy installation, 3mm foam insulation pad, no extra facility required. Reticular carbon fiber design provide heated evenly & efficiently.
- 2-Wires Design without Plug- Convenience for fixed place installation. Includes Lead Wire for Power(Red wire) and Ground Wire(White wire)
Facon 12" x 18" RV Tank Heater Pad, Up to 50 Gallons Fresh Water/Grey Water/Black Water Holding Tank Heating Pad with Automatic Thermostat Control, 12V DC
- Heater Pads are Designed and Engineered to protect RV holding tanks, pipes and steps from freezing. Winter convenience of Today’s RV’er. Provides water for RV Camper Trailer Mobile home in winter
- Genesis Lighting own the Patent and Certificate for this Heater Pad Products, Patent No.: US10257888B2. We are the only manufacturer for this product. Our registered Brand is” Facon”
- Simply turn “ON” the power switch when the outside temperature is near to freezing. Built-in Thermostat is Set to Turn Itself on at 45°F( + – 5 degrees) and Turn Itself off at 68°F( + – 5 degrees). Turn “OFF” the switch when the outside temperature remains above freezing, fluids have been vacated, or Summer is coming, or RV is not in use
- Pad size 12” x 18” works efficiently up to 50 gallon holding tanks(Fresh Water Tanks, Grey Water Tanks and Black Water Tanks). 3mm Foam Insulation Pad with self adhesive make it easy installation, no extra facility required
- Passed US Standard QAI Quality Certification. 2-Wires Design without plug- Convenience for fixed place installation. Connect to 12V DC power supply and RV power switch. Red Wire=Positive(+)
- White Wire=Negative(-)
Suburban SW6DE RV Water Heater Camper Trailer DSI Elec/lp w/White Door
Suburban Water Heater SW6DE for RV Camper Trailer LP Gas and Electric Electric Ignition / DSI w/White Door 6 Gallon Quality you want … now and down the road. The best water heaters on the road today, Suburban’s line of water heaters includes high recovery gas, gas-electric and motor aid models with sizes and features to match the requirements of almost any RV. Faster Recovery Fast recovery means more hot water and fewer cool water cycles. Six-, 10-, 12- and 16-gallon Suburban gas water heaters feature 12,000 BTUH input and a recovery rate of 10.2 gallons per hour – that’s the fastest in the industry. Combination gas/electric models also use a 1,440-watt element to recover an additional 6.0 gallons per hour at campsites. For higher recovery, both the gas and electric element may be used simultaneously. Model: SW6DE LP Gas and Electric Electric Ignition 12,000 BTU Heat Gas and 1440 Watt Electric Recovery Rate of 10.2 GPH Gas and 6 GPH for Electric 34.3 lbs Empty Weight Cut Out Dimensions: 12.75″ Wide x 12.75″ High x 19 3/16″ Deep.**INCLUDES POLAR WHITE DOOR 6255APW**
New Suburban Sw6De 6 Gallon Dsi Electric Ignition/Lp Lp And Gas Rv Motorhome Trailer Water Heater
Suburban water heater sw6de for rv camper trailer lp gas and electric electric ignition / dsi / 6 gallon quality you want … Now and down the road. The best water heaters on the road today, suburban’s line of water heaters includes high recovery gas, gas-electric and motor aid models with sizes and features to match the requirements of almost any rv. Faster recovery fast recovery means more hot water and fewer cool water cycles. Six-, 10-, 12- and 16-gallon suburban gas water heaters feature 12,000 btuh input and a recovery rate of 10.2 Gallons per hour – that’s the fastest in the industry. Combination gas/electric models also use a 1,440-watt element to recover an additional 6.0 Gallons per hour at campsites. For higher recovery, both the gas and electric element may be used simultaneously. Model: sw6de lp gas and electric electric ignition 12,000 btu heat gas and 1440 watt electric recovery rate of 10.2 Gph gas and 6 gph for electric 34.3 Lbs empty weight cut out dimensions: 12.75″ Wide x 12.75″ High x 19 3/16″ deep.
Camco 02583 4500W 240V Screw-In Foldback Water Heater Element – Low Watt Density
Product Description
02583 Wattage: 4500 Features: -Screw-In Element.-Element comes with one gasket.-Carded.-8″ Minimum tank diameter.-150+ Watts per square inch. Specifications: -1500W Voltage: 120.-2000W Voltage: 240. Dimensions: -Dimensions: 14.5″H x 3.63″W x 1.75″ D.
From the Manufacturer
Camco’s 4500W 240V screw-in type low watt density water heater elements are better suited for areas with problem water (hard water, lime, etc.) Most LWD elements are a fold-back style and provide no loss of efficiency yet reduce lime deposit buildup. Screw-in type elements fit most models of American, AO Smith, Bradford White, Craftmaster (prior to 1991), GE, GS Wood (certain models), Kenmore, Lochinvar, Maytag, Mor-Flo, Reliance, Rheem, Richmond, Rudd, Sears, State, Whirlpool and all water heaters manufactured after 1994. The replacement element must be the same voltage and wattage as the element being replaced. Never exceed the nameplate rating on the water heater.
Camco 02342/02343 4500W 240V Screw-In Water Heater Element – High Watt Density
Product Description
4500W/240V Screw-In Element 02343
From the Manufacturer
Camco’s 4500W 240V screw-in type high watt density water heater elements can be used in all screw-in replacement situations if the same wattage and voltage are used. High Watt Density water heater elements are the most common and the same type of element provided with most new water heaters. They are easy to install and come with detailed instructions on how to replace your old element. Screw-in type elements fit most models of American, AO Smith, Bradford White, Craftmaster (prior to 1991), GE, GS Wood (certain models), Kenmore, Lochinvar, Maytag, Mor-Flo, Reliance, Rheem, Richmond, Rudd, Sears, State, Whirlpool and most water heaters manufactured after 1994. The replacement element must be the same voltage and wattage as the element being replaced. Never exceed the nameplate rating on the water heater.
Conclusion
By our suggestions above, we hope that you can found rv water heater heating element for suburban model sw6de for you.Please don’t forget to share your experience by comment in this post. Thank you!
