Which Is The Best Hot Water Heater On Demand Electric Tankless

Product Description

This Smart Technology electric tankless water heater is configured as a “whole home” model for climates where incoming water temperature is 67°F and above. This model is well suited for heating up to 2-Gallon per minute, which is the equivalent of one shower head (with a 1.5 gpm flow) and one sink with a low inlet water temperature of 67°F and an output setting of 105°F. Digital Temperature Control allows you to set your temperature in increments of 1 Degree. This model can also be used in colder climates as a Point of Use for a sink or other low flow application. All tankless water heaters are sized based on flow rate and temperature rise, and there is a direct relationship between the two. So if used in a cold area requiring a high temperature rise, it will be more limited in the amount of fixtures (gallons per minute) it can heat at one time compared to a warmer climate. When sized properly this water heater will provide endless hot water and only consume the energy needed, giving the user complete control. Prior to purchase and installation please verify this model is the right size for the expected demand and electrical requirements. The ECO 11 requires a minimum 125 amp electrical panel for installation with (1) 60 amp double pole breaker connected to (1) set of #6 awg wire. Plumbing connections are 1/2″ compression fitting with the option of 1/2″ NPT adapter included. For additional assistance please feel free to contact our support center at 877-474-6473.

NOTE : 11Kw at 220 is equal to 13kw at 240.

From the Manufacturer

This Smart Technology electric tankless water heater is configured for climates where incoming water temperature is 67 Degree F and above. This model is well suited for heating up to 2-Gallon per minute, which is the equivalent of one shower head (with a 1.5 gpm flow) and one sink with a low inlet water temperature of 67 Degree F. Digital Temperature Control allows you to set your temperature in increments of 1 Degree. This model can also be used in colder climates as a Point of Use for a sink or other low flow application. Prior to purchase and installation please verify this model is the rights size for your hot water needs and electrical requirements.

Get hot water where it’s needed, when it’s needed with the Bosch ES4 Tronic 3000 T Electric water heater. This 2.5-gallon capacity point-of-use mini-tank fits right under your sink and provides a practical and effective solution to your hot water needs. This smaller model can be plugged right into a 120-volt outlet with the 36-37″ cord, or can be installed in-line with a larger hot water source to provide “on-demand” use. The glass-lined tank offers great insulation and added durability, while the heater’s fast recovery rate eliminates long waits for hot water. An external dial allows you to easily control the temperature range, and the temperature-and-pressure relief valve enhances your safety. The ES4 Tronic 3000 T from Bosch has a sleek and attractive exterior design that blends in seamlessly with existing décor when installed in a visible location, making this heater a great option in any room.

Professional classic® tankless electric water heaters offer continuous hot water quick and on demand for single point-of-use or multiple applications

The Stiebel Eltron Tempra 24 Plus Tankless Water Heater features exclusive Advanced Flow Control™ German patented technology invented by Stiebel Eltron to automatically maintain water temperature for constant comfort. It’ll reduce flow slightly if hot water demand exceeds capacity to ensure that hot showers will never be interrupted. Tempra 24 Plus will typically use 15-20% less energy compared to conventional electric tank water heaters. Although, it’s possible to save significantly more energy depending on personal home usage habits. The difference is that conventional tank water heaters continually store hot water, and as a result, lose 15%-20% of the total energy consumed to the environment around them. This is called standby heat loss. Tank water heaters that use gas or oil are even less efficient, because they also lose heat through their vents to the outdoors. Our tankless water heaters do not need venting, and will not store hot water, waiting for you to use it. They operate on-demand to provide continuous and endless hot water when you need it, and not waste energy when you don’t. CERTIFICATIONS INCLUDE – ANSI/UL Std. 499, CSA Std. C22.2 No. 88, ISO 9001, WQA tested & certified against NSF/ANSI 372 for lead free compliance. TECHNICAL SPECIFICATIONS – Single Phase 50/60 Hz; Voltage: 240 V/208 V; Wattage: 24 KW/18 KW; Min. recommended household electric service 150 A; Amperage draw: 2 x 50 A 2 x 44 A; Number and min. recommended size of circuit breakers: 2 x 50 A (DP); Number of runs and min. recommended wire size (copper): 2 x 6/2 AWG; Max. temperature rises: 92 F/82 F at 1.50 GPM, 73 F/54 F at 2.25 GPM, 54 F/41 F at 3.00 GPM, 37 F/27 F at 4.50 GPM; Min. water flow to activate unit: 0.50 GPM/1.9l/min; Weight: 16.1 lb/7.3 kg; Nominal water volume: 0.26 gal/1l; Max. inlet water temperature: 131 F/55 C; Working pressure: 150 PSI/10 BAR; Tested to pressure: 300 PSI / 20 BAR; Water connections: 3/4″ NPT.

Professional classic® tankless electric water heaters offer continuous hot water quick and on demand for single point-of-use or multiple applications

Product Description

This electric tankless water heater is a true Point of Use Model because it is specifically designed for under the sink, single applications with a maximum flow rate of 0.5-Gallon per minute (gpm) and includes a 0.5 gpm sink aerator. This heater is flow controlled, meaning the temperature will adjust according to flow rate. It is the smallest sized Ecosmart electric tankless model and should not be used to run anything more than one sink at a time or used in areas where inlet water temperature is lower than 57°F. At this inlet temperature the ECO POU 3.5 can heat 0.5 gallons per minute to 105°F. Its compact size allows for under the sink installations. The Point of Use models are ideal for: Wet Bars, Strip Malls, Doctor’s Office, Boats, Recreational Vehicles (RVs), Bathroom Sinks. When sized properly this water heater will provide endless hot water. Prior to purchase and installation please verify this model is the right size for the expected demand and electrical requirements. The Eco POU 3.5 requires a minimum 100 amp electrical panel for installation with (1) 30 amp single pole breaker connected to #10 awg wire. Plumbing connections are 1/2″ NPT. For additional assistance please feel free to contact our support center at 877-474-6473. TROUBLE SHOOTING STEP: When the water is not hot enough, please slow down the flow of water to increase temperature!

From the Manufacturer

This electric tankless water heater is a true Point of Use Model because it is specifically designed for under the sink, single applications with a maximum flow rate of 0.5-Gallon per minute (gpm) and includes a 0.5 gpm sink aerator. Its compact size allows for under the sink installations. The Point of Use models are ideal for: Wet Bars, Strip Malls, Doctor’s Office, Boats, Recreational Vehicles (RVs), Bathroom Sinks. Prior to purchase and installation please verify this model is the rights size for your hot water needs and electrical requirements.

Conclusion

By our suggestions above, we hope that you can found hot water heater on demand electric tankless for you.Please don’t forget to share your experience by comment in this post. Thank you!