Which Is The Best Hot Water Heater 48 Gas Line

From the Manufacturer

Stiebel Eltron Tempra 15 Electric Tankless Whole House Water Heater, 240 V, 14.4 kW. Set the knob on the front cover and enjoy water temperatures between 86 Degree (30 Degree C) and 140 Degree (60 Degree C). Change the desired temperature at anytime. No purchase of a remote selector control is necessary. Advanced microprocessor technology ensures that the water temperature never deviates from the set point.

WiseWater Indoor Tankless Water Heater 6L – Propane Gas
Note: Install indoors only, do not install it in strong wind or airflow environment!!!

JSD12-6F-L model is the smallest unit in the WiseWater line-up. It is perfect for light residential (i.e. small apartment units) and radiant heating applications.

Can be converted into a direct-vent unit.
Indoor installation only.
Cost-efficient and environmental friendly.
Perfect for light residential and high altitude area
Low water pressure required for ignition (0.01MPa)
Flow rate: 1.6 GPM maximum.
Standard 1/2″” NPT water fittings.
No AC outlet needed.
Dimensions: 17.6″” H x 12″” W x 4.8″” D.
Weight: 10.8 lbs

Product Description

Thermwell SP57/11C Water Heater Blanket. Fits up to 60-gallon water heater. 3-Inch tall by 48-inch wide by 75-inch tall

From the Manufacturer

The Frost King SP57/11C Water heater Insultion Blanket is fibergalss and foil on both sides for supreme insulation and fits most gas, oil or electric water heaters. Includes foiltape for easy installation. The reflective value is rated at 10.

◆With compact and lightweight design, this gas water heater is the best solution for outdoor hot water. It perfect for camping, RV life or anywhere you need hot water.

◆Our 6L digital panel gas water heater delivers endless hot water with optimal energy efficiency! Energy-saving design heats up in seconds and uses gas only while water is flowing. The digital panel shows out coming water temp; Electric pulse ignition powered by 2 D-cell batteries (not included).

◆Notice

Only uses Liquefied Petroleum Gas (LPG).

Please read the instructions carefully before using the gas water heater and in strict accordance with the instructions to use and to maintain the water heaters.

Please check the gas connection regularly to ensure there are no leaking risks.

◆Feature

High efficient & energy saving

Automatic ignition system

Flame failure protection device

Anti-freezing protection function

Overheat protection

Fully adjustable heat and water flow

Low water pressure starts up and just need 2.5PSI of water pressure

Ignition: Powered by 2 sizes ‘D’ batteries (batteries not included)

The maximum temperature rise is 167℉(75℃) and the minimum temperature rise is 48.2℉（9℃）

◆Package includes

1 x LPG Gas water heater with handle 

1 x gas hose & regulator assembly 

1 x Shower Rose with 1.5m hose and ON/OFF switch 

1 x Teflon tape 

2 x Garden hoses 

3 x 1/2″+1 x 3/4″ washers 

1 x Fixing kits 

1 x English Instruction  User Manual 

The Eastman 048280 Gas Water Heater Installation Kit is a complete package which consists of 2 corrugated stainless steel flexible water heater connectors with corrosion resistance properties. It also includes a 24-inch gas connector which is made of sturdy corrugated stainless steel and has a yellow epoxy coating. It contains 2 compression adapters for a solder-free connection. The package consists of a roll of sealing Teflon tape which makes installation easy. This kit has a 1-year limited warranty. EASTMAN’s certified appliance connectors are a premium quality that provides a reliable installation every time. This water heater installation kit is used to install a new gas water heater or replace the existing connectors. Use this kit for reliable installation.

Product Description

High BTU gas connector for use with boilers, commercial water heaters, gas meters, gas packs/rooftop HVAC units, furnaces, and tankless water heaters

From the Manufacturer

This Dormont gas connector is CSA Design Certified domestically and internationally for indoor and outdoor use with natural, manufactured, mixed, liquefied petroleum, and LP-gas air mixtures Durable, naturally corrosion-resistant 304 stainless steel construction offers an exclusive no-neck design to increase flexibility Quality flared end fittings create a metal to metal seal to ensure integrity in critical applications Manufactured domestically in the USA, all Dormont gas connectors are 100 percent leak tested to ensure consistent quality you can trust.

Genuine Original Equipment Manufacturer (OEM) parts! This gas valve and temperature control assembly (part number 6911131) is for water heaters. Gas valve and temperature control assembly 6911131 supplies the burner with fuel to heat the water. The temperature control thermostat controls the gas valve. A service technician is recommended for this repair because the gas supply line connections must be checked for leaks after the repair. For American Water Heaters.

Product Description

Features ENERGY STAR Qualified Energy Factor of .82 for Natural Gas and Propane Certified for Installation in Manufactured (Mobile) Homes Leak detection shuts off water to unit to limit property damage Enhanced scale detection lessens possibility of serious, long-term damage to unit Temperature lock prevents accidental or unauthorized changes to water temperature Complies with South Coast Air Quality Management District 14 ng/J or 20 ppm NOx emission levels Rinnai Value Series Tankless Water Heater Product Warranty Dimensions Width: 14 Inches Height: 23 Inches Depth: 9 Inches Weight 45.6 Pounds Ignition Direct Electronic Hot Water Capacity 0.26 to 6.6 GPM Minimum Activation Rate 0.4 GPM Minimum/Maximum Gas Rate (Input BTUs ) 10,300 150,000 Energy Factor 0.82 for Natural Gas and Propane Energy Star Yes Approved Gas Types Natural Gas or Propane Temperature Settings 98F – 140F with MC-91-2US 98F – 160F with MCC-91-2US Type of Controller MC-91-2US (included) MCC-91-2US (optional for Hydronic Applications) MC-100V-1US Deluxe Controller (optional) BC-100V-1US Bathroom Controller (optional) Ultra Lox NOx Yes Electrical AC 120 Volts, 60 Hz Electrical Consumption Normal: 76 Watts Standby: 2 Watts Anti-Frost Protection: 120 Watts Service Connections Gas Supply: 3/4 Inch MNPT Cold Water Inlet: 3/4 Inch MNPT Hot Water Outlet: 3/4 Inch MNPT. Turn off gas supply and 120 V power supply

From the Manufacturer

Features ENERGY STAR Qualified Energy Factor of .82 for Natural Gas and Propane Certified for Installation in Manufactured (Mobile) Homes Leak detection shuts off water to unit to limit property damage Enhanced scale detection lessens possibility of serious, long-term damage to unit Temperature lock prevents accidental or unauthorized changes to water temperature Complies with South Coast Air Quality Management District 14 ng/J or 20 ppm NOx emission levels Rinnai Value Series Tankless Water Heater Product Warranty Dimensions Width: 14 Inches Height: 23 Inches Depth: 9 Inches Weight 45.6 Pounds Ignition Direct Electronic Hot Water Capacity 0.26 to 6.6 GPM Minimum Activation Rate 0.4 GPM Minimum/Maximum Gas Rate (Input BTUs ) 10,300 150,000 Energy Factor 0.82 for Natural Gas and Propane Energy Star Yes Approved Gas Types Natural Gas or Propane Temperature Settings 98F – 140F with MC-91-2US 98F – 160F with MCC-91-2US Type of Controller MC-91-2US (included) MCC-91-2US (optional for Hydronic Applications) MC-100V-1US Deluxe Controller (optional) BC-100V-1US Bathroom Controller (optional) Ultra Lox NOx Yes Electrical AC 120 Volts, 60 Hz Electrical Consumption Normal: 76 Watts Standby: 2 Watts Anti-Frost Protection: 120 Watts Service Connections Gas Supply: 3/4 Inch MNPT Cold Water Inlet: 3/4 Inch MNPT Hot Water Outlet: 3/4 Inch MNPT

The Eccotemp 45HI-NG Indoor Natural Gas Tankless Water Heater (NEW 2017 Model) is the largest indoor model of the Eccotemp tankless line. Rated at an impressive 6.8 GPM and 150,000 BTU per hour, the 45HI-NG can meet all the hot-water needs of a standard home or apartment with one or two bathrooms, as well as smaller commercial applications. The compact, wall mounted 45HI-NG is powered by natural gas. With its fully automated control system, the Eccotemp 45HI-NG is the ideal choice for any standard sized home.

Product Features:
CSA certified for US and Canadian use
Hot water capacity range: .8 – 6.8 GPM
45-degree rise: 6.8 GPM
50-degree rise: 5.0 GPM
70-degree rise: 3.4 GPM
Activation Flow .8 GPM
Natural Gas Powered
Digital display with simple controls and diagnostics
Energy Factor: 0.80
Energy rating: 82%
Maximum / Minimum gas rate: 19,800 – 150,000 BTUs
3/4” Water Inlet & Outlet
3/4” Gas Inlet
4” Venting

Eccotemp 45HI-NG Dimensions:
Height 28″
Width 15″
Depth 7.5″
Weight approx. 38 lbs.
Shipping weight 39.7 lbs.
What’s included:

110 volt UL listed power cord
10-year warranty on heat exchanger
5-year warranty on parts
T&P Relief Valve
Gas Shut Off Valve
IMPORTANT NOTE: Not recommended for elevation above 3,000 ft. and cannot be used for HYDRONIC SYTEM, RECIRCULATING, or FLOOR HEATING.

CSA 2714806

Class 2901 85

Class 2901 05

Class 2902 93

Class 2902 13

Flextron 18 Inch Flexible Epoxy High BTU Gas Line Connector features 1 Inch Outer Diameter & 3/4 Inch Female Iron Pipe (FIP) x 3/4 Inch Male Iron Pipe (MIP) Fittings. This gas connector is from YC34 series of connectors and is made of Yellow Coated Stainless Steel. Comes with certified design, Stamp of approval, full-length corrugations, strength, and flexibility, flared end adaptors. This connector also features a proprietary polymer coating designed to withstand prolonged exposure to harsh household cleaning, plumbing repair, and masonry products as well as UV rays and salt. FLEXSHIELD Epoxy coating provides extra corrosion protection from accidental contact with common household chemicals and consistent coverage provides protection along the entire length of the connector. The design has been tested on strength and it can withstand an internal hydrostatic pressure of 250 psi or 17 mpa without bursting or showing signs of leaks. It can also endure up to 30 bends without leaks in water at a depth of maximum 2 inches and withstands 15 twists of 90 degrees, without showing signs of corrosion. The connector can handle external temperatures of 800 Fahrenheit. Designed and engineered for safe, optimal flow rate.

Specifications:

Conclusion

By our suggestions above, we hope that you can found hot water heater 48 gas line for you.Please don’t forget to share your experience by comment in this post. Thank you!