The 6 Best Evga Rtx 2080 Ti With Liquid Cooling

The EK-Vector Strix RTX 2080 Ti RGB water block is specially designed for the ROG Strix version of NVIDIA® GeForce® RTX 2080 Ti graphics cards.

The water block covers the entire PCB length, and directly cools the GPU, VRAM and the VRM. The redesigned cooling engine has a larger footprint compared to the previous generation for better cooling performance

The EK® Vector Series water blocks use an Open Split-Flow cooling engine design. It is characterized by low hydraulic flow restriction, which means that it can be used with weaker water pumps, or pumps running on low-speed settings and still achieve top performance. The jet plate and fin structure geometry have been optimized to provide even flow distribution with minimal losses and optimal performances even when used with reversed flow. 

The base of the block is CNC machined out of nickel-plated electrolytic copper while the top is CNC machined out of high-quality acrylic material. Sealing is ensured by high-quality EPDM O-rings.

The block is equipped with 4 12V RGB LED strips which are compatible with the motherboard 4-pin 12V RGB LED header. This product is compatible with popular RGB sync technologies from all major motherboard manufacturers.

Both the NVIDIA® and ROG NVLink™ are compatible with this water block. 

ENCLOSED:

• EK-Vector Strix series high-performance water block
• Mounting mechanism with screw-in brass standoffs
• Necessary mounting screws, nuts, and washers
• 2x Nickel plated brass plug G1/4”
• 6mm Allen key
• Thermal pads
• Thermal grease EK-TIM Ectotherm (1g)

PLEASE NOTE:

ROG Strix RTX 2080Ti factory backplate is not compatible with this water block
Fittings are just for showcase and are not included
Should not be installed with any aluminum EKWB Fluid Gaming parts

Model: 3831109814123

Powered by GeForce RTX 2080 Ti NVIDIA Turing architecture & real time Ray tracing water force all-in-one cooling system 240mm radiator with 2x 120mm RGB fans metal back plate with RGB a or us logo illumination 4 years warranty (online registration required) intuitive controls with a or us engine Core Clock 1770 MHz 11GB 352-bit GDDR6 3 x HDMI, 3 x DisplayPort, 1 x USB Type-C PCI Express 3.0 x16.

The EK-Vector FTW3 RTX 2080 Ti RGB high-performance water block is specially designed for EVGA FTW version of NVIDIA® GeForce® RTX 2080 Ti graphics cards. The water block features a unique aesthetic cover over the block Terminal which is designed to showcase the graphics card model via LEDs, visible from the side.

The water block directly cools the GPU, VRAM and the VRM, and uses an Open Split-Flow cooling engine design which proved to be a superior solution for GPU water blocks. It is characterized by low hydraulic flow restriction, which means that it can be used with pumps running at slower speeds. The jet plate and fin structure has been optimized to provide even flow distribution with minimal losses and optimal performances even when used in reversed flow.

The base of the block is CNC machined out of nickel-plated copper while the top is CNC machined out of acrylic. Sealing is ensured by EPDM O-rings.

It features four integrated LED sources, two located in the terminal cover and one LED strip on each end of the water block which is compatible with the motherboard 4-pin 12V RGB LED header. This product is compatible with popular RGB sync technologies from all major motherboard manufacturers.

G1/4″” threaded fittings can be used on both sides of the terminal and for multiple GPU connectivity, please refer to our offer of Scalar GPU Terminals.

Both the NVIDIA® and EVGA NVLink™ are compatible with this water block.

Enclosed:

– EK-Vector FTW3 series high-performance water block
– Necessary mounting hardware
– 2x Nickel plated brass plug G1/4”
– 6mm Allen key
– Thermal pads
– Thermal grease

PLEASE NOTE:
EVGA FTW3® RTX 2080Ti factory backplate is not compatible with this water block. This product should NOT be installed with any aluminum Fluid Gaming parts!

Model: 3831109816783

The EK-Vector Trio RTX 2080 RGB – Nickel + Plexi high-performance water block is specially designed for MSI Gaming X Trio version of NVIDIA® GeForce® RTX 2080 graphics cards. 

The water block directly cools the GPU, VRAM and the VRM. These newly developed water blocks feature a redesigned cooling engine that has a larger footprint compared to the previous generation of EK® Full Cover water blocks. 

The EK® Vector Series water blocks use an Open Split-Flow cooling engine design which proved to be a superior solution for GPU water blocks. It is characterized by low hydraulic flow restriction, which means that it can be used with weaker water pumps, or pumps running on low-speed settings. The jet plate and fin structure geometry have been optimized to provide even flow distribution with minimal losses and optimal performances even when used in reversed flow.

The base of the block is CNC machined out of nickel-plated electrolytic copper while the top is CNC machined out of acrylic material. Sealing is ensured by EPDM O-rings. The block is equipped with three 12V RGB LED strips which are compatible with the motherboard 4-pin 12V RGB LED header. 

Both the NVIDIA® and ROG NVLink™ are compatible with this water block.

Enclosed:

– EK-Vector Trio series high-performance water block
– Necessary mounting hardware
– 2x Nickel plated brass plugs
– Thermal pads / grease EK-TIM Ectotherm (1g)

PLEASE NOTE:

• MSI Gaming X Trio 2080 Ti factory backplate is not compatible with this water block
• This product should NOT be installed with any aluminum Fluid Gaming parts
• TO PREVENT DAMAGE, YOUR COOLANT MUST CONTAIN ANTICORROSIVES AND BIOCIDES

Model: 3831109814659

Features:
1. Block with 0.5mm micro channel injection design, all designed only for performance!
2. Block using large flow design, even if low raise pump can use it.
3. Block made by high purity copper, and electroplating to prevent oxidation and makes beautiful.
4. Inlet and outlet can change direction free.
Tips:
1. Please double check the graphics card detail model to ensure compatibility. Please feel free to contact us if you are not very sure.
2.2pcs G1/4 3/8″ ID 1/2″ OD Silver Compression Fittings are included, instead of the ones in the pictures.
3. Prohibit the use of alcohol containing coolant.
4. Graphics card block installation requires a certain skill and experience, because the graphics card manufacturing tolerances may have a certain impact on the block installation, we can assist buyers to solve such problems, but this can not be the basis of returns.
Compatibilities:Gigabyte RTX 2070 Winforce 2X 8G
Compatibilities:Gigabyte RTX 2060 Super Gaming OC 3X 8G
Compatibilities:Gigabyte RTX 2060 Super Winforce OC 8G
Compatibilities:Gigabyte RTX 2060 Super Winforce 8G

Conclusion

By our suggestions above, we hope that you can found evga rtx 2080 ti with liquid cooling for you.Please don’t forget to share your experience by comment in this post. Thank you!