onceownedby 
Nowadays, there are so many products of marine water hose for engine cooling in the market and you are wondering to choose a best one. You have searched for marine water hose for engine cooling in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings marine water hose for engine cooling which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
aokur DC 12V 5L Transfer Pump Extractor Oil Fluid Diesel Scavenge Suction Vacuum with Siphon Hose and Cigarette Light 60W
- Pump Diameter: Approx. 4.8cm/1.89 inch
- Outlet PVC pipe Length:2.8m
- Nylon pipe Length:1.5m
- Maximum Pressure: Max. 0.8MPA，Maximum Flow: 5L/min, Rated Power: 60W, Rated Voltage: DC 12V
- Application: Widely used in general industrial equipment, medical equipment, chemical equipment, shipbuilding, drinks, carpet and floor cleaning, water purification and water treatment equipment, vehicle cleaning, agricultural spraying, zo pipeline pressure, air cleaning cooling, coal and metallurgical industries
- Please use when the engine is warm,the engine oil is warm and viscosity is lower,this will be easier and faster to pump
- Note: If you want to connect the pump to AC power, you need to have a power converter.
Specification:
Rated Voltage: DC 12V
Rated Power: 60W
Maximum Flow: 5L/min
Maximum Pressure: 0.8MPA
Pump Diameter: Approx. 4.8cm / 1.89inch
Length: Approx. 14.5cm / 5.7inch
Outlet PVC pipe Length:2.8m
Nylon pipe Length:1.5m
Brass pipe Length:0.7m
Package include:
1x Oil Pump
1x 11mm Outlet PVC pipe
1x 6mm Nylon pipe
1x 5mm Brass pipe
How to use:
1.Start to run the car engine for a while, when oil temperature turns to be about 50 degrees, start pumping oil.
2.Then connect the cugarette light and pump to the power, run it for a while, and observe whether the inlet and outlet is normal.
3.Next,open the filler cap,get dipstick out, force the tube into the bottom of the joint, until the tube does not move; then put the inlet pipe from the oil dipstick into in end (the tube into the bottom of the tank, the bottom concave place, in order to pump the oil completely); as no oil or pumping up very slowly or intermittently, it is generally caused by loose pipes and fittings. You have to install the pipes and fittings again.
4.After oil pumping, remove the tube, and then run the pump for a while, pump the remaining oil inside the pumping clean, or pump water for a while until the pump head gets clean If you have not used it for a long time, it may have no suction, then just pour the water in the pump, and run the pump for a few minutes until the air is all out.
Note: If you want to connect this pump to AC power, you will need a power converter.
Slippery Pete Fluid Pump for Quart Bottles – Transfer Gear Oil, Transmission and Differential Fluid with This 5cc Hand Pump (1)
- ????100% INSPECTED AND PACKAGED IN THE USA
- ????Fits securely on standard quart containers, which is about a 1″ opening (Will not fit Red Line quart containers or wide mouth quart containers, BUT Slippery Pete’s FLUID PUMP FOR GALLON BOTTLES WILL FIT Castrol Edge wide mouth quart containers!!)
- ????16” long flexible tube for pumping fluids into tight and awkward places. Rigid suction tube that reaches to bottom of STANDARD QUART CONTAINERS
- ????100% MONEY BACK GUARANTEE!
- ???? Easy to understand instructions on back of header card
Slippery Pete recently had to change the transmission fluid on his weekend convertible using synthetic ATF. His ride just hit 30,000 miles and he likes to take good care of his baby.
The handy FLUID QUART PUMP screwed on the bottle with no problem. The pump worked great. He didn’t have to worry about using a funnel and spilling fluid every where. He just aimed the flexible clear tube into the transmission and pumped away.
The best part is that he could easily control the amount of fluid being pumped and not worry about over filling.
All Slippery Pete products are INSPECTED AND PACKAGED IN THE USA!!!
Conclusion
By our suggestions above, we hope that you can found marine water hose for engine cooling for you.Please don’t forget to share your experience by comment in this post. Thank you!
