onceownedby 
Nowadays, there are so many products of heating element for electric hot water heater in the market and you are wondering to choose a best one. You have searched for heating element for electric hot water heater in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings heating element for electric hot water heater which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
Rheem SP20060 Electric Water Heater Tune-Up Kit
Product description
Rheem SP20060 Electric Water Heater Tune-Up KitRheem SP20060 Electric Water Heater Tune-Up Kit Features: Repair Kit Plumber’s Pack
From the Manufacturer
Repair your water heater rather than replace it with the Rheem PROTECH Electric Water Heater Tune-Up Kit. This OEM quality Electric Water Heater Tune-Up Kit provides a quick and easy way to repair the most common items on an electric water heater. The tune up kit helps prolong the life of your water heater by renewing the key electrical components of your water heater. The kit includes two 4,500-watt, 240-volt water heater High Watt Density 1” screw-in elements with gaskets, one Therm-O-Disk 240-volt lower thermostats and one Therm-O-Disc upper thermostat. This kit is for units that have 1” screw in water heater elements. They will not fit Rheem Marathon or Eclipse water heaters.
Rheem SP10869MM Screw-In 240-volt by 4500-watt Element, Premium Resistored Stainless Steel
- Element – 240V/4500W stainless steel resistored lwd – 1 in screw-in
- Watt density classification: lwd, input Voltage (V): 208, Input voltage (V): 240, wattage at 208V (W): 3380
- Element diameter (in.): .316, Element length – Flange to tip (in.): 13.44, mounting Type: threaded, ACTUAL thread size – Outside diameter.): 1-9/32
- Thread type series designation: NPSM, configuration: fold back, nominal thread size – (in.): 1, threads per inch: 11-1/2
Product Description
Rheem SP10869MM water heater 1 inch 4500W element resistored screw-in LWD 240V stainless steel
From the Manufacturer
Rheem is a leading provider of gas furnaces, heat pumps, air conditioners, air handlers, indoor air quality products, gas and electric water heaters.
Commercial Electric Water Immersion Heating Element Brass (5000 Watt)
5000 Watt. 1 Phase. 208V Buffet table, steam table immersion heating element. Front View A =10″
Diximus 10in 1000W-110V Water Heater Portable Electric Immersion Element Boiler Travel
- Portable immersion bucket water heater is simple electric appliance for heating liquids.
- Total length: 10″, Metal sheel length: 7.3″, Metal sheel Diameter: 0.256″
- AC: 110 V, Power 1000 W, 4.9 ft Cable
- New and High Quality water immersion heater, Very Compact heating coil. Heating up water to the right temperature or boil egg, potato, etc.
- Portable electric immersion water heater is Ideal for home, garden, office or travel.
1000W 110V Portable Electric Immersion Water Heater
Portable immersion bucket water heater is simple electric appliance for heating liquids.
Use this lightweight and portable immersion heater for warming liquids (water, coffee, tea, soup and more). Ideal for home, office and travel.
Unlike the electric kettle it has not a vessel for the liquid and needs to be dip in liquid. A tube of portable immersion bucket water heater is used as the heating element in this water boiler.
Portable immersion bucket Water Heater is simple in design and very compact, making it widely distributed.
Specification:
- Product name: immersion water heater
- Voltage: AC 110V
- Power: 1000W
- Material: 201 stainless steel
- Total length: 10″ ((25.4cm)
- Tube length: 7.3″ (18.5cm)
- Outer Diameter: 0.256″ (Ф6.5mm)
- Wire length: , 4.9 ft (1.5m)
Reliance Water Heater 100109136 Electric Water Heater Plumber Repair Pack, Includes 1 Each Upper Thermostat.
Rheem SP10869PH Screw-In 240-volt by 5500-watt Element, Premium Resistored Stainless Steel
- For best results, use only Rheem replacement parts for repairing your Rheem Water Heater
- Watt Density Classification: MWD, Input Voltage (V): 208, Input Voltage (V): 240, Wattage at 208V (W): 4130
- Watt Density at 208V (W/sq. in.): 85, Wattage at 240V (W): 5500, Watt Density at 240V (W/sq. in. ): 113, Cold Resistance (ohms): 10.50
- Element Diameter (in.): .316, Element Length – Flange to Tip (in.): 13.47, Mounting Type: Threaded, Actual Thread Size – Outside Diameter(in.): 1-9/32
- Thread Type Series Designation: NPSM, Configuration: Fold back, Nominal Thread Size – (in.): 1, Threads per Inch: 11-1/2
Product Description
Rheem is a leading provider of gas furnaces, heat pumps, air conditioners, air handlers, indoor air quality products, gas and electric water heaters.
From the Manufacturer
Rheem is a leading provider of gas furnaces, heat pumps, air conditioners, air handlers, indoor air quality products, gas and electric water heaters.
Bosch Electric Mini-Tank Water Heater Tronic 3000 T 4-Gallon (ES4)- Eliminate Time for Hot Water – Shelf, Wall or Floor Mounted
- CONVENIENT HOT WATER HEATER: 4 gallon point-of-use mini-tank fits under your sink to provide hot water right where you need it. Thermal efficiency is 98%. Dimensions : 13.75 W x 13.75 H x 13.5 D Inches
- LONG LASTING QUALITY: This electric water heater is easy to maintain and has premium glass-lined material for a long service life. (Amps 12A, Volts (VAC) 120)
- INDEPENDENT INSTALLATION: 36-37″ cord plugs into a 120 volt outlet for independent installation or in-line with a large hot water source
- FAST RECOVERY RATE: Eliminates long waits for hot water at your sink, get on demand hot water at your every need (supplies up to 2 sinks at a time)
- EASILY MOUNTED: Can be shelf, wall or floor mounted (bracket included)
- simply tap into the cold water line and install the water heater directly at the sink to provide hot water
Get hot water where it’s needed, when it’s needed with the Bosch ES4 Tronic 3000 T Electric water heater. This 4-gallon capacity point-of-use mini-tank fits right under your sink and provides a practical and effective solution to your hot water needs. This smaller model can be plugged right into a 120-volt outlet with the 36-37″ cord, or can be installed in-line with a larger hot water source to provide “on-demand” use. The glass-lined tank offers great insulation and added durability, while the heater’s fast recovery rate eliminates long waits for hot water. An external dial allows you to easily control the temperature range, and the temperature-and-pressure relief valve enhances your safety. The ES4 Tronic 3000 T from Bosch has a sleek and attractive exterior design that blends in seamlessly with existing décor when installed in a visible location, making this heater a great option in any room. Water Heater measures 13.75″ H x 13.75″ L x 13.5″ D and weighs 17.3 lbs. Do not operate this water heater if it is has a damaged cord or plug, if it is not working properly, or if it has been damaged or dropped
GESAIL 1500W Electric Immersion Heater, UL-Listed Bucket Water Heater with Guard, Submersible Heater with Thermostat and Auto Shutoff Protection, Perfect for Home Travel and Winter Job
- High Power: 1500W, 120V immersion water heater, heat 5 gallons of water in few minutes, depending on the volume of the water, the original water temperature and container. It will heat water continuously over 180 degrees F and towards boiling(It can’t boil water).
- Thermostat Feature – The middle stainless steel tube contains a thermal overload safety switch, when water reaches a certain temperature(about 180-194 degrees F), it can automatically cycle on and off to maintain water temperature. It will not overheating and save power.
- Guard – The stainless-steel guard on the electric bucket heater protects the heating element from directly contacting persons or animals. The holes on the guard help release heat into the water faster.
- Simple Operation – Immerse in water at proper level, plug into any grounded wall outlet, and then power on.
- Safety and Widely Usage: UL-Listed, this bucket heater is safe for use in all pails, buckets and bathtubs, perfect for home, travel and winter time job.
GESAIL UL-Listed Bucket Water Heater – Widely Application
Use for construction industry, animal husbandry, car washing, indoor use and many other jobs in cold weather. Also can be used to heat small swimming pool. Make sure your wire and plug can withstand the load of (multiple) heater(s), otherwise it may cause overheating or burn off. Especially for continuous long time use.
Safe for a Variety of Containers
This immersion heater is safe to use in a variety of containers and tubs, including plastic or metal pails, buckets, just make sure your container can contain boiling water.
Specification:
Condition: 100% Brand New
Material: Stainless Steel + Plastic
Item Weight: 0.9KG
Color: Silver & Black
Voltage: 120 Volts
Power: 1500W
Cord Length:1.8M/5.9 FT
Size: 44.5*8.8*8.8CM
Package Included:
1 x bucket water heater
Notice:
1. Make sure the water always covers the stainless-steel guard. The cord and handle(the black part) are not designed to submerge in water.
2.This immersion water heater can’t be used in hot tubs.
Warning:
Please don’t use extension cord.
Never leave it unattended.
If the black plastic handle is too hot, please unplug it, wait until cool before using,otherwise a fire hazard will result.
Eastman 45058 Heavy-Duty Steel Water Heater Element Wrench
- MATERIAL: This water heater element wrench is made of high-quality, heavy-duty steel which provides strength and endurance
- DURABLE: The sturdy steel of this element wrench is chrome plated which provides extra durability making it last longer
- COMPATIBILITY: This water heater element wrench is universal which fits most standard screw-in elements
- CONTENT: This package includes 3/4 inch to 1/2 inch drive adapter
- EASE: This wrench makes replacement and installation of screw-in water heater elements quickly without hassle
Product Description
The Eastman 45058 Water Heater Element Wrench is made of high-impact heavy-duty steel which gives strength. The steel has a chrome finish which gives a modern look to the heater element socket also providing durability making it extremely long-lasting. The kit also includes 3/4 inch to 1/2 inch drive adapter.
USE :This water heater element socket is a must for every household as it lets you replace and install screw-in water heater elements quickly and easily without any hassle. It can be fitted on almost all standard screw-in elements. A modern design with efficient quality.
From the Manufacturer
Eastman’s Heavy-Duty Water Heater Element Wrench helps remove and replace residential screw-in water heater elements quickly and easily. Made of chrome plated steel for durability and strength. Includes a 3/4″ to 1/2″ drive adapter.
Conclusion
By our suggestions above, we hope that you can found heating element for electric hot water heater for you.Please don’t forget to share your experience by comment in this post. Thank you!
