onceownedby 
Nowadays, there are so many products of power attic cooling ventilator roof mount in the market and you are wondering to choose a best one. You have searched for power attic cooling ventilator roof mount in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings power attic cooling ventilator roof mount which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
Cool Attic CX1500UPS Power Gable Ventilator Fan
- VENTILATOR FAN: This is a 1300 CFM Power Attic Gable Mount Ventilator with a 2.6 Amp thermally protected motor, a galvanized steel flange, and an automatic thermostat
- GABLE MOUNT FAN: It mounts easily in the gable of your home, behind existing louvers or any other gable louvers of your choice. It will provide ventilation without modifying your roofline, or where roof-mounting is impractical. It mounts easily in gable behind louvers
- ATTIC FAN: The Cool Attic Gable-Mount Attic Ventilator Fan offers effective power attic ventilation to reduce heat buildup, equalize temperatures inside and outside the attic. It has 14-inch fan with 600-square-inch intake. It is galvanized steel construction
- EASY INSTALLATION: It cools attic up to 1,850 square feet and 3.4-amp, 115-volt, 60-Hz thermally protected motor, 1,300 CFM rating at 0.03 static pressure when used with model No. CX2121 automatic shutter. It helps keep your home cooler and reduce utility costs
- HOME ROOF COOLING FAN: This fan helps prevent weather-induced home deterioration and make living areas more comfortable – all while helping reduce the operating cost of air conditioning. Easy to install with no holes in roof
Rand Solar Powered Attic Fan-8 Watt-W Roof Top Ventilator NEW!!
- Always runs on free solar power. If the Sun is shining on the solar panel, the fan will be spinning.
- Drastically cuts your cooling bill. Pays for itself in a VERY short time, good for the environment.
- Ventilates up to 700 square feet of attic space with its 435 CFM capacity. For installations with larger space or higher heat load, you can install more fans or use one of our larger 30W or 40W rooftop fans.
- High Efficiency long life brushless motor starts up even in lower light and overcast conditions. If you are looking for a fan that will run at night, check out our 10W and 30W fans with battery backup.
- No wiring to perform. Unit is self-contained. Just mount it to the roof and it works automatically. If you are looking for a fan that will allow you to adust the solar panel angle, check out our larger 30W and 40W rooftop fans.
NEW Rand 8 Watt Solar Attic Fan With this high quality attic fan, you will dramatically cut your cooling costs in the summer. Your attic can get hotter than 160 degrees in the summer. This heat works its way into your house, and makes it more difficult to cool it in the summer. With this attic fan, you can cool your attic temperatures by up to 50 degrees. In the spring and fall, you may not need air conditioning at all! In the summer, it will dramatically decrease the amount of time that your air conditioning needs to run. And, since it is all powered by the sun, you will get these benefits at no cost to you! It also provides needed ventilation to decrease moisture and water vapor in your attic. This, combined with the decreased attic temperature, can increase the longevity of your entire roof system.
This compact fan is great for small spaces. Or, for larger spaces you can add more fans to get the job done. This fan is great for sheds, greenhouses, campers, boats, covered patios, dog houses, chicken coops, etc.
The features of this Rand Solar Attic Fan are as follows:
High quality and high efficiency Polycrystaline Silicon Solar Panel.
Heavy-duty High Impact ABS plastic housing is impervious to corrosion, for an extra long life. It’s designed to withstand heat, wind, hail, and UV Light.
Cools up to 700 square feet of attic space with its 435 CFM capacity.
High Efficiency long life brushless motor starts in lower light and overcast conditions. Whisper quiet operation.
Easy roof-top installation.
Approximate overall dimensions are: 17″ L X 17″ W X 4.75″ H
Approximate dimensions of just the ventilator that sits above the roof line are: 13.5″L X 13.5″W X 4.75″H
Hole diameter that needs to be cut for installation is approximately 11″.
Fan blade diameter is 9″.
Includes 20 year parts warranty.
ECO-WORTHY 25W Solar Powered Attic Ventilator Gable Roof Vent Fan with 30W Foldable Solar Panel
- Solar powered gable attic fan with high efficiency brushless motor keeps you a quiet environment.
- 30 watt poly foldable solar panel with adjustable angle mount & 16 feet cable, you can adjust the optimal angle to get the best efficiency.
- The fan can work automatically at low voltage, so you also get great ventilation even in cloudy days.
- Solar vent cools your roof and also reduces the load on your air conditioning system, it will cut your cooling costs dramatically.
- Package Included: 1pc 25W Solar Gable Attic Vent & 1pc 30W Poly Foldable Solar Panel with 16 feet Cable & 1 set Mounting Brackets
Cool Attic CX3000EEAM roof-Vents
Product Description
1400 CFM (cubic feet per minute) superior energy efficient roof mount attic exhaust ventilator. Galvanized steel construction. Suitable for 2000 sq ft (square foot) attic. 2.1A (ampere) energy efficient thermally protected PSC (Permanent Split Capacitor) motor with built-in automatic cut-off. Includes 10A adjustable thermostat. Precision balanced aluminum fan blades for minimum vibration. 6-point suspensions (anchor points) for stability and high wind resistance. This fan requires minimum 600 sq in (square inch) net free area intake vent area. Suitable for up to 8/12 roof pitch. Includes galvanized steel mesh grill to protect against insects, birds, and rodents yet allows adequate air intake. Easy installation with no special tools required. Lifetime limited warranty on all parts.
From the Manufacturer
The low profile dome attic power vents are made of galvanized steel. They have galvanized steel mesh grills to protect against insects, birds, and rodents, yet allow adequate air intake. The fan blades are precision balanced for minimum vibration. They are factory assembled for easy installation (no specific tools required) and are built for stability and high wind resistance. It comes with a 1400 CFM 2.1 Amp energy efficient PSC motor and is made for a 2000 square foot attic.
Cool Attic CX1000AMWGUPS Power Roof Galvanized Steel Vent Dome with 3.4 Amp Motor, Weathered Grey,
The low profile dome attic power vents are made of galvanized steel. They have galvanized steel mesh grills to protect against insects, birds, and rodents, yet allow adequate air intake. The fan blades are precision balanced for minimum vibration. They are factory assembled for easy installation (no specific tools required) and are built for stability and high wind resistance. It comes with a 1080 cfm 3.4 amp motor and is made for a 1600 square foot attic.
Amtrak Solar Powerful 40-Watt Galvanized Steel New Upgraded 14 inch Solar Attic Fan Quietly Cools and Ventilates Your House, Garage or RV and Protects Against Moisture Build-up.
- New 14 inch Fan Housing with 10″ High Efficiency fan blade. enough to open louver. Easy to install with quick-connect wires.
- For Gabel vent, greenhouse, garage or RV. Includes 15’ of extra wire and brackets.
- Thermal protected fan motor with high efficiency fan blades. For areas up to 2250 Sq. Ft.
- 40 watt Solar Panel. Free optional thermostat upon request.
- Made in USA.
Similar items with 4 stars and above
Cool Attic CX1000AMUPS Power Attic Roof Mount Ventilator with 3.4 Amp 60 Hz Motor and Steel Flange, Galvanized Steel Dome
This Cool Attic is a 1080 cfm power attic roof mount ventilator with 3.4 amp motor and steel flange. It comes with a galvanized steel dome with a mill finish. It has an adjustable automatic THERMOSTAT. It Works best for attics up to 1,600 square feet. It prolongs the life of composite roof shingles with lower summer attic temperatures. Ventamatic has provided the ventilation industry with an air of excellence for over 60 years. The factory is 100% powered by wind generated power, 95% of all waste products are recycled and the packaging is recycled cardboard.
Cool Attic CX3000EEAMBR Power Attic Roof Mount Ventilator with 2.1-Amp PSC Motor Flange, Brown Galvanized Steel Dome
Product Description
1400 CFM (cubic feet per minute) superior energy efficient roof mount attic exhaust ventilator. Galvanized steel construction. Suitable for 2000 sq feet (square foot) attic. 2.1A (ampere) energy efficient thermally protected PSC (Permanent Split Capacitor) motor with built-in automatic cut-off. Includes 10A adjustable thermostat. Precision balanced aluminum fan blades for minimum vibration. 6-point suspensions (anchor points) for stability and high wind resistance. This fan requires minimum 600 sq in (square inch) net free area intake vent area. Suitable for up to 8/12 roof pitch. Includes galvanized steel mesh grill to protect against insects, birds, and rodents yet allows adequate air intake. Easy installation with no special tools required. Lifetime limited warranty on all parts.
From the Manufacturer
This Cool Attic has a 1400 CFM Power Attic Roof Mount Ventilator with Energy Efficient 2.1 amp PSC Motor and steel Flange. It comes with a brown galvanized steel dome. It has an adjustable automatic thermostat. It works best for attics up to 2,000 square feet. It prolongs the life of composite roof shingles with lower summer attic temperatures. Exhaust fans require a minimum of 600 sq-in of net intake airflow [Net Free Area] in order to function safely and correctly. Ventamatic has provided the ventilation industry with an air of excellence for over 60 years. The factory is 100% powered by wind generated power, 95% of all waste products are recycled and the packaging is recycled cardboard.
MaxxAir Professional Grade Gable Mount Power Attic Ventilator with 2.6-Amp 60-Hz Motor and 14-Inch Blade
- VENTILATOR FAN: This is a 1300 CFM Power Attic Gable Mount Ventilator with a 2.6 Amp thermally protected motor, a galvanized steel flange, and an automatic thermostat.
- GABLE MOUNT ATTIC FAN: It mounts easily in the gable of your home, behind existing louvers or any other gable louvers of your choice. It will provide ventilation without modifying your roofline, or where roof-mounting is impractical.
- ATTIC FAN: The Cool Attic Gable-Mount Attic Ventilator Fan offers effective power attic ventilation to reduce heat buildup, equalize temperatures inside and outside the attic. It has 14-inch fan with 600-square-inch intake. It is galvanized steel construction.
- EASY INSTALLATION: It cools attic up to 1,850 square feet with a 2.6-amp, 115-volt, 60-Hz thermally protected motor, 1,300 CFM rating at 0.03 static pressure when used with model No. CX2121 automatic shutter. It helps keep your home cooler and reduce utility costs.
- HOME ROOF COOLING FAN: This fan helps prevent weather-induced home deterioration and make living areas more comfortable – all while helping reduce the operating cost of air conditioning. Easy to install with no holes in roof required.
The Cool Attic standard-duty Attic Exhaust Ventilator offers effective power attic ventilation to reduce heat buildup, equalize temperatures inside and outside the attic, help prevent weather-induced home deterioration, and make living areas more comfortable – all while helping reduce the operating cost of air conditioning. Easy to install with no holes in roof. Suitable for 1850 sq. ft. attic. Includes 10 Amp adjustable thermostat Requires minimum 600 sq. in. net free air intake vent area. Easy installation behind static gable louvers sold separately. Excellent attic fan / attic gable fan / gable attic fan for all of your needs.
Cool Attic CX1500UPS CX1500 roof-Vents, 1500 (Renewed)
- VENTILATOR FAN: This is a 1300 CFM Power Attic Gable Mount Ventilator with a 2.6 Amp thermally protected motor, a galvanized steel flange, and an automatic thermostat
- GABLE MOUNT FAN: It mounts easily in the gable of your home, behind existing louvers or any other gable louvers of your choice. It will provide ventilation without modifying your roofline, or where roof-mounting is impractical. It mounts easily in gable behind louvers
- ATTIC FAN: The Cool Attic Gable-Mount Attic Ventilator Fan offers effective power attic ventilation to reduce heat buildup, equalize temperatures inside and outside the attic. It has 14-inch fan with 600-square-inch intake. It is galvanized steel construction
- EASY INSTALLATION: It cools attic up to 1,850 square feet and 3.4-amp, 115-volt, 60-Hz thermally protected motor, 1,300 CFM rating at 0.03 static pressure when used with model No. CX2121 automatic shutter. It helps keep your home cooler and reduce utility costs
- HOME ROOF COOLING FAN: This fan helps prevent weather-induced home deterioration and make living areas more comfortable – all while helping reduce the operating cost of air conditioning. Easy to install with no holes in roof
Similar items with 4 stars and above
Conclusion
By our suggestions above, we hope that you can found power attic cooling ventilator roof mount for you.Please don’t forget to share your experience by comment in this post. Thank you!
