One Ninja replacement blade assembly (7-fin as pictured) for Nutri Ninja Blender. Fits NUTRI NINJA r BL487 BL487QPL BL488W BL490 BL491 BL492 BL492W BL640 BL641 BL642 BL642W BL642Z BL680 BL680A BL682 BL450-30, BL451-30, BL454-30 & BL456-30.

KIND REMINDER BEFORE PURCHASE:
1: Your original motor base must be 7 fins. The Nutra Ninja Replacement Blade can’t fit all the 7 fins blender’s motor base: there are too many models of ninja blender blade, if the last two digitals(not part of model #) or any character is difference, please don’t purchase it

2: Your blender model must be identical with our stated model.”ONLY COMPATABLE WITH” 7 fins model Auto iQ BL2012, BL2013, BL480, BL480D, BL481, BL482-30, BL486CO, BL487, BL487A, BL488W, BL490, BL491, BL492, BL492W, BL640, BL641, BL642, BL642W, BL642Z, BL680A, BL682, NN100, NN100A, NN101, NN102, BL2012.

NOT FIT FOR BL660, BL663, BL740, BL770, BL771,BL773CO, BL780, BL780,BL820,BL830,BL450,BL451-70,BL454-70,BL482-70. Please check your model carefully before purchasing.

TIPS FOR USAGE
1. You are recommended to replace your ninja blender every 6 months or as needed for optimal performance
2. Please check whether the gear of the bottom loosen or tighten before use. If it’s loosen, please tighten it
3. Please check the rubber gasket and be sure it is put snugly into the bottom blade. (The rubber gasket is used to avoiding leakage）
4. Do not overfill! To avoid spilling, do not add ingredients past the “Max” fill line
5. Place the replacement blade onto the cup and screw it tightly until you have a good seal
6. Please make sure it in right place and locked tightly
7. Do not run your blender over 4 minutes at a time to prevent overheating of the blender

Specification:
Condition: 100% Brand New
Material: Rubber
Color: White
Fit for: Ninja Bullet Juicer
Diameter: Approx. 10 cm / 3.94 inch
Weight: Approx. 40g

Package Included:
1 x Pack of 4Pcs Sealing O-ring(Not Included Mixed Blade)

Note:
This gasket is replacement part, not the original.
Please allow slight deviation for the color and measurement. Thanks for your understanding.

WHYCHOOSE Anbige?

High quality: Anbige are manufactured to meet or to exceed the original manufacturer standards

Variety of kits: we offer a wide range of replacement for blenders

Return policy: your satisfaction is our first priority, if you are not happy with an item, you can return it in accordance with Amazon Return policyThis product is designed and manufacturedby Anbige. Any use of other brand names ormodel designation is made solely for the purposes of demonstratingcompatibility.

Specification:
Brand: BTNTVEN
Condition: 100% Brand New and never used
Package Includes:
1 x 7 Fins Blender Blade Assembly, 1 x Extra Gasket Rubber.

Fits The Following Nutri Ninja Blender Models :
For Nutri Ninja BlendMax DUO with Auto-iQ Boost (BL2012, BL2013)
For Nutri Ninja Auto-iQ (BL480, BL480D, BL481, BL482)
For Nutri Ninja Auto-iQ Complete Extraction System (BL486CO)
For Nutri Ninja Auto-iQ Pro Complete (BL487, BL487A, BL488W)
For Nutri Ninja Auto-iQ Blender (BL490)
For Nutri Ninja Auto-iQ System (BL491, BL492)
For Nutri Ninja Auto-iQ Compact System (BL492W)
For Nutri Ninja Ninja Blender DUO with Auto-iQ (BL640, BL641, BL642, BL642W, BL642Z)
For Nutri Ninja Blender System with Auto-iQ (BL680, BL680A, BL682)
For Ninja Intelli-Sense Blender Duo (CT640C, CT641)
For Ninja Intelli-Sense Kitchen System (CT680, CT680A, CT680SS, CT680W)
For Ninja Intelli-Sense Kitchen System with Auto-Spiralizer (CT682SP)
For Nutri Ninja Nutri Bowl DUO with Auto-iQ Boost (NN100, NN100A, NN101, NN102)

If you have any problem about your order, please feel free to contact us.

Fits for 1000W Nutri Ninja 6 Fin and 7 Fin Blenders
✔【Fits for 1000W 7 Fins Blender Blade】:BL2012,BL2013,BL480,BL480D,BL481,BL482, BL486CO,BL487,BL487A,BL488W,BL490,BL491,BL492,BL492W,BL640,BL641,BL642,BL642W,BL642Z,BL680A,BL682,NN100A,NN101,NN10
✔【Fits for 1000W 6 Fins Blender Blade】:BL480-70,BL481-70,BL482-70, BL483-70, BL484-70 Package included: 4 x Rubber Gasket For blade
Diameter:10cm/3.94inch;Please check if it is suitable for your Ninja Blender before you buy it.
Material:Rubber material

One Ninja replacement blade assembly (7-fin as pictured) for Nutri Ninja Blender.

Fits NUTRI NINJA r BL487 BL487QPL BL488W BL490 BL491 BL492 BL492W BL640 BL641 BL642 BL642W BL642Z BL680 BL680A BL682 BL450-30, BL451-30, BL454-30 & BL456-30.

BEFORE PURCHASING please check your existing blade for the following:

1: Your original motor base must be 7 fins. The Nutra Ninja Replacement Blade can’t fit all the 7 fins blender’s motor base: there are too many models of ninja blender blade, if the last two digitals(not part of model #) or any character is difference, please don’t purchase it

2: Your blender model must be identical with our stated model.”ONLY COMPATABLE WITH” 7 fins model Auto iQ BL2012, BL2013, BL480, BL480D, BL481, BL482-30, BL486CO, BL487, BL487A, BL488W, BL490, BL491, BL492, BL492W, BL640, BL641, BL642, BL642W, BL642Z, BL680A, BL682, NN100, NN100A, NN101, NN102, BL2012.

NOT FIT FOR BL660, BL663, BL740, BL770, BL771,BL773CO, BL780, BL780,BL820,BL830,BL450,BL451-70,BL454-70,BL482-70. Please check your model carefully before purchasing.

Pay attention to before use:

1. You are recommended to replace your ninja blender every 6 months or as needed for optimal performance

2. Please check whether the gear of the bottom loosen or tighten before use. If it’s loosen, please tighten it

3. Please check the rubber gasket and be sure it is put snugly into the bottom blade. (The rubber gasket is used to avoiding leakage）

4. Do not overfill! To avoid spilling, do not add ingredients past the “Max” fill line

5. Place the replacement blade onto the cup and screw it tightly until you have a good seal

6. Please make sure it in right place and locked tightly

7. Do not run your blender over 4 minutes at a time to prevent overheating of the blender

This listing is only for 6-fin Ninja BL770 BL771 BL773 BL780 Blender

Our Promise to Readers

We keep receiving tons of questions of readers who are going to buy Ninja Blender Rubber Gasket Bl681a, eg:

• What are Top 10 Ninja Blender Rubber Gasket Bl681a for 2020, for 2019, for 2018 or even 2017 (old models)?
• What is Top 10 Ninja Blender Rubber Gasket Bl681a to buy?
• What are Top Rated Ninja Blender Rubber Gasket Bl681a to buy on the market?
• or even What is Top 10 affordable (best budget, best cheap or even best expensive!!!) Ninja Blender Rubber Gasket Bl681a?…
• All of these above questions make you crazy whenever coming up with them. We know your feelings because we used to be in this weird situation when searching for Ninja Blender Rubber Gasket Bl681a.
• Before deciding to buy any Ninja Blender Rubber Gasket Bl681a, make sure you research and read carefully the buying guide somewhere else from trusted sources. We will not repeat it here to save your time.
• You will know how you should choose Ninja Blender Rubber Gasket Bl681a and What you should consider when buying the Ninja Blender Rubber Gasket Bl681a and Where to Buy or Purchase the Ninja Blender Rubber Gasket Bl681a. Just consider our rankings above as a suggestion. The final choice is yours.
• That’s why we use Big Data and AI to solve the issue. We use our own invented, special algorithms to generate lists of Top 10 brands and give them our own Scores to rank them from 1st to 10th.
• You could see the top 10 Ninja Blender Rubber Gasket Bl681a of 2020 above. The lists of best products are updated regularly, so you can be sure that the information provided is up-to-date.
• You may read more about us to know what we have achieved so far. Don’t hesitate to contact us if something’s wrong or mislead information about Ninja Blender Rubber Gasket Bl681a.

Specification:
Condition: 100% Brand New
Material: Rubber
Color: White
Fit for: Ninja Bullet Juicer
Diameter: Approx. 10 cm / 3.94 inch
Weight: Approx. 40g

Package Included:
1 x Pack of 4Pcs Sealing O-ring(Not Included Mixed Blade)

Note:
This gasket is replacement part, not the original.
Please allow slight deviation for the color and measurement. Thanks for your understanding.

Note:
This gasket is replacement part, not the original.

Specification:
Material: Rubber
Color: White
Fit for: Ninja Bullet Juicer
Diameter: 10 cm/ 3.94 inch
Weight: 40g

Package Included:
4 Pcs O-Ring Sealing Gasket

Note:
This gasket is replacement part, not the original.

Specification:
Material: Rubber
Color: White
Fit for: Ninja Bullet Juicer
Diameter: 8.3 cm/ 2.27inch
Weight: 20g

Package Included:
4 Pcs O-Ring Sealing Gasket

Note:

This gasket is replacement part, not the origina,Please measure the size in advance, if you are not satisfied, you can return or refund at any time.l.

Fits for 7 Fins Blender Blade:BL487 BL487QPL BL488W BL490 BL491 BL492 BL492W BL640 BL641 BL642 BL642W BL642Z BL680 BL680A BL682 BL451-30, BL454-30 & BL456-30

Fits for 6 Fins Blender Blade:Auto iQ BL771 BL772 BL773CO and BL780
Specification:

Material: Rubber

Color: White

Fit for: Ninja Bullet Juicer

Diameter: 10 cm/ 3.94 inch
Thickness :0.3 cm/0.11inch
Weight: 40g
Package Included:

4 Pcs O-Ring Sealing Gasket

This listing is only for 6-fin Ninja BL770 BL771 BL773 BL780 Blender

All the mentioned brand is just for demonstrating the compatibility, not as trademark.

Usage method:
It is easy to install and clean, the gasket is in o-ring shape, just put in the lid, embed into it, with durable rubber material, not easy to be deformed.

Feature:
You can get a new lid with nice leakproofness, do not worry the juicy in blender will be poured out, can protect the blender, also you do not need to buy a new blender, which saves your money.

Specifications:
Quantity: 6 pieces
Color: white
Material: rubber
Size: 10 cm/ 3.94 inch in length, 1 cm/ 0.4 inch in height

Package includes:
6 x Gasket replacement

Warm note:
Please check the size before you buy it.

This listing is only for 6-fin Ninja BL770 BL771 BL773 BL780 Blender

This is an Oster accessory to be used with blenders. This Is only an accessory. Fits Models 0041, 4090, 4094, 4096, 4122, 4123, 4125, 4126, 4127, 4128, 4134, 4242, 4648, 6010 and many more.

O-Gasket Rubber 3-Pack O-Ring Gasket Seal for Osterizer and Oster Models

Our Promise to Readers

We keep receiving tons of questions of readers who are going to buy ninja blender rubber gasket bl681a, eg:

• What are Top 10 ninja blender rubber gasket bl681a for 2020, for 2019, for 2018 or even 2017 (old models)?
• What is Top 10 ninja blender rubber gasket bl681a to buy?
• What are Top Rated ninja blender rubber gasket bl681a to buy on the market?
• or even What is Top 10 affordable (best budget, best cheap or even best expensive!!!) ninja blender rubber gasket bl681a?…
• All of these above questions make you crazy whenever coming up with them. We know your feelings because we used to be in this weird situation when searching for ninja blender rubber gasket bl681a.
• Before deciding to buy any ninja blender rubber gasket bl681a, make sure you research and read carefully the buying guide somewhere else from trusted sources. We will not repeat it here to save your time.
• You will know how you should choose ninja blender rubber gasket bl681a and What you should consider when buying the ninja blender rubber gasket bl681a and Where to Buy or Purchase the ninja blender rubber gasket bl681a. Just consider our rankings above as a suggestion. The final choice is yours.
• That’s why we use Big Data and AI to solve the issue. We use our own invented, special algorithms to generate lists of Top 10 brands and give them our own Scores to rank them from 1st to 10th.
• You could see the top 10 ninja blender rubber gasket bl681a of 2020 above. The lists of best products are updated regularly, so you can be sure that the information provided is up-to-date.
• You may read more about us to know what we have achieved so far. Don’t hesitate to contact us if something’s wrong or mislead information about ninja blender rubber gasket bl681a.

Conclusion

By our suggestions above, we hope that you can found ninja blender rubber gasket bl681a for you.Please don’t forget to share your experience by comment in this post. Thank you!