Best 3M Cbrn Mask

The M40A1 Field Protective Gas Mask has been in use by the military of the United States since 1992 to protect from field concentrations of chemical and biological agents, along with radiological fallout particles. It still remains in U.S. Military service today.

Product Description

3M Full Facepiece Reusable Respirator 6700/54145, Respiratory Protection, Small (Pack of 1)
CARE INSTRUCTIONS

1. Remove cartridges and filters.
2. Clean facepiece (excluding filters and cartridges) by immersing in warm cleaning solution, water temperature not to exceed 120º F (49º C), and scrub with soft brush until clean. Add neutral detergent if necessary. Do not use cleaners containing lanolin or other oils.
3. Disinfect facepiece by soaking in a solution of quaternary ammonia disinfectant or sodium hypochlorite (1 oz [30 ML] household bleach in 2 gallons [7.5 L] of water), or other disinfectant.
4. Rinse in fresh, warm water and air dry in noncontaminated atmosphere.
5. Respirator components must be inspected prior to each use. A respirator with any damaged or deteriorated components must be repaired or discarded.
6. The cleaned respirator should be stored away from contaminated areas when not in use.

WARNING
Do not clean with solvents. Cleaning with solvents may degrade some respirator components and reduce respirator effectiveness. Inspect all respirator components before each use to ensure good operating condition. Failure to do so may result in sickness or death.

From the Manufacturer

3M&#8482 Full Facepiece Reusable Respirator 6000 Series helps provide protection against certain airborne contaminants while still allowing for a wide field of view and wearer comfort. The large lens provides a panoramic field of view, allowing the worker to see better. An improved field of view can help increase both safety and productivity. All sizes of this lightweight facepiece weigh 2 pounds or less, which enhances comfort and promotes better worker compliance in wearing respiratory protection. This versatile respiratory protection facepiece works with numerous 3M particulate filters, gas/vapor cartridges and supplied air respirator systems, allowing for specialized use with multiple applications (filters, cartridges and supplied air systems sold separately).

 

Wide field of view – cartridge shown sold separately view larger

Curved lens offers peripheral viewing view larger

Rear view showing comfortable silicone faceseal view larger

Cool and comfortable breathing
This reusable respirator comes with a 3M Cool Flow&#8482 valve. This proprietary valve is designed to release hot, humid exhaled breath quickly, helping to prevent unpleasant build-up of heat inside the facepiece. Respirators with Cool Flow valves are ideal for long periods of wear, especially where conditions are hot, humid, or physically demanding.

 

A versatile respirator for many applications and industries
Recommended applications include assembly, chemical clean-up, chemical handling, chemical splash, chipping, chiseling, cleaning, furnace operations, grinding, laboratories, machining, masonry, painting, pouring/casting, sanding, sawing, and welding. Industries in which this facepiece are commonly used include agriculture, construction, general manufacturing, pharmaceuticals, and primary metals.

 

Meets industry recognized government standards
NIOSH, a Federal government regulatory agency, has tested and approved the 6000 Series with 3M cartridges, filters or supplied air systems to help reduce inhalation of certain airborne contaminants. The 6000 Series facepiece also meets the impact requirements of the ANSI Z87.1-2003 standard, high impact level for face and eye protection.

 

Protects the health of workers
Breathing hazardous particles, gases and vapors can be harmful to your health. The 3M Full Facepiece Reusable Respirator 6000 Series helps reduce exposure to many contaminants. Enhanced comfort and visibility features make wearing the respirator noticeably more enjoyable to wear.

 

About 3M Company
For more than a century, 3M has applied innovation and technology to improving our customers’ lives and supporting their business goals. Today the company, from its headquarters in St. Paul, Minnesota, serves industrial and commercial customers and consumers in nearly 200 countries. Occupational Health and Environmental Safety products, focused on worker safety, include respirators, hearing-protection products, air-monitoring devices, environmental-safety products, and comprehensive training programs. The 3M brand, across thousands of products, represents consistency, superior quality, and value.

Cartridges Compatible with 3M Full Facepiece Reusable Respirator 6000 Series
	Multi Gas Vapor Cartridge/Filter P100	Organic Vapor/Acid Gas Cartridge/Filter P100	Acid Gas Cartridge/Filter P100	Acid Gas Cartridge	Ammonia Methylamine Organic Vapor Cartridge/Filter P100	Formaldehyde Organic Vapor Cartridge/Filter P100	Mercury Vapor Chlorine Gas Cartridge/Filter P100	Mercury Organic Vapor or Acid Gas Cartridge
Part Number	60926	60928	60922	6002	60924	60925	60929	6009
NIOSH Color Code	Magenta Olive	Magenta Yellow	Magenta White	White	Magenta Green	Magenta Black Olive	Magenta Orange	Orange
NIOSH Approved for:
Chlorine
Hydrogen Chlorine
Sulfur Dioxide
Chlorine Dioxide
Hydrogen Sulfide
Particulates
Ammonia
Methylamine
Formaldehyde
Certain Organic Vapors
Hydrogen Fluoride
Mercury Vapor

3M cartridge/filter 60923, organic vapor/acid gas/P100 when properly fitted on 3M half & full face pieces 6000 series and 3M half & full face pieces 7000 series with bayonet style cartridge holders, helps provide respiratory protection from certain organic vapors, chlorine, hydrogen chloride, sulfur dioxide, or hydrogen sulfide or hydrogen fluoride & particulates at concentrations up to 10 times the permissible exposure limit (PEL) with half face pieces or 50 times PEL with full face pieces.

The M40A1 Field Protective Gas Mask has been in use by the military of the United States since 1992 to protect from field concentrations of chemical and biological agents, along with radiological fallout particles. It still remains in U.S. Military service today.

This lightweight mask features P100 protection and is remarkably comfortable. Low-profile design provides visibility and undisturbed wearing of glasses. Adjustable latex straps for custom fit. Reusable face piece and filters. Durable and easy to clean. Complete with two P100 filters. WARNING: This product can expose you to chemicals which is [are] known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

The 3M Mold Remediation Respirator Kit 69097 includes one large sized 3M Full Face piece Reusable Respirator 6900 plus 2 pair (4 total) 3M Particulate Filters 2097. The 3M Particulate Filter 2097, P100, helps provide respiratory protection against exposure to mold, lead, asbestos, cadmium, arsenic, and MDA (methylenedianiline). This filter helps protect against a wide range of oil and non-oil based particulate contaminants. The filter also offers nuisance level odor relief from organic vapors that are below the PEL. The 3M Full Face piece Reusable Respirator 6000 Series is a lightweight, well-balanced, full face respirator design with silicone face seal for enhanced comfort and durability. The 3M Cool Flow Valve helps make breathing easier. NIOSH, a Federal government regulatory agency, has tested and approved the 3M Full Face piece Reusable Respirator 6000 Series with 3M cartridges, filters or PAPR and supplied air systems to help reduce breathing certain airborne contaminants. The 3M Full Face piece Reusable Respirator 6000 Series face piece also meets the impact requirements of the ANSI Z87. 1-2010 standard, high impact level for face and eye protection. Warning: Respirators help protect against certain airborne contaminants. Before use, the wearer must read and understand the User Instructions provided as a part of the product packaging. Follow all local regulations. In the U. S. , a written respiratory protection program must be implemented meeting all the requirements of OSHA 29 CFR 1910. 134 including training, fit testing and medical evaluation. In Canada, CSA standards Z94. 4 requirements must be met and/or requirements of the applicable jurisdiction, as appropriate. Misuse may result in sickness or death. For correct use, consult supervisor and User Instructions, or call 3M Personal Safety Division (PSD) Technical Service in the U. S. A. at 1-800-243-4630. In Canada, call 1-800-267-4414. Disclaimer: 3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e. g. , for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e. g. , U. S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and limitations. Misuse of 3M industrial and occupational products may result in injury, sickness, or death. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.

3M TEKK Protection Organic Vapor Replacement Cartridges, used by professionals for sanding and scraping of lead-based paint in certain projects, are NIOSH approved and provide at least 99.7% filter efficiency against solid and liquid particles that contain oil. Easy to use with 3M TEKK Protection 6000 Series Respirators, 3M TEKK Protection Organic Vapor Replacement Cartridges are great choice in respiratory protection for the pro when working on certain lead-based paint projects.

Product Description

NIOSH approved against certain organic vapors, acid gases and particulates. Use with 3M Half and Full Facepieces 6000, 7000 and FF-400 Series with bayonet filter holders.

The 3M™ Multi Gas/Vapor Cartridge/Filter 60926 P100 may be used for respiratory protection from certain organic vapors, chlorine, hydrogen chloride, sulfur dioxide, chlorine dioxide, hydrogen sulfide, ammonia, methylamine, formaldehyde, or hydrogen fluoride, and non oil and oil particulate concentrations up to 10 times the Permissible Exposure Limit (PEL) with half facepieces or 50 times PEL with quantitatively fit tested full facepiece masks. This cartridge/filter is not for use in environments that are immediately dangerous to life or health (IDLH). Recommended applications for the cartridge/filter include petrochemical and chemical processing. Inventory needs and training requirements for safety equipment are reduced because this respirator cartridge selection works for many different applications. This cartridge/filter is commonly used in the following industries: utilities, pharmaceuticals, mining, and primary metals.

This multi gas/vapor cartridge/filter combination works with 3M™ Half and Full Facepieces 6000, 7000 and FF 400 Series with bayonet attachment holders. The cartridge/filter is NIOSH (National Institute for Occupational Safety and Health) approved for environments containing certain organic vapors, acid gases, ammonia, methylamine, formaldehyde and non oil and oil particulates. The cartridge/filter has been assigned the color code “Magenta/ Olive” in the NIOSH system.

Breathing organic vapors, acid gases, ammonia, methylamine, formaldehyde and particulates can pose a risk to your health. NIOSH, a Federal government regulatory agency, has tested and approved the 3M™ Multi Gas Vapor Cartridge 60926 to help reduce exposure to certain organic vapors, acid gases, ammonia, methylamine, formaldehyde and particulates

From the Manufacturer

The 3M™ Multi Gas/Vapor Cartridge/Filter 60926 P100 may be used for respiratory protection from certain organic vapors, chlorine, hydrogen chloride, sulfur dioxide, chlorine dioxide, hydrogen sulfide, ammonia, methylamine, formaldehyde, or hydrogen fluoride, and non-oil and oil particulate concentrations up to 10 times the Permissible Exposure Limit (PEL) with half facepieces or 50 times PEL with quantitatively fit tested full facepiece masks. This cartridge/filter is not for use in environments that are immediately dangerous to life or health (IDLH). Recommended applications for the cartridge/filter include petrochemical and chemical processing. Inventory needs and training requirements for safety equipment are reduced because this respirator cartridge selection works for many different applications. This cartridge/filter is commonly used in the following industries: utilities, pharmaceuticals, mining, and primary metals.

This multi gas/vapor cartridge/filter combination works with 3M™ Half and Full Facepieces 6000, 7000 and FF-400 Series with bayonet attachment holders. The cartridge/filter is NIOSH (National Institute for Occupational Safety and Health) approved for environments containing certain organic vapors, acid gases, ammonia, methylamine, formaldehyde and non-oil and oil particulates. The cartridge/filter has been assigned the color code “Magenta/ Olive” in the NIOSH system.

Breathing organic vapors, acid gases, ammonia, methylamine, formaldehyde and particulates can pose a risk to your health. NIOSH, a Federal government regulatory agency, has tested and approved the 3M™ Multi Gas Vapor Cartridge 60926 to help reduce exposure to certain organic vapors, acid gases, ammonia, methylamine, formaldehyde and particulates.

For more than a century, 3M has applied innovation and technology to improving our customers’ lives and supporting their business goals. Today the company, from its headquarters in St. Paul, Minnesota, serves industrial and commercial customers and consumers in nearly 200 countries. Personal Safety products, focused on worker safety, include respirators, hearing protection, air and noise-monitoring devices, eyewear, hard hats, welding shields, coveralls, fall protection, reflective material, and comprehensive training programs. The 3M brand, across thousands of products, represents consistency, superior quality, and value.

3M Cartridge/Filter 60926, Multi Gas/Vapor/P100 when properly fitted on 3M Half and Full Facepieces 6000 Series and 3M Half and Full Facepieces 7000 Series with bayonet style cartridge holders, helps provide respiratory protection from certain organic vapors and particulates, chlorine, hydrogen chloride, sulfur dioxide, chlorine dioxide, hydrogen sulfide, ammonia, methylamine, formaldehyde or hydrogen fluoride at concentrations up to 10 times the Permissible Exposure Limit (PEL) with half facepieces or 50 times PEL with full facepieces.

Old stock that was issued but not used. Size medium. No filters, bag or second skin included. Just the basic gas mask. See my photos for what you will receive.

Our Promise to Readers

We keep receiving tons of questions of readers who are going to buy 3m cbrn mask, eg:

• What are Top 10 3m cbrn mask for 2020, for 2019, for 2018 or even 2017 (old models)?
• What is Top 10 3m cbrn mask to buy?
• What are Top Rated 3m cbrn mask to buy on the market?
• or even What is Top 10 affordable (best budget, best cheap or even best expensive!!!) 3m cbrn mask?…
• All of these above questions make you crazy whenever coming up with them. We know your feelings because we used to be in this weird situation when searching for 3m cbrn mask.
• Before deciding to buy any 3m cbrn mask, make sure you research and read carefully the buying guide somewhere else from trusted sources. We will not repeat it here to save your time.
• You will know how you should choose 3m cbrn mask and What you should consider when buying the 3m cbrn mask and Where to Buy or Purchase the 3m cbrn mask. Just consider our rankings above as a suggestion. The final choice is yours.
• That’s why we use Big Data and AI to solve the issue. We use our own invented, special algorithms to generate lists of Top 10 brands and give them our own Scores to rank them from 1st to 10th.
• You could see the top 10 3m cbrn mask of 2020 above. The lists of best products are updated regularly, so you can be sure that the information provided is up-to-date.
• You may read more about us to know what we have achieved so far. Don’t hesitate to contact us if something’s wrong or mislead information about 3m cbrn mask.

Conclusion

By our suggestions above, we hope that you can found 3m cbrn mask for you.Please don’t forget to share your experience by comment in this post. Thank you!