onceownedby 
Nowadays, there are so many products of nutri ninja pro bl450 replacement blade in the market and you are wondering to choose a best one. You have searched for nutri ninja pro bl450 replacement blade in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings nutri ninja pro bl450 replacement blade which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
20,820 Reviews Scanned
LOUFIMIDON Replacement Bottom Blade 6 Fins, Blender 6 Fins Blade Assembly, Only for Nutri Ninja Pro BL450-70 BL451-70 BL454-70 BL455-70
- ★ Ninja Blade Replacement 6 Fins – 3.94″/10cm diameter, effortlessly Pulverizes Fruits, Vegetables, Superfoods and Protein Shakes into a Delicious, Smooth Texture.
- ★ COMPATIBILITY – 6 fins ONLY Nutri Ninja Pro BL450-70 BL451-70 BL454-70 BL455-70
- ★ MATERIAL – Made of Food Grade BPA Free Plastic and Stainless Steel.
- ★ NOTE – The replacement rubber gasket in bottom blade maybe loosened during transportation. Before using the bottom blade, please check the rubber gasket and be sure it is put snugly into the bottom blade. Also please sure your blader uses 6 fins.
- ★ CAREFUL – Be careful of the sharp blade when open your package. Please TAKE OFF the PRE-INSTALLED GASKET in the bottom blade before using the replacement gasket.
LOUFIMIDON Replacement Bottom Blade 6 Fins
6 Fins replacement bottom blade effortlessly pulverizes fruits, vegetables, superfoods and protein shakes into a delicious, smooth texture. ONLY fit for 6 fins Nutri Ninja Pro BL450-70 BL451-70 BL454-70 BL455-70.
NOTES :
1. Please check whether the gear of the bottom loosen or tighten before use. If it’s loosen, please tighten it
2. Please check the rubber gasket and be sure it is put snugly into the bottom blade. (The rubber gasket is used to avoiding a leak)
3. Do not overfill! To avoid spilling, do not add ingredients past the Max fill line
4. Place the replacement blade onto the cup and screw it tightly until you have a good seal
5. Please make sure it in right place and locked tightly
6. Do not run your blender over 4 minutes at a time to prevent overheating of the blender
Packing including:
1 x 6 Fins Ninja Blender Replacement Blade
1 x Replacement Gasket Rubber
Replacement Nutri Ninja 6-Fin Extractor Blade FITS Nutri Ninja Blender Auto iQ BL450-70 BL451-70 BL454-70 BL455-70 BL482-70 Only fit for 18 oz 24 oz.32 oz
- NUTRI NINJA 6 FIN Blade for Nutri Ninja Blender FITS ONLY THIS MODELS 900W BL450-70, BL451-70, BL454-70, BL455-70 1000W BL480-70, BL480W-70, BL481-70, BL482-70, BL483-70,BL484-70
- DOES NOT FIT THIS MODELS BL450-30, BL451-30, BL454-30, BL455-30 1000W BL480-30, BL480W-30, BL481-30, BL482-30, BL483-30,BL484-30
- DOES NOT FIT 16oz CUPS bl770,bl771.
- Ninja Blade Replacement 6 Fins – 3.94″/10cm diameter, effortlessly Pulverizes Fruits, Vegetables, Superfoods and Protein Shakes into a Delicious, Smooth Texture.
- NOTE – The replacement rubber gasket in bottom blade maybe loosened during transportation. Before using the bottom blade, please check the rubber gasket and be sure it is put snugly into the bottom blade. Also please sure your blader uses 6 fins.
NUTRI NINJA 6 FIN BLADES WORKS FOR THIS BLENDERS ONLY Nutri Ninja Pro Blender 900w BL450-70, BL451-70, BL454-70, BL455-70 and 1000w Auto-iQ BL480-70, BL480W-70, BL481-70, BL482-70, BL483-70, BL484-70
DOES NOT WORK FOR THIS MODELS Nutri Ninja Pro Blender 900w BL450-30, BL451-30, BL454-30, BL455-30 and 1000w Auto-iQ BL480-30 BL481-30 BL482-30 BL484-30
Replacement Blade with 7 Fins Gear on Bottom of Blade Assembly for 900W/1000W Nutri Ninja Blender BL2012/BL2013/BL450/BL480/BL480D/481/482/486/487/487A/488W/490/491/492/492W/640/642 (Not6 Fin Gear)
- Warning：You should be rest the blade when you use by long time! Intermittent use can ensure blade use lift!
- 6fins blade and 7 Fins motor Gear – 4″/10CM Diameter – Compatible with L2012, BL2013, BL480, BL481, BL482, BL486CO, BL487, BL488W, BL490, BL491, BL492, BL640, BL641, BL642, BL680A, BL682, NN100, NN101, NN102
- Packing Includes 1 x 6blade and 7 Fins Bottom Gear Assembly, 1 x Gasket Rubber.
- BPA Free, Effortlessly Pulverizes Fruits, Vegetables, Superfoods and Protein Shakes into a Delicious, Smooth Texture.
- It Should Be 7 fin Moter Gear as picture .noted: this blade Not fit modle below:Nutri Ninja Pro Blender 900w BL450-70, BL451-70, BL454-70, BL455-70 and 1000w Auto-iQ BL480-70, BL480W-70, BL481-70, BL482-70, BL483-70, BL484-70
Best Accessories Nutri Ninja Blander Replacement Parts – Nutri Ninja Pro Extractor Blades Assembly The Pro Extractor Blades Assembly is compatible with Tritan Nutri Ninja cups, Stainless Steel Nutri Ninja Cups and the XL 48 oz. Multi-Serve Nutri Ninja Jar. Compatible with: nutri ninja model Nutri Ninja Pro BL450 Nutri Ninja Nutri Bowl DUO with Auto-iQ Boost – NN100/N100A/NN101 Nutri Ninja Ninja BlendMax DUO with Auto-iQ Boost – BL2012/BL2013 Nutri Ninja Auto-iQ -BL480/BL480D/BL490 Nutri Ninja Ninja Blender DUO with Auto-iQ BL640/641/BL642/BL642W/BL642Z This set are generic accessories, not original accessories Note: 1. The rubber garsket in bottom blade maybe loosened during transportation. Before using the bottom blade, please check the rubber garsket and be sure it is put snugly into the bottom blade. 2. This bottom blade applies to many models, before purchasing, please check your machine, if it is 7 fins gear and 4inches, this will fit it.
32oz Cup with spout lid and blade 7 Fins Gear Replacement Parts Blade Assembly for 900W/1000W NUTRI NINJA PRO BL450 30/BL 456 30/ BL455 30 or 900W Nutri Ninja Pro Deluxe BL451 30
- Ninja Blade Replacement-7 Fins, 4″/10CM diameter, 165g, made of food grade PP and stainless steel (Should you have any question about this item, feel free to contact us! ) Packing include: 1x 7 Fins Bottom Blade Assembly, 1 x 32oz cup ，1x spout lid
- Ninja Blade Apply to:900W/1000W NUTRI NINJA PRO BL450 30/BL 456 30/ BL455 30and 900W Nutri Ninja Pro Deluxe BL451 30
- Note1: The rubber gasket in bottom blade maybe loosened during transportation. Before using the bottom blade, please check the rubber gasket and be sure it is put snugly into the bottom blade
- Please confirm your blender need 7 fins replacement blade before purchasing
- This is just general parts， this isn’t original blade and cup
This Set can Works with these models: 900W/1000W NUTRI NINJA PRO BL450 30/BL 456 30/ BL455 30 or 900W Nutri Ninja Pro Deluxe BL451 30
NLSD Ninja Blender Replacement Parts Ninja Bottom Blade 6 Fins for Nutri Ninja Auto iQ BL482 BL456 Blenders (FEMALE FINS ONLY)
- BEFORE PURCHASING PLEASE CHECK YOUR EXISTING BLADE BY COUNTING THE FINS IT SHOULD BE “FEMALE” Fin’s on the Blade and 4″ (10cm) Diameter
- BEFORE PURCHASING: Please check all the images on this Product Detail page to make sure you are buying the right Blade for your Blender.
- FIT for Nutri Ninja Auto iQ BL480 BL480D BL482 Ninja Professional BL456 Blenders
- Made of food grade BPA Free plastic and stainless steel, effortlessly pulverizes fruits, vegetables, super foods and protein shakes into a delicious, smooth texture. Dishwasher safe.
BEFORE PURCHASING you need to check your Old Blade to make sure the following,.
1) Count the FINS IT SHOULD BE 6-FINS.
2) The blade has FEMALE FINS
3) 4″ (10cm) Diameter.
BEFORE PURCHASING Please check all the images on this Product Detail page to make sure you are buying the right Blade for your Blender.
Warranty Policy
●All products sold by NLSD are covered by 3 months warranty.
●NLSD endeavours to provide customer with new replacement for any product within 15 days from the date of purchase.
●If a customer received a product which is faulty or damaded on arrival, please notify us within 15 days.
●Beyond 15 days, NLSD will provide customer a refund, exchange or repair the product.
Ninja Blender Replacement Parts 7 Fins Replacement Extractor Blade Parts for Nutri Ninja Blender Blade Assembly Fits 1000w Nutri Ninja Auto-iQ BL480-30 BL482-30 BL682 BL640
- 【Ninja Blade Apply to】7 fins Nutri Ninja Auto iQ BL2012, BL2013, BL480, BL480D, BL481, BL482-30, BL486CO, BL487, BL487A, BL488W, BL490, BL491, BL492, BL492W, BL640, BL641, BL642, BL642W, BL642Z, BL680A, BL682, NN100, NN100A, NN101, NN102, BL2012 (Please confirm your blender need 7 fins replacement blade before purchasing).
- 【Nutri Ninja Replacement Parts】 Pro Extractor Replacement Blade by Best Potok. 7 Fins, 4″/10CM diameter, 165g, made of food grade PP and stainless steel.
- 【Important Tips】Note1: The rubber gasket in bottom blade maybe loosened during transportation. Before using the bottom blade, please check the rubber gasket and be sure it is put snugly into the replacement bottom blade.Note2: Please TAKE OFF the PRE-INSTALLED GASKET in the bottom blade, if you’re going to use this replacement gasket.
- 【Packing Include】 1x 7 Fins Bottom Blade Replacement, 2 x Replacement Gasket Rubber ( One Gasket Rubber already on the 7 fins replacement blade). Please check your existing blade by counting the fins before purchase. It Should Be 7fin.
- 【100% SATISFACTION GUARANTEE】 If you are buying before or after purchase any questions, please feel free to contact us, we’ll issue you a full refund or replacement.
One Ninja replacement blade assembly (7-fin as pictured) for Nutri Ninja Blender. Fits NUTRI NINJA r BL487 BL487QPL BL488W BL490 BL491 BL492 BL492W BL640 BL641 BL642 BL642W BL642Z BL680 BL680A BL682 BL450-30, BL451-30, BL454-30 & BL456-30.
KIND REMINDER BEFORE PURCHASE:
1: Your original motor base must be 7 fins. The Nutra Ninja Replacement Blade can’t fit all the 7 fins blender’s motor base: there are too many models of ninja blender blade, if the last two digitals(not part of model #) or any character is difference, please don’t purchase it
2: Your blender model must be identical with our stated model.”ONLY COMPATABLE WITH” 7 fins model Auto iQ BL2012, BL2013, BL480, BL480D, BL481, BL482-30, BL486CO, BL487, BL487A, BL488W, BL490, BL491, BL492, BL492W, BL640, BL641, BL642, BL642W, BL642Z, BL680A, BL682, NN100, NN100A, NN101, NN102, BL2012.
NOT FIT FOR BL660, BL663, BL740, BL770, BL771,BL773CO, BL780, BL780,BL820,BL830,BL450,BL451-70,BL454-70,BL482-70. Please check your model carefully before purchasing.
TIPS FOR USAGE
1. You are recommended to replace your ninja blender every 6 months or as needed for optimal performance
2. Please check whether the gear of the bottom loosen or tighten before use. If it’s loosen, please tighten it
3. Please check the rubber gasket and be sure it is put snugly into the bottom blade. (The rubber gasket is used to avoiding leakage）
4. Do not overfill! To avoid spilling, do not add ingredients past the “Max” fill line
5. Place the replacement blade onto the cup and screw it tightly until you have a good seal
6. Please make sure it in right place and locked tightly
7. Do not run your blender over 4 minutes at a time to prevent overheating of the blender
Replacement Extractor Blade 7 Fin For Nutri Ninja 1000W Auto iQ BL682 BL642 BL641 Blender
- nt part for Nutri Ninja Blender, make your Juicer reuse again and perfect for all your blending and mixing needs.
- BPA Free, Effortlessly pulverizes fruits, vegetables, superfoods and protein shakes into a delicious, smooth texture.
- Fits for BL487 BL487QPL BL488W BL490 BL491 BL492 BL492W BL640 BL641 BL642 BL642W BL642Z BL680 BL680A BL682 BL450-30, BL451-30, BL454-30 & BL456-30
- Please check your existing blade by counting the fins before purchase. It Should Be 7fin
- 100% SATISFACTION GUARANTEE
One Ninja replacement blade assembly (7-fin as pictured)for Nutri Ninja Blender. Fits NUTRI NINJA r BL487 BL487QPL BL488W BL490 BL491 BL492 BL492W BL640 BL641 BL642 BL642W BL642Z BL680 BL680A BL682 BL450-30, BL451-30, BL454-30 & BL456-30.
Ninja Blender Bottom Blade 7 Fins For Nutri Ninja Pro Extractor Blade Nutri Ninja Auto iQ BL480-30 BL482 BL642 NN102 BL682 BL2013 BL640 BL642Z BL480D, Nutri Ninja Blender Auto iQ Blade
- 【Bottom Blade Apply to】7 fins Nutri Ninja Auto iQ BL2012, BL2013, BL480, BL480D, BL481, BL482-30, BL486CO, BL487, BL487A, BL488W, BL490, BL491, BL492, BL492W, BL640, BL641, BL642, BL642W, BL642Z, BL680A, BL682, NN100, NN100A, NN101, NN102, BL2012 (Please confirm your blender need 7 fins replacement blade before purchasing).
- 【 Replacement Parts for Nutri Ninja 】 Pro Extractor Replacement Blade by Best Potok. 7 Fins, 4″/10CM diameter, 165g, made of food grade PP and stainless steel.
- 【Important Tips】Note1: The rubber gasket in bottom blade maybe loosened during transportation. Before using the bottom blade, please check the rubber gasket and be sure it is put snugly into the replacement bottom blade.Note2: Please TAKE OFF the PRE-INSTALLED GASKET in the bottom blade, if you’re going to use this replacement gasket.
- 【Packing Include】 1x 7 Fins Bottom Blade Replacement, 3 x Replacement Gasket Rubber ( One Gasket Rubber already on the 7 fins replacement blade). Please check your existing blade by counting the fins before purchase. It Should Be 7fin.
- 【Risk-free Purchase】 The warranty is 12 Months. We will issue full refund if you are not satisfied with the products.If there is any problem with the product, please contact us in time, we will promptly replace it for you or make a full refund.
Blender Bottom Blade (7-fin as pictured) for Nutri Ninja Blender. Fits NUTRI NINJA r BL487 BL487QPL BL488W BL490 BL491 BL492 BL492W BL640 BL641 BL642 BL642W BL642Z BL680 BL680A BL682 BL450-30, BL451-30, BL454-30 & BL456-30.
KIND REMINDER BEFORE PURCHASE:
1: Your original motor base must be 7 fins. The Nutra Ninja Replacement Blade can’t fit all the 7 fins blender’s motor base: there are too many models of ninja blender blade, if the last two digitals(not part of model #) or any character is difference, please don’t purchase it
2: Your blender model must be identical with our stated model.”ONLY COMPATABLE WITH” 7 fins model Auto iQ BL2012, BL2013, BL480, BL480D, BL481, BL482-30, BL486CO, BL487, BL487A, BL488W, BL490, BL491, BL492, BL492W, BL640, BL641, BL642, BL642W, BL642Z, BL680A, BL682, NN100, NN100A, NN101, NN102, BL2012.
NOT FIT FOR BL660, BL663, BL740, BL770, BL771,BL773CO, BL780, BL780,BL820,BL830,BL450,BL451-70,BL454-70,BL482-70. Please check your model carefully before purchasing.
TIPS FOR USAGE
1. You are recommended to replace your ninja blender every 6 months or as needed for optimal performance
2. Please check whether the gear of the bottom loosen or tighten before use. If it’s loosen, please tighten it 3. Please check the rubber gasket and be sure it is put snugly into the bottom blade. (The rubber gasket is used to avoiding leakage）
4. Do not overfill! To avoid spilling, do not add ingredients past the “Max” fill line 5. Place the replacement blade onto the cup and screw it tightly until you have a good seal
6. Please make sure it in right place and locked tightly 7. Do not run your blender over 4 minutes at a time to prevent overheating of the blender
Replacement Nutri Ninja 6-Fin Extractor Blade FITS Nutri Ninja Blender Auto iQ BL450-70 BL451-70 BL454-70 BL482-70 Only fit for 18 oz 24 oz.32 oz
- NUTRI NINJA 6 FIN Blade for Nutri Ninja Blender FITS ONLY THIS MODELS 900W BL450-70, BL451-70, BL454-70, BL455-70 1000W BL480-70, BL480W-70, BL481-70, BL482-70, BL483-70,BL484-70
- DOES NOT FIT THIS MODELS BL450-30, BL451-30, BL454-30, BL455-30 1000W BL480-30, BL480W-30, BL481-30, BL482-30, BL483-30,BL484-30
- BPA Free Replacement Blade for Nutri Ninja Blender, make your Juicer reuse again and perfect for all your blending and mixing needs.
- DOES NOT FIT 16oz CUPS bl770,bl771
- 1 Year Warrenty
NUTRI NINJA 6 FIN BLADES WORKS FOR THIS BLENDERS ONLY Nutri Ninja Pro Blender 900w BL450-70, BL451-70, BL454-70, BL455-70 and 1000w Auto-iQ BL480-70, BL480W-70, BL481-70, BL482-70, BL483-70, BL484-70 DOES NOT WORK FOR THIS MODELS Nutri Ninja Pro Blender 900w BL450-30, BL451-30, BL454-30, BL455-30 and 1000w Auto-iQ BL480-30 BL481-30 BL482-30 BL484-30,
Ninja Pro Replacement Nutri Ninja 24 oz Cup with Sip & Seal Lid – For Blender BL450 BL454 Auto-iQ BL480 BL481 BL482 BL687 (2-Pack)
Ninja Pro 24 oz Cups For Nutri Ninja Blender With Sip & Seal Lid 2-PACK
Our Promise to Readers
We keep receiving tons of questions of readers who are going to buy nutri ninja pro bl450 replacement blade, eg:
- What are Top 10 nutri ninja pro bl450 replacement blade for 2020, for 2019, for 2018 or even 2017 (old models)?
- What is Top 10 nutri ninja pro bl450 replacement blade to buy?
- What are Top Rated nutri ninja pro bl450 replacement blade to buy on the market?
- or even What is Top 10 affordable (best budget, best cheap or even best expensive!!!) nutri ninja pro bl450 replacement blade?…
- All of these above questions make you crazy whenever coming up with them. We know your feelings because we used to be in this weird situation when searching for nutri ninja pro bl450 replacement blade.
- Before deciding to buy any nutri ninja pro bl450 replacement blade, make sure you research and read carefully the buying guide somewhere else from trusted sources. We will not repeat it here to save your time.
- You will know how you should choose nutri ninja pro bl450 replacement blade and What you should consider when buying the nutri ninja pro bl450 replacement blade and Where to Buy or Purchase the nutri ninja pro bl450 replacement blade. Just consider our rankings above as a suggestion. The final choice is yours.
- That’s why we use Big Data and AI to solve the issue. We use our own invented, special algorithms to generate lists of Top 10 brands and give them our own Scores to rank them from 1st to 10th.
- You could see the top 10 nutri ninja pro bl450 replacement blade of 2020 above. The lists of best products are updated regularly, so you can be sure that the information provided is up-to-date.
- You may read more about us to know what we have achieved so far. Don’t hesitate to contact us if something’s wrong or mislead information about nutri ninja pro bl450 replacement blade.
Conclusion
By our suggestions above, we hope that you can found nutri ninja pro bl450 replacement blade for you.Please don’t forget to share your experience by comment in this post. Thank you!
