Which Is The Best Hot Water Heater 40 Gal

The heat electric tank less water heater S-16 model has the capacity of heating 3.5 gpm which is the equivalent to 2 showers (at 1.5 gpm each), and 1 sinks (at 0.50 gpm each) simultaneously, or any combination which equals to 3.5 gpm. The S-16 can handle these applications in the warmer climates of the us which are Florida, Georgia, Louisiana, Texas, Arizona, California, Alabama, and Mississippi. Anything north of these States the S-16 model can be used for point of use, or 1- application at a time. A good rule of thumb is if you live in the southern States mentioned here the S-16 can power a 3 to 4 bedroom 2-1/2 bathroom home, including dishwasher and clothes washer, please keep in mind that tank less water heaters are designed to heat incoming water at a maximum output temperature based on simultaneous use and inlet water temperatures. So if your demand for hot water decreases your output water temperatures will increase, as well as if you live in the colder States this S-16 will heat less volume of water, this will cause the S-16 to be used in point of use applications in the colder climates.

40 gallon, electric water heater, dual 4500w, 240v elements, 3″ insulation, .95 energy factor,recovery at a 90º rise-gallons/ hours 21, first hour rating 55, t & p valve, pex polymer lined heat trap nipples, pex dip tube, glass lined tank, aluminum anode rod, dimensions: 50″h x 22″d, 6 year tank & parts warranty, meets new naeca 2015 efficiency standards.

This compact , yet powerful unit – with gas inputs up to 140,000 BTU per hour – can meet all the hot-water needs of a small to medium American home or apartment. Designed to virtually do anything a 40-gallon tank-type water heater can do and much more The Wall mounted Excel Pro is design to work with hydronic baseboard or radiant floor heating applications, as well as provide domestic hot water to plumbing fixtures and appliances. LCD Display Control: Just set the desired water temperature The Excel Pro has an energy factor of 0.84-0.85. Excel Pro: Modulating Technology Tankless water heaters can be further divided into two categories according to their heating capability: “full on/full off” versus “modulating”. Full on/full off units do not have a variable power output level; the unit is either fully on or completely off. This can cause an annoying and possibly hazardous variation of hot water temperature, as the flow of water through the heater varies. Modulated tankless water heaters change their heat output in response to the flow rate of water running through the unit. The Excel Pro comes with a display panel where you can set the output temperature and regardless of water flow the unit modulates the fire power. Pure Copper Heat Exchanger * As used by other top of the line tankless gas water heater manufacturers like Rinnai, Takagi, Rheem and Noritz. Features & Benefits Super compact 14.5″ x 23″ x 5.5″ size 84%+ thermal efficiency 140,000 BTU maximum input 6.6 gallons/ minute capacity at 35F degree rise Minimum activation flow rate of 0.5 gpm Electronic ignition. Has a Power vented fan that Vents directly vertically or horizontally with 3” stainless steel flue 3′ long flue and elbow included. Can be used in recirculation and space heating application . Delivers 6.6 gpm of hot water with a 35°F Instant Temperature Rise (Equivalent to 5.5gpm with a 45F temp Rise). European Model Digital Display is in Celsius.

The Atmospheric Vent FVIR Defender Safety System® Models Feature: ■ Bradford White ICON System™—Intelligent gas control with proven millivolt powered technology and built-in piezo igniter. A standard, off the shelf thermopile converts heat energy from the pilot flame into electrical energy to operate the gas valve and microprocessor. No need for external electricity. — Enhanced Performance—Proprietary algorithms provide enhanced First Hour Delivery ratings and tighter temperature differentials. — Advanced Temperature Control System—Microprocessor constantly monitors and controls burner operation to maintain consistent and accurate water temperature levels. — Intelligent Diagnostics—An exclusive green LED light prompts the installer during start-up and provides ten different diagnostic codes to assist in troubleshooting. — Pilot On Indication—Flashing green LED provides positive indication that pilot is on. — Separate Immersed Thermowell—High-strength advanced polymer composite thermowell provides isolation between electric temperature sensor and surrounding water. No need to drain the tank when removing gas valve. ■ Advanced ScreenLok® Technology Flame Arrestor Design—Flame arrestor is designed to prevent ignition of flammable vapor outside of the water heater. ■ Resettable Thermal Switch—Proven and reliable bimetallic switch prevents burner and pilot operation in case of ongoing flammable vapor burn inside of the combustion chamber or restricted air flow. ■ Maintenance-Free—No regular cleaning of air inlet openings or flame arrestor is required under normal conditions. ■ Sight Window—Offers a view into the combustion chamber to observe the operation of the pilot and burner. ■ Factory-Installed Hydrojet® Total Performance System—Cold water inlet sediment reducing device helps prevent sediment build-up in tank. Increases first hour delivery of hot water while minimizing temperature build-up in tank.

Please note: this product comes standard as a 240V model. This product is also available in 120V, 208V, 277V, 480V. Please call customer service if you require one of these non-standard voltages.

The ProMax family offers a wide range of water heating solutions-from models that help you qualify for gas utility rebates to high recovery models ideal for large families with high demand for hot water. And, our specialty vent gas water heater options can be installed almost anywhere in your home because they can vent up to 40 feet. Our direct vent models feature two-pipe combustion systems that draw clean air from outside the home, eliminating any worries about indoor ventilation.

40 gallon, electric water heater, dual 4500W, 240V elements, 3″ insulation, 95 energy factor, recovery at a 90 degrees rise-gallons/hours 21, first hour rating 55, t & p valve, pex polymer lined heat trap nipples, pex dip tube, glass lined tank, aluminum anode rod, dimensions: 50″h x 22″d, 6 year tank & parts warranty, meets new naeca 2015 efficiency standards.

Conclusion

By our suggestions above, we hope that you can found hot water heater 40 gal for you.Please don’t forget to share your experience by comment in this post. Thank you!