The 9 Best Shut Off Valve For Ice Maker

What is it?

PureSec 2018 HV1414 mini white plastic quick fitting straight inline shut off Ball valve Hand valve is made of 100% BPA Free thermoplastic material (Polypropylene), which is suitable for use in hot(140°F Max) and cold (33°F Min.)water applications. It adopts Push-Fit technology, which allows users to connect and disconnect quick and easy without the need of any other tools. It gives full flow and positive shut off without leakage, which is very easy to install. Valve act is 90 degrees, full on to full off, with no seepage.This little valve fits standard tubing OD 1/4″Copper, CPVC, PEX and PVC tubing for most RO systems

Where to use it ?

Applications include RO system, beverage dispensing, refrigerator ice maker, coffee machine etc. This quick connect fitting is perfect for hooking up a kitchen water supply , it isolate water line without shutting off all the cold water to the kitchen. It will save you lots of work getting to replace your in-line water filter without having to turn the water off in the basement or under the sink.You can also use it to run the RO System to the fridge ice maker.

How to use it ?

Just pop in your 1/4″tubing into either end, pushing until it won’t go in. To remove, just push in the outer circle on either end and pull right out. You need to make sure the tubing is cut squared to insure no leaks.

PureSec 2018 HV1414 mini white plastic quick fitting straight inline shut off Ball valve Hand valve is quality, reliability, and economy in potable water service.

What’s in the package?

PureSec 2018 HV1414 mini white plastic quick fitting straight inline shut off Ball valve Hand valve

“C” clip

★Material:

Lead free brass,much more heathy for human.

★Package include:

2 PCS 1/4 inch compression x 1/4 inch compression

Product Description

Jg Speed fit Ppsv040808Wp 1/4″ X 1/4″ Od Valve Start, White the Ppsv Range And Shut-Off Valve Is Offered For Tube Sizes 1/4″ O.D. And 3/8″ O.D., Produced In Polypropylene And Fitted Epdm O-Rings. Polypropylene Has The Advantage Of Being More Chemically Resistant Than Acetal. The Valves Are Use With Potable Water. Jg Speed fit Ppsv040808Wp 1/4″ X 1/4″ Od Valve Start, White Features: Designed For Hot And Cold Water And Radiant Heating Systems Push Fit Fittings Twist And Lock For Added Security No Tools Required Works With Copper, Cvpc, And Pex Pipe Permanent Leak-proof Connection Easy To Install Lead Free 1/4″ X 1/4″ Od

From the Manufacturer

JG Speedfit is the easy to use, plastic push-fit system suitable for the plumbing of hot and cold water services and heating applications.

CUT. PUSH. DONE.
The SharkBite Connection System makes any plumbing project fast and easy with our unique push-to-connect technology. When you insert a pipe into the SharkBite quick connect fittings, the stainless steel teeth bite down and grip the pipe, while the specially formulated O-ring compresses to create the perfect watertight seal.

We use high quality DZR Lead Free Brass for our 1/2” x 1/2” x 1/4” 1/4 Turn Tee Stop Valve. Chrome plated valve for an attractive appearance. This SharkBite Tee Stop allows you to easily and effortlessly tap into a current or new plumbing line and run a 1/4” compression line out to an end fixture. Makes it easy to add a humidifier, dishwasher, ice maker, faucet installation or toilet installation to a new or existing line. Alternatively, can be used as a saddle valve.

Our product works with your existing plumbing, is easy to disassemble for changing fittings, and can be rotated for easier installation in tight spaces. SharkBite push connect fittings are the no fuss way to fix small leaks or plumb a whole house. Whether you need to repair a broken pipe or plumb a whole house, SharkBite fittings are the push-to-connect solution for leak-free results.

SHARKBITE
SharkBite is a provider of plumbing and water control systems for domestic, commercial and industrial applications. As the world leader and hallmark of push-to-connect plumbing solutions, our goal is to continue innovating the plumbing trade with new solutions that improve efficiency and performance. Trusted by plumbing professionals, SharkBite manufactures a wide range of plumbing fittings, water control valves and PEX pipe, making it the only total plumbing solution from meter to fixture.

Product Description

This Fluidmaster Braided Stainless Steel 5-Foot (60 in) Length Ice Maker Supply Line connects your Icemaker to the wall water supply. Fluidmaster Icemaker water supply connectors are built to last. Made of a tough polymer core covered with braided stainless steel wire, these connectors exceed every code requirement in the book for durability. Fluidmaster offers a wide variety of types and sizes, perfect for your home improvement efforts. A proven supply line that won’t crease or tangle even in the tightest of corners. Durability and ease-of-use were at the forefront of this design, with the nickel plated brass hex nuts for easy to grip tightening. A 1/4-Inch female compression thread by 1/4-Inch female compression thread connector with an efficient flow rate. Code approved with a 5 year warranty.

From the Manufacturer

Fluidmaster is the #1 toilet repair brand in the world. Fluidmaster parts are found in more toilets than all other brands. The customer’s first choice and preferred supplier of toilet tank trim since 1957. Fluidmaster’s complete line of toilet repair parts includes; fill valves, flush valves, flappers, tank levers, dual flush valves, bowl wax, toilet repair kits, seals, connectors and more. With manufacturing facilities across the world, Fluidmaster reaches over 90 countries worldwide with unparalleled quality.

This Eastman 60234 Pre-assembled Ice Maker Outlet Box is designed for recessed residential applications. It has a 1/2 inch CPVC inlet connection and a 1/4-inch OD compression outlet with a rough opening of 5-3/4-inch width x 4-7/8-inch height x 3-1/2-inch diameter.

The outlet box comes complete with a pre-installed 1/4-turn ball valve, support bracket, and a faceplate cover of dimensions 8-1/4-inch width x 7-5/16-inch height. It is built with one-piece box and flange design. Valves governed by this Standard are intended for service at temperatures between 34⁰ F (1⁰ C) and 180⁰ F (82⁰ C), with an allowable working pressure rating not less than 125 PSI (862 kPa).

The SharkBite Ice Maker Outlet Box is integrated with SharkBite push-to-connect ends to allow for quick and easy installation of a water main supply and shutoff for refrigerator ice maker and water dispenser appliances using Copper, PEX, CPVC, or PE-RT water lines. This is lead-free compliant and is offered with or without integral water hammer arrestors for water shockwave prevention. The box can be mounted to the left or right of the stud bay and needs no additional support framing. The snap-on faceplate accommodates up to 3/4″ drywall. 1/2″ SB X 1/4″ Compression Can be used with copper, cpvc or pex lines Decease the time & effort needed to connect water distribution pipe, no glue, soldering or crimping needed Simply cut your pipe, deburr, mark the pipe approximately 1″ For proper insertion depth, install pipe to proper depth Use behind your refrigerator, ice maker, or water dispenser to provide a clean installation & allow for easy shut off Includes the ice maker outlet box Faceplate cover, 2 support brackets.

Conclusion

By our suggestions above, we hope that you can found shut off valve for ice maker for you.Please don’t forget to share your experience by comment in this post. Thank you!