Best 560Mm Liquid Cooling Radiators

The Pacific RL560 560mm radiator allows high airflow with standard capacity to support hardcore enthusiasts looking to provide sufficient cooling performance to all components.

EK-CoolStream SE is a slim, high-performance computer liquid cooling radiator which combines EK’s unique CSQ design with latest radiator core engine. Built for EK-Vardar 140mm high static pressure fans, these radiators are optimized for maximum heat dissipation across entire fan operational range thus delivering exceptional performance at both low- and high airflow operation. EK assured quality level, optimal price-performance ratio and unique minimalistic design make these EK-CoolStream SE series radiators a perfect choice for any computer water cooled system. Overall compact measurement of the SE series radiator allow for utilization even in the tiniest computer chassis. This radiator offers best cooling capacity in 28mm thick radiator class: copper fins provide massive surface area while the parallel flow cooling chambers reduce hydraulic flow resistance to a minimum. Radiator shrouds are tapped with UNC 6-32 threads on both sides to enable push-pull fan installation to even further increase the cooling performance. This product features two recessed G1/4 threaded ports with two pre-installed extenders to allow any G1/4 threaded fitting to be used. EK recommends EK-ACF series compression fittings.

Model: 3831109860519

Alphacool has been a trendsetter on the scene for developing and improving radiators for years. That’s why these models are among the first radiators to really earn the descriptor “full copper”! All the main elements, not just the fins and channels, but also the channel heads are made of copper. Material-wise, this is a big advantage, and one where other radiators fall by the wayside. The Alphacool NexXxoS X-Flow radiators set themselves apart significantly from conventional radiators in their construction. The X-Flow radiators are built for high flow rates. The slanted copper chambers on either side are built identically. This means the water can flow through all the channels at the same time until it flows into the opposite chamber and leaves the radiator. Freedom in the installation is one of the central points on which Alphacool’s development department focused. Fewer angles are needed, which increases the flow rate and offers more options in the installation. The installation of the radiators, as well as the fans and radiator faceplates, is easy to do with this series: the M3 threads are standard in the radiator sector, affordable and available in all lengths. Even the dreaded mishap of turning the screws in too deeply won’t lead to costly damage with this radiator: an inner protective edge stops the screw before it can come into contact with the fins. The fin spacing was chosen so that the radiator could reach its optimal cooling performance even with slow or medium-speed fans. This is not only comfortable in terms of background noise, but also puts no constraints on the choice of fans.

Model: 14243

The XSPC TX is the worlds thinest PC radiator. At just over 20mm thick, it’s 20% thinner than a standard 120mm fan and over 40% thinner than our EX series radiators. Despite its size, the TX series offers both excellent performance and low flow restriction. This comes from the high performance copper and brass core, which features welded seam tubes and high density splitter fins. We further enhansed performance by designing fins which protrude past the tubes. This allowed us to increase the cooling surface area without increasing the external dimensions. With 13 tubes and 22 fins per inch it’s the highest density core XSPC have ever released, but due to the thinness of the core it still performs with low speed fans. The TX series is ideal for any build where space is at a premium. Supplied 30mm and 6mm 6-32 UNC screws. Supplied 30mm and 6mm 6-32 UNC screws.

Model: 5060596650480

EK-CoolStream Classic SE 360 slim copper radiators are designed for optimal airflow throughout the radiator surface with medium density fin structure. Built for EK-Vardar 120mm high static pressure fans, these radiators are optimized for maximum heat dissipation across entire fan operational range thus delivering exceptional performance at both low and high airflow operation.

EK quality level, best price-performance ratio to date and unique minimalistic design make these EK-CoolStream Classic SE series radiators a perfect choice for any computer water cooled system. 27mm thick design allows for utilization even in the space-constrained cases while allowing great cooling potential due to the high-performance core engine.

This product features two G1/4 threaded ports. EK recommends the use of EK compression fittings.

Technical details:
Material:
– Copper fins
– 90% copper tubing (H90)
– Brass chambers
– Steel housing

Dimensions: 393 x 120 x 27mm (L x W x H)
Weight: 0.37kg
Liquid Capacity: ~155mL
FPI: 16
Port threads: 2x G1/4
Fan compatibility: any standard size 120x120x25mm fan; UNC 6-32 thread tapping
Pressure tested: 1bar(g)

Enclosed:
– EK-CoolStream Classic SE series radiator
– Phillips Slotted UNC 6-32 screws (l=30mm)
– Phillips Slotted UNC 6-32 screws (l=5mm)

PLEASE NOTE:

• When using fans other than standard 120x120x25mm size please use appropriately long screws!Use of the improperly long screws may result in piercing of the radiator core and irreparably damage the product. Such misuse is not covered by product warranty!
• This product should NOT be installed with any aluminum Fluid Gaming parts!

Model: 3831109817339

Introducing a new generation of performance PC radiators. The EX series combines the low profile design of our RS series radiators with the high performance of our award winning RX V1 series. This feat has been possible due to several manufacturing advances including, split fins, improved soldering techniques, and welded seam tubes. The EX series has been designed and optimised for low speed fans, so it can offer high performance cooling at very low noise levels. Supplied 30mm and 6mm 6-32 UNC screws.

Model: 5060175586254

The XSPC EX series combines the low profile design of our RS series radiators with the high performance of our award winning RX V1 series. This has been possible due to several manufacturing advances including, split fins, improved soldering techniques, and welded seam tubes. The EX series has been designed and optimised for low speed fans, so it can offer high performance cooling at very low noise levels. Crossflow radiators allow for easier tubing routing in some PC builds. Our selectable crossflow design allows you to choose the most suitable inlet and outlet positions for your build. Supplied with two G1/4″ plugs, 30mm and 6mm 6-32 UNC screws

Model: 5060175587275

EK-CoolStream SE is a slim, high-performance computer liquid cooling radiator which combines EK’s unique CSQ design with latest radiator core engine. Built for EK-Vardar 120mm high static pressure fans, these radiators are optimized for maximum heat dissipation across entire fan operational range thus delivering exceptional performance at both low- and high airflow operation. EK assured quality level, optimal price-performance ratio and unique minimalistic design make these EK-CoolStream SE series radiators a perfect choice for any computer water cooled system. Overall compact measurement of the SE series radiator allow for utilization even in the tiniest computer chassis. This radiator offers best cooling capacity in 28mm thick radiator class: copper fins provide massive surface area while the parallel flow cooling chambers reduce hydraulic flow resistance to a minimum. Radiator shrouds are tapped with UNC 6-32 threads on both sides to enable push-pull fan installation to even further increase the cooling performance. This product features two recessed G1/4 threaded ports with two pre-installed extenders to allow any G1/4 threaded fitting to be used. EK recommends EK-ACF series compression fittings.

Model: 3831109860472

Conclusion

By our suggestions above, we hope that you can found 560mm liquid cooling radiators for you.Please don’t forget to share your experience by comment in this post. Thank you!