onceownedby 
Nowadays, there are so many products of vent accessories for heating ducts in the market and you are wondering to choose a best one. You have searched for vent accessories for heating ducts in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings vent accessories for heating ducts which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
![12" X 2" Toe Space Grille - HVAC Vent Cover [Outer Dimensions: 13.25 X 3.25] - Brown](https://onceownedby.com/wp-content/uploads/2019/12/b5204aaf039b4800b770b352c3f8367f.webp)
12" X 2" Toe Space Grille – HVAC Vent Cover [Outer Dimensions: 13.25 X 3.25] – Brown
- Powder-Coat Finish – Smooth, Shiny, Scratch-Resistant, Beautiful. Looks Like It Was Just Waxed
- Quality Packaging – Carefully Shrink Wrapped with Cardboard Backing to Prevent Damage in Shipment
- Smooth Surface Edges – Run Your Fingers Across The Surface To Feel The Smoothness
- Easy Unrestricted Air Flow For Your HVAC System
- 12″ x 2″ opening (vent hole – Neck Size) dimension – actual size is approx 1.25″ wider
12″ x 2″ Toe Space Grille – HVAC Vent Cover
HVAC Premium has been providing superior in quality service for many many years. Our products are second to none,
and we’ve helped numerous contractors, DIY projects, and home improvement remodeling specialists complete their masterpiece.
If you are looking for a top of the line unit to enhance your project look no further than HVAC Premium.
We have the largest selection of Grilles Registers & Diffusers. HVAC Premium has sold over 5,000,000 Grilles – We are proud of our many happy customers!
You may think of grilles and registers as a generic component of the ventilation system in your house. But they are also the most
visible representation of your air system.
These grilles and registers give you an extra measure of quality that are visible to your family members and house guests.
Some of the best features aren’t readily apparent, but you will appreciate the benefits over the period of time.
This grille has a high standard of design, production and finish on all products.
How To Measure A Grille
Overall Size: MEASURE the size of the DUCT OPENING. Do not measure the old vent cover.
If your duct opening is 14″ wide by 20″ tall, order a 14×20. Width vs Height The first number in a grille size, represents the width,
the second number represents the height.
Example: If your hole is 20″ wide by 14″ tall, order a 20×14. If your hole is 14″ wide by 20″ tall, order a 14×20.
100% Satisfaction Guaranteed
Don’t worry, you’re covered by our 100% money back guarantee no questions asked. Click Add to Cart Now!
and enjoy a new updated refreshing look to your home.
Similar items with 4 stars and above
10" x 6" – 1-Way Air Vent – Adjustable Aluminum Curved Blades – Maximum Air Flow – HVAC Grille
- Powder-Coat Finish – Smooth, Shiny, Scratch-Resistant, Beautiful. Looks Like It Was Just Waxed
- Quality Packaging – Carefully Shrink Wrapped with Cardboard Backing to Prevent Damage in Shipment
- Smooth Surface Edges – Run Your Fingers Across The Surface To Feel The Smoothness
- Screws Included – Easy Unrestricted Air Flow For Your HVAC System
- 10″ x 6″ – opening (vent hole – Neck Size) dimension – actual size is approx 2″ wider
10″ x 6″ – 1-Way Air Vent – Adjustable Aluminum Curved Blades – Maximum Air Flow – HVAC GrilleWhy HVAC Premium?
You may think of grilles and registers as a generic component of the ventilation system in your house.
But they Are also the most visible representation of you air system.
With HVAC Premium you get an extra measure of quality that will be visible to your family members and house guests.
Every part is hand inspected for quality before it is packaged, no exceptions.
No Sharp Surface Edges.Just run your finger along the edge of the top plate and you will find a smooth finished surface.
High Quality AluminumThe premium durable Aluminum will Never Rust and it will never wear through leaving the material
with an elegant, beautiful, and smooth surface, adds a luxurious touch to any home.
How To Measure A Grille
Overall Size:
Measure the size of the air duct/drywall opening. Do not measure the overall size of the register itself, only measure the “hole”
in the wall/duct. Every grille has a front end frame, that will overlap at wall joint.
Width vs Height
The first number in a grille size, represents the width, the second number represents the height. Example: If your hole is 20″ wide by 14″ tall,
order a 20×14. If your hole is 14″ wide by 20″ tall,
order a 14×20.
100% Satisfaction Guaranteed
Dont worry, you’re covered by our 100% Money Back Guarantee, no questions asked. Click Add to Cart now & enjoy a new updated refreshing look of your room.
6" Round Return Air Vent Grille with Sponge Gasket and Mounting Frame – HVAC Vent Duct Register Cover [Outer Dimensions: 8"]
- 6″ Diameter Is The Size For The Duct Opening Measurement Only, Actual Front End Outer Dimensions Are 6″ Diameter
- Easy To Install – Complete set of sponge gasket and mounting frame included
- Adjustable Airflow Control – By rotating the middle disk, the gap will expand and retract to meet perfect air supply needed.
- Mounted with frame and bayonet joint which are included.
- Circular Return Air Valves – Designed To Be Used In Low And Medium Pressure Ventilation Air Conditioning Systems, Of up To 300m3/h.
6″ Round Return Air Vent Grille With Sponge Gasket And Mounting Frame – HVAC Vent Duct Register Cover. Suitable For Wall & Cieling Applications.
6″ Diameter Is The Size For The Duct Opening Measurement Only, Actual Front End Outer Dimensions Are 6″ Diameter.
When it’s time to upgrade your HVAC Vents in your house, this piece is the perfect touch of class you need to add to your decour.
Easy To Install, and Fully Adjustable to meet exact amount of Airflow needed.
High Standard Quality – Every part is hand inspected for quality before it is packaged, no exceptions.
Quality Packaging – Carefully Shrink Wrapped with Cardboard Backing to Prevent Damage in Shipment
Why HVAC Premium?
You may think of grilles and registers as a generic component of the ventilation system in your house. But they are also the most visible representation of you air system.
With HVAC Premium you get an extra measure of quality that will be visible to your family members and house guests.
How To Measure A Grille
Overall Size:
Measure the size of the air duct/drywall opening. Do not measure the overall size of the register itself, only measure the “hole” in the wall/duct. Every grille has a front end frame, that will overlap at wall joint.
Total outer size of this grille is; listed size +2″.
100% Satisfaction Guaranteed
Don’t worry, you’re covered by our 100% Money Back Guarantee, no questions asked. Click Add to Cart now & enjoy a new updated refreshing look of your room.
Similar items with 4 stars and above
10" X 2" Floor Register with Louvered Design – Heavy Duty Rigid Floor Air Supply with Damper & Lever – Brown
- 10″ X 2″ Is The Size For The Duct Opening Measurement Only, Actual Front End Outer Dimensions Are 11.5″ X 3.5″ – SEE BELOW IN DESCRIPTION HOW TO MEASURE A GRILLE
- Damper With Lever for Easy Cntrol of Airflow – Lever Is Easily Operated by Foot
- Rigid Extra Heavy Duty to withstand constant walk on situations – Quality Packaging – Carefully Shrink Wrapped With Cardboard Backing To Prevent Damage In Shipment
- Smooth Surface Edges – Run Your Fingers Across The Surface To Feel The Smoothness
- Easy Unrestricted Air Flow For Your HVAC System
10″ X 2″ Floor Register with Louvered Design – Heavy Duty Rigid Floor Air Supply with Damper & Lever – Brown
10″ X 2″ Is The Size For The Duct Opening Measurement Only, Actual Front End Outer Dimensions Are 11.5″ X 3.5″ – SEE BELOW IN DESCRIPTION HOW TO MEASURE A GRILLE
You may think of grilles and registers as a generic component of the ventilation system in your house. But they are also the most visible representation of you air system.
These grilles and registers give you an extra measure of quality that are visible to your family members and house guests.
High Standard
Every part is hand inspected for quality before it is packaged, no exceptions.
No Sharp Surface Edges. Just run your finger along the edge of the top plate and you will find a smooth finished surface.
Rigid Gauge Steel. Rigid gauge built for durability and long life in mind, but still light and handy.
Powder-Coat Finish – Smooth, Shiny, Scratch-Resistant, Beautiful. Looks Like It Was Just Waxed
Quality Packaging – Carefully Shrink Wrapped With Cardboard Backing To Prevent Damage In Shipment
Easy Unrestricted Air Flow For Your HVAC System
How To Measure A Grille
Overall Size:
Measure the size of the air duct/drywall opening. Do not measure the overall size of the register itself, only measure the “hole” in the wall/duct. Every grille has a front end frame, that will overlap at wall joint.
Total outer size of this grille is; listed size +1.5″.
100% Satisfaction Guaranteed
Don’t worry, you’re covered by our 100% Money Back Guarantee, no questions asked. Click Add to Cart now & enjoy a new updated refreshing look of your room.
Similar items with 4 stars and above
12"w x 6"h 1-Way Fixed Curved Blade AIR Supply Diffuser – Vent Duct Cover – Grille Register – Sidewall or Ceiling – High Airflow – White
- 12″w X 6″h Is The Size For The Duct Opening Measurement Only, Actual Front End Outer Dimensions Are 13.75″ Width X 7.75″ Height – SEE BELOW IN DESCRIPTION HOW TO MEASURE A GRILLE
- Multi-Shutter Damper With Handle Operator – Screws Included
- Quality Packaging – Carefully Shrink Wrapped With Cardboard Backing To Prevent Damage In Shipment
- Carefully Shrink Wrapped With Cardboard Backing To Prevent Damage In Shipment
- Easy Unrestricted Air Flow For Your HVAC System
12″w X 6″h 1-Way FIXED CURVED BLADE AIR SUPPLY DIFFUSER – Vent Duct Cover – Grille Register – Sidewall or Cieling – High Airflow – White
12″w X 6″h Is The Size For The Duct Opening Measurement Only, Actual Front End Outer Dimensions Are 13.75″ Width X 7.75″ Height – SEE BELOW IN DESCRIPTION HOW TO MEASURE A GRILLE
You may think of grilles and registers as a generic component of the ventilation system in your house. But they are also the most visible representation of you air system.
These grilles and registers give you an extra measure of quality that are visible to your family members and house guests.
High Standard
Every part is hand inspected for quality before it is packaged, no exceptions.
No Sharp Surface Edges. Just run your finger along the edge of the top plate and you will find a smooth finished surface.
Rigid Gauge Steel. Rigid gauge built for durability and long life in mind, but still light and handy.
Powder-Coat Finish – Smooth, Shiny, Scratch-Resistant, Beautiful. Looks Like It Was Just Waxed
Quality Packaging – Carefully Shrink Wrapped With Cardboard Backing To Prevent Damage In Shipment
Easy Unrestricted Air Flow For Your HVAC System
How To Measure A Grille
Overall Size:
Measure the size of the air duct/drywall opening. Do not measure the overall size of the register itself, only measure the “hole” in the wall/duct. Every grille has a front end frame, that will overlap at wall joint.
Total outer size of this grille is; listed size +1.75″.
Width vs Height
The first number in a grille size, represents the width, the second number represents the height. Example: If your hole is 20″ wide by 14″ tall, order a 20×14. If your hole is 14″ wide by 20″ tall, order a 14×20.
10 x 10 (in) HVAC Vent Cover – 4 WAY SUPPLY GRILLE – DUCT COVER & DIFFUSER – LOW NOISE – For Ceiling – With Opposing Damper Blades [Outer Dimensions: 13" Width, 13" Height]
- 10″ X 10″ Is The Size For The Duct Opening Measurement Only, Actual Front End Outer Dimensions Are 13″ Width X 13″ Height
- High Quality Aluminum Construction, No Scuff Powder-Coat Durable Finish, Smooth, Shiny, Scratch-Resistant, Recessed Screw Holes with Screws Included, Screws Same Color As Vent Cover, EASY INSTALLATION
- LOUVERED Extruded Ceiling Diffuser, Easy Opening and Closing Back Dampers For Better Airflow Control, Quiet and Smooth Control Lever, Noise Free Components
- Smooth Surface Edges – Run Your Fingers Across The Surface To Feel The Smoothness
- QUALITY PACKAGING – Carefully Shrink Wrapped With Cardboard Backing To Prevent Damage In Shipment – Hand Inspected for Quality
HVAC Premium has been providing superior in quality service for many many years. Our products are second to none, and we’ve helped numerous contractors, DIY projects,
and home improvement remodeling specialists complete their masterpiece. If you are looking for a top of the line unit to enhance your project look no further than HVAC Premium.
We have the largest selection of Grilles Registers & Diffusers.
HVAC Premium has sold over 5,000,000 Grilles – We are proud of our many happy customers!
10″ X 10″ Is The Size For The Duct Opening Measurement Only, Actual Front End Outer Dimensions Are 13″ Width X 13″ Height – SEE BELOW IN DESCRIPTION HOW TO MEASURE A GRILLE
SEE BELOW IN DESCRIPTION HOW TO MEASURE A GRILLE
How To Measure A Register Grille:
Overall Size: MEASURE the size of the DUCT OPENING. Do not measure the old vent cover. If your duct opening is 14″ wide by 20″ tall, order a 14×20.
Height vs Width
The first number in a register grille size represents the width, the second number represents the height.
Example: If your duct opening is 14″ wide by 20″ tall, order a 14×20.
This ceiling diffuser deflector vent cover will provide your home with ideal and quiet, rattle free airflow and ventilation for your air-conditioning and heating system
as well as smooth opening and closing back dampers. The back dampers are adjusted by the lever at the front of the register so that you can easily control the air flow
of your HVAC system. The installation is simple, just screw the grille on to
your wall with the screws that are included and that’s it!
100% Satisfaction Guaranteed
Don’t worry, you’re covered by our 100% moneyback guarantee no questions asked. Click Add to Cart Now! and enjoy a new updated refreshing look to your home.
Similar items with 4 stars and above
AC Infinity CLOUDLINE T4, Quiet 4” Inline Duct Fan with Temperature Humidity Controller – Ventilation Exhaust Fan for Heating Cooling Booster, Grow Tents, Hydroponics
- Designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors.
- Intelligent controller with temperature and humidity programming, fan speed control, timer, and alarm system.
- Mixed flow design combined with a PWM-controlled DC-motor for a truly quiet and energy efficient performance.
- Kit also includes corded sensor probe, AC power plug, two duct clamps, and required mounting hardware.
- Duct Size: 4” | Dimensions: 6.9 x 11.9 x 7.4 in. | Airflow: 205 CFM | Noise: 28 dBA | Bearings: Dual Ball
Inline Duct Booster Fan
A smart inline duct fan designed to quietly ventilate hydroponic grow rooms, boost heating/cooling to rooms, circulate fresh air, exhaust projects, and cool AV closets. Featuring an inline mixed-flow design, the duct fan can maintain airflow even in high static pressure applications. Contains an DC-motor with PWM-control for a quiet and energy efficient performance. Includes an intelligent controller that features advanced programming and functions. Complete kit includes one duct fan unit, one thermal controller, one corded thermal probe, two duct clamps, installation manual, all necessary mounting hardware, and a corded AC plug adapter.
Intelligent Controller
The controller can be programmed to adjust fan speeds to respond to varying high and low temperatures, and humidity. For ventilation applications, the controller can be set to run continuously, or triggered to run at customizable speeds when given power, due to its backup memory capability. Additional features includes a countdown timer, alarm system, and eco-mode. Includes detachable 12-foot precision water-resistant probe.
Quiet and Energy Efficient Design
Unlike common duct fans that uses an AC-motor which are loud and unmanageable, this duct fan features an DC-motor that is controlled using PWM (Pulse Width Modulation). This technology enables motors to be able to run smoothly at extremely low RPM speeds without generating additional heat or noise. In addition, the duct fan uses a mixed flow design using a stator blade and dual hydrodynamic wind circles. This gives it a high static pressure rating, enabling it to deliver airflow even in applications where air movement is being restricted. The motor houses dual ball bearings rated at 67,000 hours which allows the duct fan unit to be mounted in any direction. The unit is IP44 rated to be highly resistant to dust and liquids, and performs well even in harsh environments.
4" x 8" Return Air Grille – Sidewall and Ceiling – HVAC Vent Duct Cover Diffuser – [White] [Outer Dimensions: 5.75w X 9.75"h]
- 4″w X 8″h Is The Size For The Duct Opening Measurement Only, Actual Front End Outer Dimensions Are 5.75″ Width X 9.75″ Height – SEE IN DESCRIPTION HOW TO MEASURE A GRILLE PROPERLY
- High Quality Solid Stamped steel with Counter-Sunk Screw Holes (Screws Included) and No Sharp Edges
- Carefully Shrink Wrapped With Cardboard Backing To Prevent Damage In Shipment
- Easy Unrestricted Air Flow For Your HVAC System – 50° angled to provide maximum airflow
- Powder-Coat Finish – Smooth, Shiny, Scratch-Resistant, Beautiful. Looks Like It Was Just Waxed
4″ x 8″ Return Air Grille – Sidewall and Cieling – HVAC Vent Duct Cover Diffuser – [White]
4″w X 8″h Is The Size For The Duct Opening Measurement Only, Actual Front End Outer Dimensions Are 5.75″ Width X 9.75″ Height – SEE IN DESCRIPTION HOW TO MEASURE A GRILLE PROPERLY
Why HVAC Premium?
You may think of grilles and registers as a generic component of the ventilation system in your house. But they are also the most visible representation of you air system.
With HVAC Premium you get an extra measure of quality that will be visible to your family members and house guests.
Every part is hand inspected for quality before it is packaged, no exceptions.
No Sharp Surface Edges. Just run your finger along the edge of the top plate and you will find a smooth finished surface.
Heavy Gauge Steel. Heavier gauge than needed, built for durability and long life in mind, but still light and handy.
Powder-Coat Finish – Smooth, Shiny, Scratch-Resistant, Beautiful. Looks Like It Was Just Waxed
How To Measure A Grille
Overall Size:
Measure the size of the air duct/drywall opening. Do not measure the overall size of the register itself, only measure the “hole” in the wall/duct. Every grille has a front end frame, that will overlap at wall joint.
Total outer size of this grille is; listed size +1.75″.
Width vs Height
The first number in a grille size, represents the width, the second number represents the height. Example: If your hole is 20″ wide by 14″ tall, order a 20×14. If your hole is 14″ wide by 20″ tall, order a 14×20.
100% Satisfaction Guaranteed
Don’t worry, you’re covered by our 100% Money Back Guarantee, no questions asked. Click Add to Cart now & enjoy a new updated refreshing look of your room.
Similar items with 4 stars and above
10"w x 6"h 1-Way Fixed Curved Blade AIR Supply Diffuser – Vent Duct Cover – Grille Register – Sidewall or Ceiling – High Airflow – White
- 10″w X 6″h Is The Size For The Duct Opening Measurement Only, Actual Front End Outer Dimensions Are 11.75″ Width X 7.75″ Height – SEE BELOW IN DESCRIPTION HOW TO MEASURE A GRILLE
- Multi-Shutter Damper With Handle Operator – Screws Included
- Quality Packaging – Carefully Shrink Wrapped With Cardboard Backing To Prevent Damage In Shipment
- Carefully Shrink Wrapped With Cardboard Backing To Prevent Damage In Shipment
- Easy Unrestricted Air Flow For Your HVAC System
10″w X 6″h 1-Way FIXED CURVED BLADE AIR SUPPLY DIFFUSER – Vent Duct Cover – Grille Register – Sidewall or Cieling – High Airflow – White
10″w X 6″h Is The Size For The Duct Opening Measurement Only, Actual Front End Outer Dimensions Are 11.75″ Width X 7.75″ Height – SEE BELOW IN DESCRIPTION HOW TO MEASURE A GRILLE
You may think of grilles and registers as a generic component of the ventilation system in your house. But they are also the most visible representation of you air system.
These grilles and registers give you an extra measure of quality that are visible to your family members and house guests.
High Standard
Every part is hand inspected for quality before it is packaged, no exceptions.
No Sharp Surface Edges. Just run your finger along the edge of the top plate and you will find a smooth finished surface.
Rigid Gauge Steel. Rigid gauge built for durability and long life in mind, but still light and handy.
Powder-Coat Finish – Smooth, Shiny, Scratch-Resistant, Beautiful. Looks Like It Was Just Waxed
Quality Packaging – Carefully Shrink Wrapped With Cardboard Backing To Prevent Damage In Shipment
Easy Unrestricted Air Flow For Your HVAC System
How To Measure A Grille
Overall Size:
Measure the size of the air duct/drywall opening. Do not measure the overall size of the register itself, only measure the “hole” in the wall/duct. Every grille has a front end frame, that will overlap at wall joint.
Total outer size of this grille is; listed size +1.75″.
Width vs Height
The first number in a grille size, represents the width, the second number represents the height. Example: If your hole is 20″ wide by 14″ tall, order a 20×14. If your hole is 14″ wide by 20″ tall, order a 14×20.
8"w X 4"h 3-Way Aluminum Curved Blade Adjustable Air Supply HVAC Diffuser – Full Control Vertical/Horizontal Airflow Direction – Vent Duct Cover [Outer Dimensions: 9.65"w X 5.65"h]
- 8″w X 4″h Is The Size For The Duct Opening Measurement Only, Actual Front End Outer Dimensions Are 9.65″ Width X 5.65″ Height – SEE BELOW IN DESCRIPTION HOW TO MEASURE A GRILLE
- Never Rust – High Quality Rigid Aluminum
- 3-Way Adjustable Louvers – Full Control Vertical/Horizontal Airflow Direction
- Rigid Design – Noise Free Components – No Vibrating Louvers Etc.
- Powder-Coat Finish – Smooth, Shiny, Scratch-Resistant, Beautiful. Looks Like It Was Just Waxed
8″w X 4″h 3-Way Aluminum Curved Blade Adjustable Air Supply HVAC Diffuser – Full Control Vertical/Horizontal Airflow Direction – Wide Front End Overlap – Vent Duct Cover [Outer Dimensions: 9.65″w X 5.65″h]
8″w X 4″h Is The Size For The Duct Opening Measurement Only, Actual Front End Outer Dimensions Are 9.65″ Width X 5.65″ Height – SEE BELOW IN DESCRIPTION HOW TO MEASURE A GRILLE
Wide Front End Overlap – 1.65″ Inches.
Never Rust – Our high quality rigid aluminum is the longes lasting filter grille on the market. It will never rust, and will be easy to clean. The rigid Aluminum will keep its shape as in brand new condition.
Rigid Design – Noise Free Components – No Vibrating Louvers Etc.
Elegance – Beautifully Strutured To Add A Touch Of Upper Class To You Room And HVAC system.
Powder-Coat Finish – Smooth, Shiny, Scratch-Resistant, Beautiful. Looks Like It Was Just Waxed.
Quality Packaging – Carefully Shrink Wrapped With Cardboard Backing To Prevent Damage In Shipment
Easy Unrestricted Air Flow For Your HVAC System
How To Measure A Grille
Overall Size:
Measure the size of the air duct/drywall opening. Do not measure the overall size of the register itself, only measure the “hole” in the wall/duct. Every grille has a front end frame, that will overlap at wall joint.
Total outer size of this grille is; listed size +2.5″.
Width vs Height
The first number in a grille size, represents the width, the second number represents the height. Example: If your hole is 20″ wide by 14″ tall, order a 20×14. If your hole is 14″ wide by 20″ tall, order a 14×20.
Similar items with 4 stars and above
Conclusion
By our suggestions above, we hope that you can found vent accessories for heating ducts for you.Please don’t forget to share your experience by comment in this post. Thank you!
