onceownedby 
Nowadays, there are so many products of wanhou duplicator i3 heating block in the market and you are wondering to choose a best one. You have searched for wanhou duplicator i3 heating block in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings wanhou duplicator i3 heating block which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
Micro Swiss All Metal Hotend with Slotted Cooling Block for Wanhao i3 w/.4mm Nozzle
- Fits: Wanhao i3, Monoprice Maker Select 3D Printer v2, Cocoon Create 3D Printer
- .4mm Nozzle Plated with HIGH LUBRICITY WEAR RESISTANT TwinClad XT Coating
- Kit Includes: Thermal Barrier Tube, Plated Nozzle and Slotted Cooling block
- Slotted Clamping system, No set screw to ding and damage thermal tube, Significantly better heat transfer
- Made in USA by Micro Swiss
This is Micro Swiss All Metal Hotend kit with redesigned cooling block for Wanhao i3 with the following improvements: Micro Swiss All Metal Hotend Kit Features: All metal hotend upgrade for MK10 style extruders. This upgrade includes a modified thermal barrier tube and modified nozzle with modified cooling block. Thermal barrier tube is made from 2 different materials. The lower thermal break is made from stainless steel, and the colder upper part is made from aluminum. Stainless steel was used for thermal break because it offers low thermal conductivity, and aluminum was used for the upper portion because it has a lot better thermal conductivity, to carry away any heat from the filament. All metal hotend will let you print at much higher temperature then possible with original PTFE lined one. Another benefit of an all metal hotend design is more consistent melt chamber control. During slow extrusion rate, in PTFE lined hotend, transition zone from solid to molten plastic tends to creep upward creating more stringy prints. With all metal design a transition zone is always constant, being located right at the heat break. With fast extrusion rate, PTFE tube doesn’t have enough thermal conductivity to properly melt all the plastic coming out. On MK10 extruders that limitation happens around 60 mm/s, depending on nozzle size. All metal hotend solves this problem, plastic is surrounded by thermally conductive nozzle throughout its length. STEP BY STEP INSTALLATION INSTRUCTION https://store.micro-swiss.com/pages/micro-swiss-all-metal-hotend
[Gulfcoast Robotics] Hotend Heater Block and HEX thermistor Upgrade kit for MK10 Extruder, fits MP Maker Select Duplicator i3 V2.1 and Plus
MK10 heater block + thermistor kit is for extruder with thermistor only. Block has M3x0.5 tapped hole to accept included thermistor.
HEX M3 stud thermistor is drop-in replacement for OEM thermistor installed on your 3D Printer. It does not require any changes in the firmware.
Compatibility:
Maker Select V2.1, PLUS
Wanhao Duplicator V2.1, PLUS
Similar to Duplicator i3 3D printer clones with MK10 extruder
NTC 3950 HEX thermistor features:
M3x0.5 threaded stud to use in place of M3 clamping screw on MK10 extruder heater block
Wiring insulation: fiberglass
Wiring length: 130mm
Connector type: JST XHP
Package contents:
1 x MK10 Heater block, M7x1 threaded with M3x0.5 tapped hole for thermistor clamping screw
1 x HEX M3 stud thermstor based on NTC3950
1 x Silicone insulation ring
[Gulfcoast Robotics] 2 PCS MK10 Extruder Hotend Heater Block fits MP Maker Select Duplicator i3 3D Printer – Made by US company with quality and precision.
[Gulfcoast Robotics] Thermistor Upgrade for Maker Select Plus and Wanhao Duplicator i3 Plus 3D Printers.
- Drop-in replacement for stock thermistor on MP Maker Select Plus / Wanhao Duplicator Plus
- Also compatible with MP Maker Select V2.1 and Wanhao Duplicator V2.1
- Easy to mount with M3 HEX STUB
- Can hold temperature up to 300C with ceramic glue and fiberglass insulation on leads
- Designed and manufactured by USA Company
Our thermistor can replace stock thermistor in Duplicator i3 / Maker Select V1, V2, V2.1 and Plus 3D Printers. Thermistor assembled with 600C rated ceramic glue and fiberglass insulation wires. Wiring insulation can withstand much higher heat than stock PTFE insulated thermistor, it will result in longer service life and you also can print more different materials on your printer without damaging thermistor.
NTC 3950 HEX thermistor features:
M3x0.5 threaded stud to use in place of M2 clamping screw on MK10 extruder heater block.
Wiring insulation: fiberglass.
Wiring length: 130mm.
Connector type: JST XHP.
NTC 100K thermistor 3950K beta A value.
Use TEMP SENSOR number 11 in Marlin.
High accuracy: 1%.
Resistance value at 25°C=100K
Package contents:
1 x HEX stud NTC 3950 100k Thermistor for Wanhao / Maker Select.
Abn Automotive Electric Silicone Heating Pad, 4in x 5in 120V 150W – Waterproof High Heat Transfer Car Heated Wrap Mat
- KEEP ENGINE WARM: On a cold winter day, use the ABN Automotive Electric Silicone Heating Pad, 4” x 5” Inch 120V 150W – Waterproof High Heat Transfer Car Heated Wrap Mat 10 or 15 minutes prior to start up for perfect engine oil temperature
- Device heats the oil quickly for those cold start mornings
- IMPROVE OIL FLOW: Transmits heat continuously to keep engine oil as a thin fluid, giving you instant lubrication when starting your engine
- Reduces wear and tear
- Increases engine longevity and extends transmission life
- EASY TO INSTALL: Clean application surface, peel off paper backing to adhesively attach 4-inch x 5-inch (10.2cm x 12.7cm) pad to outside of clean oil pan or other metal surface, then plug the 72-inch (183cm) 2-prong power cord into any wall outlet for instant warming
- Once applied, the pad remains permanently installed on any metal surface (seal edges for longer adherence
- sealant not included)
- BUILT TO LAST: Constructed with silicone coat covering for oil resistance, acid resistance, and added strength and longevity
- VARIOUS WARMING APPLICATIONS: Designed to heat fluids with any metal surface such as engine oil pan, fuel tank, reservoir, transmission pan, and more
- For metal surfaces only – Keep away from plastics
- Caution – Extremely hot, use thermostat (not included) to regulate temperature
- Recommended for automotive applications – Not for personal use
Benchmark Scientific BSW50 Aluminum Dry Bath Heating Block for Digital Dry Bath Incubator, 5 x 50mL Centrifuge Tubes Capacity
Conclusion
By our suggestions above, we hope that you can found wanhou duplicator i3 heating block for you.Please don’t forget to share your experience by comment in this post. Thank you!
