Which Is The Best Gtx 1050 Cooling Block

Do you hate the graphics card fever? Yes? This product can effectively solve your problem!
Water Cooling System! A great accessory for your computer chassis, deals with any heat problems.
– A powerful water pump is enabled. It takes heat away much more quickly, but you don’t need to worry about leakage.
– Sometimes, the water pump is not enough for heat dissipation, so we get you an auxiliary fan, which helps to reduce heat more effectively.
– Easy to install, suitable for 58.4×58.4mm or 53.3×53.3mm buckle, which make it fit many kinds of graphic cards, for example, GTX960/980/980Ti/1050/1060/1070/1070Ti, AMD R390/290/280 or other similar cards.

Warm Tips
1. Please make sure that you know how to use BIOS before buying it.
2. Please check that if your computer chassis support 120mm water cooling system before purchase.
3. The interface of the auxiliary fan is 4pin, please connect it to the CPU Fan interface of the motherboard, and set it up in BIOS.

Fan Specifications:
Fan speed: 700-1500RPM
Air volume: 62CFM
Noise: 18.0-26.4dB (A)
Connector: 4Pin (2510)
Start-up voltage: DC 7V
Rated voltage: DC 12V
Rated current: 0.18A
Rated power: 2.16W
Size: 120X120X25mm/4.72X4.72X0.98″

Pump Specifications:
Pump speed: 2000 RPM
Pump head: 1.2m H2O
Cold liquid flow rate: 96L/H
Noise: 25.0dB (A)
Connector: SATA
Rated voltage: DC 12V
Rated current: 0.25A
Rated power: 3W
Cold Head Size: 65×32.5mm/2.56×1.28″
Cold Plate size: 154x120x27mm/6.06×4.72×1.06″
Pipe length: 315mm/12.4″

Notes:
* Please follow the user manual strictly and carefully.

Package included:
1 X GPU Cooling System
1 X Installation Kit
1 X User Manual

The Thermosphere cooling engine uses similar, yet refined as per needs of modern microprocessors, fin design as its ancestor. The cooling liquid accelerates through jet plate’s nozzle and turbulently continues its path through numerous very thin channels which provide extreme cooling surface area. EK-Thermosphere can also work flawlessly with reversed water flow which does not affect the cooling performance. Base is made of nickel plated electrolytic copper, backbone is made from laser cut brushed stainless steel plate while the top is made of quality cast acrylic material. The sealing is ensured by quality rubber washers. Screw-in brass standoffs are pre-installed in each exchangeable mounting plate and allow for safe, painless installation procedure. Block is mounted with enclosed M3x4 DIN7985 screws. G1/4″ threaded fittings can be used on both sides of the FC terminal. Up to four EK-Thermosphere water blocks can be used on a single ATX form factor motherboard by using EK-FC Terminal (DUAL, TRIPLE or QUAD type) system or other means of interconnectivity. Please note that EK-FC Bridge & Link system is not compatible with this water block. GPU compatibility: EK-Thermosphere series waterblocks supports majority of modern nVidia and AMD high-end graphics cards via exchangeable mounting plates. The product however comes factory pre-fitted with mounting plate G80 (mounting pattern 58x58mm) and ready for use on modern nVidia GeForce GTX graphics cards only. Please check compatibility at EK’s CoolingConfigurator. To use this product on AMD and other nVidia graphics cards it is mandatory to purchase additional mounting plates: – G92: 53x53mm – R600: 54x54mm – GF560: 51x61mm – G200: 61x61mm Enclosed in the box: – EK-Thermosphere series water block /w pre-installed G80 mounting plate – mounting mechanism – thermal grease (TIM) EK-Ectotherm (1g)

1. Block with 0.5mm micro channel injection design, all designed only for performance!
2. Block using large flow design, even if low raise pump can use it.
3. Block made by high purity copper, and electroplating to prevent oxidation and makes beautiful.
4. Inlet and outlet can change direction free.
Tips:
1. Please double check the graphics card detail model to ensure compatibility. Please feel free to contact us if you are not very sure.
2.2pcs G1/4 3/8″ ID 1/2″ OD Silver Compression Fittings are included, instead of the ones in the pictures.
3. Prohibit the use of alcohol containing coolant.
4. Graphics card block installation requires a certain skill and experience, because the graphics card manufacturing tolerances may have a certain impact on the block installation, we can assist buyers to solve such problems, but this can not be the basis of returns.
Compatibilities: EVGA RTX2080TI FTW3

The Thermosphere cooling engine uses similar, yet refined as per needs of modern microprocessors, fin design as its ancestor. The cooling liquid accelerates through jet plate’s nozzle and turbulently continues its path through numerous very thin channels which provide extreme cooling surface area. EK-Thermosphere can also work flawlessly with reversed water flow which does not affect the cooling performance. Base is made of nickel plated electrolytic copper, backbone is made from laser cut brushed stainless steel plate while the top is made of quality cast acrylic material. The sealing is ensured by quality rubber washers. The top also features two pre-drilled slots for 3mm LED diodes. Screw-in brass standoffs are pre-installed in each exchangeable mounting plate and allow for safe, painless installation procedure. Block is mounted with enclosed M3x4 DIN7985 screws. G1/4″ threaded fittings can be used on both sides of the FC terminal. Up to four EK-Thermosphere water blocks can be used on a single ATX form factor motherboard by using EK-FC Terminal (DUAL, TRIPLE or QUAD type) system or other means of interconnectivity. Please note that EK-FC Bridge & Link system is not compatible with this water block. GPU compatibility: EK-Thermosphere series waterblocks supports majority of modern nVidia and AMD high-end graphics cards via exchangeable mounting plates. The product however comes factory pre-fitted with mounting plate G80 (mounting pattern 58x58mm) and ready for use on modern nVidia GeForce GTX graphics cards only. Please check compatibility at EK’s CoolingConfigurator. To use this product on AMD and other nVidia graphics cards it is mandatory to purchase additional mounting plates: – G92: 53x53mm – R600: 54x54mm – GF560: 51x61mm – G200: 61x61mm Enclosed in the box: – EK-Thermosphere series water block /w pre-installed G80 mounting plate – mounting mechanism – thermal grease (TIM) EK-Ectotherm (1g)

100% new, fine workmanship, simple sense is very strong!
N-AS1050SI-X built for ASUS GTX1050 GTX1050TI Specifications of the graphics design ,please confirm before buying graphics specific specifications, to ensure the compatibility of water cooling block.
Water cooling block directly to the cooling core graphics (GPU), memory (RAM), as well as the graphics card power supply (VRM) these hot key parts of the graphics card, to ensure that the players and the stability of the overclocking, maintain a good temperature
Video card water head is designed using large flow, even if hm weaker pump can meet the demand
Water ccoling block at the bottom of the use of high purity copper manufacturing, and electroplating processing to prevent oxidation, more make water head of delicate and beautiful. Cover the use of high-quality POM material or imported acrylic materials, ensure the service life of water head and durability. Sealing material using a high standard of sealing ring resistance to ageing of fatigue, ensure the sealing water cooling block.
Video card water head is free to change direction, convenient players form a SLI system, can be in series or in parallel
parts list:
fast twist X 2
plugs X 2
thermal paste X 1
mounting screws X1
Compatible model:
RGB LED X 1
Compatible graphics card type:ASUS DUAL-GTX 1050-2G
Compatible graphics card type:ASUS DUAL-GTX 1050TI-4G
Compatible graphics card type:ASUS EX-GTX 1050-2G
NOTE: If you are unsure whether compatible, please contact the seller or view graphics brands and models, because the description have mentioned writing compatible graphics card name and model number .

Acer Spin 5 SP513-52N-85DC comes with these high level specs: 8th Generation Intel Core i7-8550U Processor 1.8GHz with Turbo Boost Technology up to 4.0GHz, Windows 10 Home, 13.3″ Full HD (1920 x 1080) widescreen LED-backlit IPS display, Multi-touch screen, supporting 10 finger touch, Intel UHD Graphics 620, 8GB DDR4 Memory, 256GB SSD, Secure Digital (SD) card reader, Acer True Harmony, Two Built-in Stereo Speakers, 802.11ac Wi-Fi featuring 2×2 MIMO technology (Dual-Band 2.4GHz and 5GHz), Bluetooth 4.1, HD Webcam (1280 x 720) supporting High Dynamic Range (HDR), Acer Fingerprint Reader supporting Windows Hello, 1 – USB 3.1 Type C Gen 1 port (up to 5 Gbps), DisplayPort over USB-C, 2 – USB 3.0 ports ( one with power-off charging), 1 – USB 2.0 port, 1 – HDMI Port with HDCP support, 3-cell Li-Ion Battery (4810 mAh), Up to 13-hours Battery Life, 3.31 lbs. | 1.5 kg (system unit only) (NX.GR7AA.001).

The GeForce GTX 1060 graphics card is loaded with innovative new gaming technologies, making it the perfect choice for the latest high-definition games. Powered by NVIDIA Pascal – the most advanced GPU architecture ever created-the GeForce GTX 1060 delivers brilliant performance that opens the door to virtual reality and beyond.

Access portability and supreme graphics power as your laptop turn in a professional workstation with the ASUS XG Station Pro external graphics card dock via Thunderbolt 3. The ASUS XG Station Pro has superior cooling with 120mm exhaust fans and reduces noise output to 0dB during light loads.

Operation System: Windows 7 or later (depends on the product) with the MULTI – GPU TECHNOLOGY – SLI , 2-Way

Conclusion

By our suggestions above, we hope that you can found gtx 1050 cooling block for you.Please don’t forget to share your experience by comment in this post. Thank you!