Which Is The Best Biocide Water Cooling

As with all of PrimoChill’s high performance cooling system fluids and additives, Liquid Utopia is safe, non toxic, and biodegradable. Liquid Utopia is the only single use additive available in today’s market that provides a broad spectrum of coverage and has the ability to be dyed to your color choice by adding a PrimoChill Intensifier(sold separately). No matter which of the twelve colors you choose, PrimoChill’s Liquid Utopia makes life easy for you, and short for Algae and Corrosion.

********DO NOT MIX WITH THE PRE MIXED PC ICE OR PC PURE********
Warnings/Cautions: * Liquid Utopia is made with earth friendly ingredients and carries a broad spectrum of anti-microbial agents. If you notice white sediment in your loop, it is most likely Liquid Utopia has been hard at work! White sediment may be present for some time, depending on the amount of existing contaminants. Do not mix with any pre-mixed coolants as it will over saturate the inhibitors, this includes Silver Coils as they act as a antimicrobial component.
Tyler Direct is not responsible for any hardware damage. Use at your own risk.

EC6 Protect – Biocide is a highly effective slow release, long life biocide. Simply add to de-ionised water, purified water, or coolant for years of protection against bacterial growth and algae. EC6 Protect can be used in new system to protect against biological growth, or added to an existing system to neutralise bacteria an algae.

• Highly Effective Biocide
• Slow Release and Long Life
• Non-corrosive
• Low Odour
• Non-Foaming
• Low viscosity

Mix with water at a ratio of 6ml per litre. One bottle will treat 5 litres of water.

Do not mix in a higher than recommended ratio. EC6 Coolants already contain EC6 Protect Biocide.

Model: 5060175589613

Once placed in the water the silver will require 7-10 days to become effective.

Primochill Sys Prep was created to address the immense customer requests for a clean and well maintained cooling system. Any successful venture into water-cooling starts with a true cooling loop preparation which can only be achieved by using Sys Prep.
Specifications

Compatibility: Sysprep is compatible with rigid and flexible tubing of all sizes.  It is safe to use on rubber, plastics and acrylics so rest assured all your seals, o-rings, reservoirs and such are all safe!
Instructions
1.Install your cooling loop and double-check connections to ensure loop is “closed”. No Leaks!
2.Empty bottle of SysPrep into 1 US Gallon of fresh DI or Distilled water, and shake for 30 seconds
3.Add mix to cooling loop.
4.Fill loop with treated water and be sure to remove as many air bubbles as possible.
5.Start loop pump and begin circulating the treated water.
6.Run treated water for at least 12 to 24 hours to ensure loop is properly flushed and treated.  While using for longer periods of time doesn’t have negative effects, Sysprep is not an effective final coolant and should be replaced with coolant before any extended use of computer.
7.Drain System. Inspect drained water for debris or foreign particles. Dispose of drained water. Repeat flush if needed.
8.Fill loop with your choice of coolant and begin water-cooling.**

** Residual treated water left in your loop is not harmful. If you prefer to remove it, do a simple rinse of the loop with fresh DI or Distilled Water. This rinse will not affect the results of the Sys Prep just performed.

Warnings:Do not mix with any pre-mixed coolants as it will over saturate the inhibitors.
PrimoChill is not responsible for any hardware damage. Use at your own risk.

XSPC Antimicrobial Silver Coils help to inhibit bacterial growth and algae when added to your watercooling loop. XSPC Silver Coil are made in the UK from 99.999% pure silver.

• Ribbon Dimensions: 75 x 3 x 0.5 mm
• Coiled Dimensions: 20 x 10mm
• Surface Area: 500mm square
• Weight: 1.3g
• Material: 0.999 Fine Silver

Model: 5060596650626

The PrimoChill Rad Clean – Radiator Cleaning Treatment is a solution for cleaning radiators outside of a loop. By using this cleaner you can “”scrub”” the inside of your rad without fear of damaging other components, seals or acrylic! This solution is easy to mix, easy to use, and gets you ready to go!
Specifications

Compatibility
Rad Clean is compatible with the internal metals found in radiators only! Using Rad Clean on nickel items is NOT compatible!
Instructions
For this pre-treatment to work correctly follow the instructions below. 
Step 1: Dilute one half bottle of RadClean into 32oz of distilled/Ro/Di water.
Step 2: Fill radiator up with Radclean mixture
Step 3:Close both ports with plastic fillports. Ensure they’re plastic. Shake radiator.
Step 4:Let your radiator sit for one hour.
Step 5:Drain radiator and flush radiator extensively with distilled/ro/di water
Step 6:Drain radiator and let dry completely.
Warnings
Important to use plastic fittings when cleaning radiators while using Rad Clean! PrimoChill is not responsible for any hardware damage. Use at your own risk.

Now making custom bends with rigid tubing could not be easier. With the PrimoChill Rigid Tubing 45/90/180 Degree Bending Kit – 1/2 in. OD you can make consistent bends every time!  Once your tube is heated (PETG or Acrylic) you can mold the tube using this bending tool for angles of any size.  These tool has mount holes that allow you to mount to a hard surface for a more permanent work station.
Features

Specifications
Compatibility

Parts Included

Warnings
Practice using the bending tool on some scrap rigid until you get the hang of how best to use it!
PrimoChill is not responsible for any damage caused by or when using this product. Please use at your own risk.

Introducing the next level in PC liquid cooling, the Thermaltake C1000 Opaque Vivid Color Coolant Series. Made in Germany, the C1000 Opaque coolants are a non-transparent, virtually odorless, biodegradable, high performance PC liquid. Offering ideal protection for PC cooling systems using copper, nickel, brass or aluminum materials, the C1000 also supports anti-rust, anti-freezing and water scale prevention. Take control of colorizing any system from seven vivid colors: red, green, blue, orange, yellow, white, and purple to brighten up any build with Thermaltake.

Conclusion

By our suggestions above, we hope that you can found biocide water cooling for you.Please don’t forget to share your experience by comment in this post. Thank you!