onceownedby 
Nowadays, there are so many products of water cooling hard tube 16mm in the market and you are wondering to choose a best one. You have searched for water cooling hard tube 16mm in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings water cooling hard tube 16mm which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
Thermaltake Pacific DIY OD 16mm (5/8") x ID 12mm (1/2") Water Cooling PETG Hard Tube Bending Kit CL-W093-AL00BL-A
- Near Perfect Bends: Essential for making precise bends when using 16mm OD PETG tube
- Mandrels: Includes Mandrels for 45/90/180/360 degree bends
- Pipe Cutter: Professional Grade Pip Cutter provides perfect beveled edge cuts
- Insert: Silicone Tube insert prevents kinks and help promote smooth bends while keeping inner wall diameter
- Mounting: Pre-drilled holes allow easy mounting of mandrels to flat surface
- Recommended use of soapy water assists with tube insertion and tube heating
- Warranty: 2 Years
Thermaltake Pacific Black 4 Build-in O-Rings C-Pro G1/4 PETG 16mm OD Compression Fitting 6 Pack CL-W214-CU00BL-B
- Fitment Reimagined: This new concept makes it easier than ever to install custom hard tube liquid cooling loops
- Four Built in O rings: Maximum leak prevention, secure compression seal, and peace of mind
- Protection You Expect: Surface treated and a special coating finish provides increased durability and protection from corrosion
- Build It Your Way: Compatible with liquid cooling components that utilize G1/4 thread ports and 16mm OD PETG, Acrylic, and Copper hard tubing
- Exclusively Designed Open End Wrench is Included
The Pacific C-Pro Series is a revolution in fitment design. It simplifies the process of setting up a custom liquid-cooling loop and provides a seal that outperforms traditional compression fittings. By using 4 preinstalled O-rings and an overhauled design, the C-Pro Series is the new standard in fitment technology and it is exclusive to Thermaltake.
P/N: CL-W214-CU00BL-B
Model: Pacific C-Pro G1/4 PETG 16mm OD 6 Pack – Black
Dimension: D26 x 21 (H) (mm)
Applicable: OD : 16 mm
Weight : 320 g
Material: CU + AL
Screw Thread: G 1/4
Note: PETG Tube to G1/4
Similar items with 4 stars and above
Bykski Rigid Tubing 45/90/180 Degree Bending Kit – 16mm OD
Now making custom bends with rigid tubing could not be easier. With the Bykski Rigid Tubing 45/90/180 Degree Bending Kit – 16mm OD you can make consistent bends every time! Once your tube is heated (PETG or Acrylic) you can mold the tube using this bending tool for angles of any size. These tools have mount holes that allow you to mount to a hard surface for a more permanent work station.
Features
Specifications Compatibility
Parts Included
WarningsPractice using the bending tool on some scrap rigid until you get the hang of how best to use it!
Tyler Direct is not responsible for any damage caused by or when using this product. Please use at your own risk.
EKWB EK-HD PETG Tube, 12/16mm, 500mm, Clear, 8-Pack
EK-HD PETG Tube is solid type PETG tubing intended for use with EK-HD push-in adapters and EK-HDC series compression fittings. The tubing may be heat treated to achieve certain bends. For expert users only! It is mandatory to chamfer the edges of freshly cut tube in order to prevent gasket (O-ring) damage. EK recommends a 0.5mm x 45° chamfer.
Model: TR-3831109841402-8P
Barrow ABS 16MM Hard Tube Bending Kit, Black
Barrow ABS 16MM Hard Tube Bending Kit, Black
Model: AWGM3-16
Bykski 12mm ID x 16mm OD Rigid PETG Tube – 4X 750mm – Clear
Using metric size fittings? The Bykski PETG tubing is crystal clear and easy to work with. Sold as a 4 pack , each stick is 750mm long giving you plenty to outfit your entire system!
Secondary pictures shows 3 metric sizes for reference.
Specifications
Compatibility
Parts Included
Warnings
With the use of different components, materials, fluids, and flow rates, results may vary with the appearance of your tubing. Rigid PETG Tube is designed to work with a large variety of cooling components, however the use of alcohols, Ethylene Glycol and as well as any other harmful chemicals is strictly prohibited and will void your warranty. Tyler Direct is not responsible for any damage caused by or when using this product. Please use at your own risk.
XSPC Easy Cut & Bend Toolkit for XSPC PETG Tubing
- Heavy Duty Hose Cutter – The heavy duty cutter can cut through PETG tubing as effortlessly as you would cut flexible PVC tubing. Easily cut PETG rigid tubing without the need for a saw.
- PETG Easy Bending Tool – This tool allows you to easily bend PETG tubing at an angle between 0 and 180 degrees. Just heat the tubing with the bending rubber inserted, insert the tube into the tool and bend it to the required radius. This simple tool takes the guess work and difficulty out of bending rigid tube. (Suitable for 12-14mm outer diameter tubing)
- Bending Rubber – Solid rubber extrusion for bending PETG tubing. Insert into the tube before bending, to stop the PETG tube kinking, or deforming. (Bending rubber diameter is 10mm)
- PETG Chamfer Tool – Quickly chamfer the edges of PETG tubing by using this handy tool. Just insert the tubing and turn anticlockwise.
- PETG Edging Sandpaper – Ideal for sanding the edges of PETG tubing, after using a chamfer tool.
XSPC PETG Tool Kit to bend and cut PETG tubing.Includes Heavy Duty Hose Cutter, PETG Easy Bending Tool, Bending Rubber, PETG Chamfer Tool, and PETG Edging Sandpaper.For use with XSPC branded PETG tubing.May not be compatible with other branded PETG products.
EKWB EK-HD PETG Tube, 10/12mm, 500mm, Clear, 4-Pack
EK-HD PETG Tube is solid type PETG tubing intended for use with EK-HD push-in adapters and EK-HDC series compression fittings. The tubing may be heat treated to achieve certain bends. For expert users only! It is mandatory to chamfer the edges of freshly cut tube in order to prevent gasket (O-ring) damage. EK recommends a 0.5mm x 45° chamfer.
Model: TR-3831109841396-4P
PrimoChill Rigid Tubing 45/90/180 Degree Water Cooling Bending Kit – 1/2 in. OD
Now making custom bends with rigid tubing could not be easier. With the PrimoChill Rigid Tubing 45/90/180 Degree Bending Kit – 1/2 in. OD you can make consistent bends every time! Once your tube is heated (PETG or Acrylic) you can mold the tube using this bending tool for angles of any size. These tool has mount holes that allow you to mount to a hard surface for a more permanent work station.
Features
Specifications Compatibility
Parts Included
WarningsPractice using the bending tool on some scrap rigid until you get the hang of how best to use it!
PrimoChill is not responsible for any damage caused by or when using this product. Please use at your own risk.
Conclusion
By our suggestions above, we hope that you can found water cooling hard tube 16mm for you.Please don’t forget to share your experience by comment in this post. Thank you!
