The 10 Best 3M Strength Red Lens Repair Film

Our 3M High Strength Lens Repair Film is a fast, simple method for repairing cracked and broken car and truck tail lights, signal lights and other automotive lenses. It features durable and flexible plastic film and a strong adhesive that adheres even around curved lens surfaces for a weatherproof, airtight seal. It’s available in three colors for fixing rear lights, turn signals and more.

Product Description

Creates a weatherproof seal.

Amazon.com

Quick and easy repair

3M High-Strength Lens Repair Film is a semi-permanent solution for broken tail lights and signal lights. The strong adhesive backing creates a waterproof seal, preventing further damage to the lens interior and electrical components. The flexible plastic adheres easily to flat or curved lens surfaces. For quick and easy repairs, simply cut the film to size, remove the adhesive liner, and apply to broken lens. This simple solution provides a long-lasting lens repair. 3M High-Strength Red Lens Repair Film fixes broken car and truck tail lights, turn signal lights, and other automotive lenses. The strong adhesive backing repairs cracked and broken tail lights with a weatherproof and airtight seal, helping prevent further damage to the lens interior and electrical components. The flexible plastic adheres easily to flat or curved lens surfaces on either rear lights or turn lights. For quick and easy repairs, simply cut the film to size, remove the adhesive liner, and apply to the broken automotive light lens. This simple solution provides a semi-permanent lens repair that is less expensive than replacement taillights or turn signal lenses.

1. Remove any loose pieces from the broken area of the lens. Clean the repair area using 3M Adhesive Remover (PN 03618).

2. The repair film should be cut large enough to overlap the repair by about 1/2 inch on all sides to ensure good adhesion of the film. Hold the repair film up to the damaged area and lightly trace the amount of film needed for the repair with a marker.

3. Using scissors cut the film to size. Hold the cut piece up to the damaged area before removing backing to ensure correct size. Note: For curved surfaces, before removing backing, roll and shape the film in your hands for 60 seconds. This will help form the film to the curve prior to installation.

4. Peel backing off repair film and center over damaged area.

5. Press firmly and evenly across all areas of the film to ensure good adhesion and prevent moisture and dirt from entering the lamp.

6. Done!

3M High-Strength Red Lens Repair Film fixes broken car and truck tail lights, turn signal lights, and other automotive lenses. The strong adhesive backing repairs cracked and broken tail lights with a weatherproof and airtight seal, helping prevent further damage to the lens interior and electrical components. The flexible plastic adheres easily to flat or curved lens surfaces on either rear lights or turn lights. For quick and easy repairs, simply cut the film to size, remove the adhesive liner, and apply to the broken automotive light lens. This simple solution provides a semi-permanent lens repair that is less expensive than replacement taillights or turn signal lenses. For anyone wondering how to fix a broken tail light, it is good to know that this automotive lens repair film is simple to use with basic how-to car repair skills. This easy to use lens repair film helps prevent expensive future damage caused by moisture and dust. Simply cut the film to size, remove the liner, and press the film in place to complete the repair. This simple repair requires no specialty tools to complete.

Key Benefits of High-Strength Lens Repair Film

• Flexible film repairs flat or curved truck and car tail lights and signal lights
• Weatherproof and airtight seal helps block rain, snow and dirt
• Quick and easy to use repair film is less expensive than replacement tail lights
• Strong adhesive backing resists loosening from taillights
• Also available in Red and Amber for both rear lights and turn signals

3M Lens Repair Tape provides temporary repairs of broken or cracked taillights, parking lights and side directional lights. Our tape applies smoothly and tightly holds with its 3M adhesive that ensures a strong bond. Lens repair tape is available in both red and amber to match the lens color.

Product Description

Creates a weatherproof seal.

Amazon.com

Quick and easy repair

3M High-Strength Lens Repair Film is a semi-permanent solution for broken tail lights and signal lights. The strong adhesive backing creates a waterproof seal, preventing further damage to the lens interior and electrical components. The flexible plastic adheres easily to flat or curved lens surfaces. For quick and easy repairs, simply cut the film to size, remove the adhesive liner, and apply to broken lens. This simple solution provides a long-lasting lens repair. 3M High-Strength Red Lens Repair Film fixes broken car and truck tail lights, turn signal lights, and other automotive lenses. The strong adhesive backing repairs cracked and broken tail lights with a weatherproof and airtight seal, helping prevent further damage to the lens interior and electrical components. The flexible plastic adheres easily to flat or curved lens surfaces on either rear lights or turn lights. For quick and easy repairs, simply cut the film to size, remove the adhesive liner, and apply to the broken automotive light lens. This simple solution provides a semi-permanent lens repair that is less expensive than replacement taillights or turn signal lenses.

1. Remove any loose pieces from the broken area of the lens. Clean the repair area using 3M Adhesive Remover (PN 03618).

2. The repair film should be cut large enough to overlap the repair by about 1/2 inch on all sides to ensure good adhesion of the film. Hold the repair film up to the damaged area and lightly trace the amount of film needed for the repair with a marker.

3. Using scissors cut the film to size. Hold the cut piece up to the damaged area before removing backing to ensure correct size. Note: For curved surfaces, before removing backing, roll and shape the film in your hands for 60 seconds. This will help form the film to the curve prior to installation.

4. Peel backing off repair film and center over damaged area.

5. Press firmly and evenly across all areas of the film to ensure good adhesion and prevent moisture and dirt from entering the lamp.

6. Done!

3M High-Strength Red Lens Repair Film fixes broken car and truck tail lights, turn signal lights, and other automotive lenses. The strong adhesive backing repairs cracked and broken tail lights with a weatherproof and airtight seal, helping prevent further damage to the lens interior and electrical components. The flexible plastic adheres easily to flat or curved lens surfaces on either rear lights or turn lights. For quick and easy repairs, simply cut the film to size, remove the adhesive liner, and apply to the broken automotive light lens. This simple solution provides a semi-permanent lens repair that is less expensive than replacement taillights or turn signal lenses. For anyone wondering how to fix a broken tail light, it is good to know that this automotive lens repair film is simple to use with basic how-to car repair skills. This easy to use lens repair film helps prevent expensive future damage caused by moisture and dust. Simply cut the film to size, remove the liner, and press the film in place to complete the repair. This simple repair requires no specialty tools to complete.

Key Benefits of High-Strength Lens Repair Film

• Flexible film repairs flat or curved truck and car tail lights and signal lights
• Weatherproof and airtight seal helps block rain, snow and dirt
• Quick and easy to use repair film is less expensive than replacement tail lights
• Strong adhesive backing resists loosening from taillights
• Also available in Red and Amber for both rear lights and turn signals

Repairs torn vinyl car covers and offers tight, water resistant seals on many surfaces.

Damage to headlights can escalate rapidly if not dealt with quickly, which is why you need the 3M Clear Headlight Repair Tape. This tape’s pressure activated adhesive sticks to headlights, covering cracks, chips and damage and goes on virtually invisible to prevent further damage from weather or road debris. This film is easily installed with pressure alone and doesn’t require any messy chemicals to install. This film will last years on your headlight without yellowing, cracking or disintegrating.

3M Contractor Grade Pro Strength Duct Tape is constructed of polyethylene film laminated to cloth with a rubber adhesive. This quality commercial-grade tape resists curling and tears off the roll cleanly for general applications in professional MRO/construction. Economically priced to best provide a medium-strength temporary solution for multipurpose duties, this tape is a strong choice for general everyday indoor duties where strength and moisture resistance are necessary. Can be used at temperatures as high as 200° F for up to 30 minutes.

Product Description

Constructed of polyethylene film laminated to cloth with a rubber adhesive, this economical tape resists curling and tears off the roll cleanly for easy application on stucco and other challenging, coated exteriors. 3M Outdoor Masking and Stucco Tape 5959 allows for permanent and temporary applications. It is removable with little or no adhesive residue up to three months after application.

From the Manufacturer

The adhesive on 3M Outdoor Masking and Stucco Tape 5959 is a special blend of natural and synthetic rubbers and removes cleanly from most opaque surfaces; making it ideal for construction, marine and other applications such as outdoor masking and stucco projects. Its construction is similar to that of an industrial-strength duct tape, making it useful for sealing, holding, bundling, identifying and protecting while its clean removal stands up to masking in tough coating applications. The smooth, red polyethylene backing is easy to identify and protects underlying surfaces from UV damage and abrasion.

Application Ideas

• Ideal for overspray protection when masking substrates from coatings such as stucco, EIFS, gel coat, and construction coatings
• Effective in marine applications where temporary tents are made to contain coating that is being removed or to protect coating being applied from dust and debris
• The tough polyethylene outer layer and strong scrim backing make one piece removal of the tape possible when pulling through heavy or extra strong coating
• Can be used on surfaces such as window and door frames to protect them from damage during construction
• Ideal for critical abatement applications where the surface must not be damaged or marred during the removal process
• Thick adhesive layer holds well to irregular surfaces such as sealed masonry or brick
• Excellent for temporary repairs and holding on the job

Masking tape was developed specifically to help protect surrounding surfaces from overspray, provide clean paint lines and remove easily when finished. These masking tapes adhere well, resist solvents or water from the paint, and are strong enough to hang plastic sheeting, yet remove cleanly without damaging the subsurface. The backing, typically crepe paper, can conform to curved and irregular surfaces. The tape hand tears for tool-free application.

A masking tape should specify what surfaces it will stick to and the interval over which it will remove cleanly. A very thin or poorly manufactured tape may demonstrate splintering or shredding, either coming off the roll or when being removed after use. Some masking tapes have the tensile strength for light commercial and industrial applications, including bundling, labeling, sealing, temporary repairs, lane marking, splicing and surface protection. The classic crepe paper masking tape is a light tan color, but these masking tapes come in a variety of colors and formulations to meet general and specific applications, such as 3M Outdoor Masking and Stucco Tape 5959. A roll of masking tape is basic toolbox or supply room item in any construction, warehousing, military, marine, shipping, and retail industries.

Features:
This kit is designed to repair tail lights, turn signals, and clear lenses crack easily without removing the housing. The repair panel designed with a pre-formed grid pattern, which matches your original lens closely. Multi-pack repair kit comes with 3 colors, red, amber and clear. Its special adhension will form a weather proof seal, allows to paste on flat or curved surfaces. Practical and economical. Simple repair process, just cut and paste.

Specifications:
Conditions: 100% brand new
Material: plastic
Quantity: 1 pack (3pcs)
Color: red, amber, clear
Size: 192 * 95mm
Package Weight: approx.70g
Applicability: for tail lights, turn signals, and clear lenses crack repair.

Package List:
1 * Pack of Car Lens Crack Repair Film (3 Pieces / 1 Red + 1 Amber + 1 Clear)

Instructions of Quick Lens Repair (Just for Reference):
1. Remove all crack and broken pieces around damaged area. 
2. Clean lens around area thoroughly with dry cloth or paper towel.
3. Hold panel over damaged area to determine size of lens repair panel. Position the pane allowing 1/2 inch over lap on all sides of damage. if size selected needs to be smaller, trim along the inner grid lines.
4. Peel backing from panel and center over area to be repaired. Press the panel to the lens and run your fingers around the edges to insure a good bond.

Note:
Please allow 0.2 inch error due to manual measurement, thanks for your understanding.

Our Promise to Readers

We keep receiving tons of questions of readers who are going to buy 3m strength red lens repair film, eg:

• What are Top 10 3m strength red lens repair film for 2020, for 2019, for 2018 or even 2017 (old models)?
• What is Top 10 3m strength red lens repair film to buy?
• What are Top Rated 3m strength red lens repair film to buy on the market?
• or even What is Top 10 affordable (best budget, best cheap or even best expensive!!!) 3m strength red lens repair film?…
• All of these above questions make you crazy whenever coming up with them. We know your feelings because we used to be in this weird situation when searching for 3m strength red lens repair film.
• Before deciding to buy any 3m strength red lens repair film, make sure you research and read carefully the buying guide somewhere else from trusted sources. We will not repeat it here to save your time.
• You will know how you should choose 3m strength red lens repair film and What you should consider when buying the 3m strength red lens repair film and Where to Buy or Purchase the 3m strength red lens repair film. Just consider our rankings above as a suggestion. The final choice is yours.
• That’s why we use Big Data and AI to solve the issue. We use our own invented, special algorithms to generate lists of Top 10 brands and give them our own Scores to rank them from 1st to 10th.
• You could see the top 10 3m strength red lens repair film of 2020 above. The lists of best products are updated regularly, so you can be sure that the information provided is up-to-date.
• You may read more about us to know what we have achieved so far. Don’t hesitate to contact us if something’s wrong or mislead information about 3m strength red lens repair film.

Conclusion

By our suggestions above, we hope that you can found 3m strength red lens repair film for you.Please don’t forget to share your experience by comment in this post. Thank you!