The 10 Best 3M 7602 Respirator Mask 7602

3M Tekk Protection 27 Pack Respirator Cool Valve Filtering Facepiece Particulate Respirator N95 Lightweight Comfortable “M” Nose Clip Recommended For Sanding & Preparation Before Painting NIOSH Approved: N95

This full facepiece reusable respirator offers lightweight comfort and ease of use. Combine with appropriate 3M particulate filters or cartridges to help provide respiratory protection against particulates or a variety of gases and vapors. The 3M Full Facepiece Reusable Respirator 6000 Series helps provide protection against certain airborne contaminants. Versatile—use with 3M particulate filters, gas/vapor cartridges and supplied air respirator systems. The 3M Cool Flow Valve helps make breathing easier. These features combine to make a comfortable, practical and economical solution. Recommended applications include assembly, chemical clean-up, chemical handling, chemical splash, chipping, chiseling, cleaning, furnace operations, grinding, laboratories, machining, masonry, painting, pouring/casting, sanding, and sawing. Industries in which this full face respirator are commonly used include agriculture, construction, general manufacturing, pharmaceuticals, and primary metals. NIOSH, a Federal government regulatory agency, has tested and approved the 3M Full Facepiece Reusable Respirator 6000 Series with 3M cartridges, filters or PAPR and supplied air systems to help reduce breathing certain airborne contaminants. The 3M Full Facepiece Reusable Respirator 6000 Series facepiece also meets the impact requirements of the ANSI Z87.1-2010 standard, high impact level for face and eye protection. The facepiece works with these approved 3M filters and accessories: 2071, 2076HF, 2078, 2091/07000, 2096, 2097/07184, 2291, 2296, 2297, 7093, 7093C/37173, 603, 5N11, 5P71/07194, 501, and 502. It also works with the following 3M Cartridges 6000 Series: 6001, 6001i, 6002, 6003, 6004, 6005, 6006, 6009, 60921, 60921i, 60922, 60923, 60924, 60925, 60926, 60928, and 60929S. Breathing hazardous particles, gases and vapors can be harmful to your health. With proper fit, use, and the appropriate cartridge/filter, the 3M Full Facepiece Reusable Respirator 6000 Series helps reduce exposure to many contaminants (i.e., dust, mists, fumes, mold, bacteria, paints, acids, ammonia, chlorine, other chemicals, etc.). Enhanced comfort and visibility features make wearing the respirator noticeably more enjoyable. Warning: Respirators help protect against certain airborne contaminants. Before use, the wearer must read and understand the User Instructions provided as a part of the product packaging. Follow all local regulations. In the U.S., a written respiratory protection program must be implemented meeting all the requirements of OSHA 29 CFR 1910.134 including training, fit testing and medical evaluation. In Canada, CSA standards Z94.4 requirements must be met and/or requirements of the applicable jurisdiction, as appropriate. Misuse may result in sickness or death. For correct use, consult supervisor and User Instructions

Product Description

Protect Your Lungs Without Hindering Your Ability To Get The Job Done! Made By 3M, The Protection Professional Multipurpose Respirator Weighs Just Over A Pound Yet Filters At Least 99.7% Lung Protection From Mold, Lead And Dangerous Airborne Sprays From Coatings And Sealants. Use It In Your Shop Or On The Job And Work With Confidence. Made In Usa.Technical Details: Lightweight Design Won’T Hinder Your Ability To See Or Get Work Done Protects Your Lungs From Particles Related To Mold, Lead, Coatings, Solvents, Chlorine, Hydrogen Chloride, Sulfur Dioxide, Hydrogen Fluoride Or Hydrogen Sulfide Ideal For Workplace/Occupational Applications Delivers At Least 99.7 Percent Filtration Efficiency Against Particles (Including Oil) Low Profile Cartridges Won’T Obscure Your Vision Replaceable Cartridges Are Niosh Ov/Ag/P100 Approved 9.25″H X 9.55″W X 5.6″W Weighs Just Over 1 Lb. Made In Usabest Used With: 3M Protection Professional Multipurpose Respirator Replacement Cartridges (#43259)3M Protection Professional Faceshield With Ratchet Adjustment (#43262)Coleman Powermate&Reg; High Volume Low Pressure Spray Gun (#42758)

From the Manufacturer

3M Reusable Dual Cartridge Respirators are designed and constructed for exceptional performance and comfort that lasts. The face-pieces are designed to provide outstanding comfort and fit. The sweptback cartridges improve visibility and the face-pieces can be easily disassembled for cleaning. They are NIOSH approved.

Product Description

OSHA has issued a final rule (March 2016, OSHA Respirable Crystalline Silica in Construction Regulations – 29 CFR 1926.1153) for America’s workers, limiting their exposure to respirable crystalline silica, a substance OSHA has stated can increase the risk of developing silicosis, lung cancer and kidney disease. 3M has resources and PPE to help you as you work to meet the new exposure limit and help protect your crew.

From the Manufacturer

The 3M™ Rugged Comfort Quick Latch Half Facepiece Reusable Respirator 6500 Series helps provide respiratory protection in harsh, dirty environments against airborne contaminants when used with approved 3M cartridges and filters. This facepiece combines comfort, durability, and stability with a firm, lightly textured silicone faceseal and strong body construction. The proprietary quick latch design offers an easy, one-hand touch drop-down mechanism for putting the facepiece on and taking it off while moving in and out of contaminated areas. The quick latch also eliminates the need to remove a hardhat or faceshield when lowering or raising the respirator. When properly fitted and used with approved 3M™ cartridges and filters, this respirator helps provide respiratory protection at concentrations up to 10 times the Permissible Exposure Limit (PEL). While being the lightest silicone 3M facepiece, it is still rugged enough to withstand long hours and extreme conditions. The resilient silicone faceseal offers an extended facepiece life, even keeping its shape in high-heat environments.

The facepiece offers numerous other comfort features. Two innovative design features have been built in: a special valve cover that helps to direct exhaled breath and moisture downward and 3M’s proprietary Cool Flow™ Valve that helps to make breathing easier by reducing heat and moisture. Made to fit securely and comfortably on the head, the facepiece comes with an adjustable head harness assembly featuring long-lasting polyester/spandex straps that stretch and conform to the individual who wears the respirator. This facepiece is compatible with all 3M™ bayonet-style filters and cartridges, including 6000 Series Cartridges and 3M™ 2000, 2200, 7000 or 5000 Series Filters, to help provide respiratory protection against a variety of gases, vapors, and particulate hazards according to NIOSH approvals. This filter compatibility helps to make the respirator highly versatile for many workplace environments and a variety of jobs where respiratory protection is required.

A durable, long-lasting respirator, the 6500 Series facepiece is rugged enough to help withstand extreme conditions and long hours, yet comfortable to wear. The proprietary quick latch design offers allows the wearer to easily put the facepiece on and off. The sleek, low-profile design helps to give a worker a wide field of view that better suits compact work spaces and close proximity to coworkers. The overmolded design offers simplified cleaning and maintenance with fewer parts and crevices where dirt can hide.

Breathing hazardous particles, gases and vapors can be harmful to your health. The 3M™ Rugged Comfort Half Facepiece Reusable Respirator 6500 Series helps reduce exposure to many contaminants when properly fitted and used with approved 3M™ cartridges and filters.

For more than a century, 3M has applied innovation and technology to improving our customers’ lives and supporting their business goals. Today the company, from its headquarters in St. Paul, Minnesota, serves industrial and commercial customers and consumers in nearly 200 countries. Personal Safety products, focused on worker safety, include respirators, hearing-protection products, air-monitoring devices, environmental-safety products, and comprehensive training programs. The 3M brand, across thousands of products, represents consistency, superior quality, and value.

Product Description

This half facepiece reusable respirator offers reliable and convenient respiratory protection and is suitable for many situations, helping provide protection against particulates and a wide variety of gases and vapors according to NIOSH approvals. Compatible and convenient respiratory protection. Half facepiece reusable respirator. Offers reliable, convenient respiratory protection when combined with particulate filters or cartridges (such as organic vapor/acid gas cartridges) or dual airline system. Comes with reclosable storage bag. When properly fitted, helps provide respiratory protection from a variety of gases, vapors and particulate hazards at concentrations up to 10 times the permissible exposure limit (PEL). Not for use in environments that are immediately dangerous to life or health (IDLH). Connection type: bayonet. Facepiece type: half facepiece reusable. Harness type: 4 point. Primary material: thermoplastic elastomer (TPE). Product type: half facepiece. Recommended application: chemical clean-up, chemical handling, chipping, chiseling, furnace operations, grinding, laboratories, machining, masonary, painting, pouring/casting, sanding, sawing, welding. Recommended industry: agriculture, automotive, chemicals, construction, general manufacturing, mining, oil and gas, pharmaceuticals, primary metals, transportation. Size: large.

From the Manufacturer

The 3M™ Half Facepiece Reusable Respirator 6000 Series helps provide protection against particulates and a wide variety of gases and vapors when used with approved cartridges and filters. When properly fitted and used with approved 3M™ cartridges and filters, this respirator helps provide protection at concentrations up to 10 times the Permissible Exposure Limit (PEL). The swept back design of the cartridges helps improve balance and visibility. Remarkably comfortable, soft, lightweight facepiece has easy-to-adjust head straps that allow for a customized fit to the user. Replaceable cartridges help reduce waste and costs over time.

NIOSH, a Federal government regulatory agency, has tested and approved the 6000 Series Half Facepiece with 3M cartridges, filters or supplied air systems. The 6000 Series is NIOSH approved for negative-pressure air purifying and positive-pressure dual airline applications. This half facepiece respirator may be used with 3M™ Cartridge 6000 Series; 3M™ Filters 2000, 2200, 7000 or 5000 Series; or 3M™ Dual Airline Systems against a variety of gases, vapors, and particulate hazards according to NIOSH approvals.

Breathing hazardous particles, gases and vapors can be harmful to your health. The 3M™ Half Facepiece Reusable Respirator 6000 Series helps reduce exposure to many contaminants.

For more than a century, 3M has applied innovation and technology to improving our customers’ lives and supporting their business goals. Today the company, from its headquarters in St. Paul, Minnesota, serves industrial and commercial customers and consumers in nearly 200 countries. Personal Safety products, focused on worker safety, include respirators, hearing-protection products, air-monitoring devices, environmental-safety products, and comprehensive training programs. The 3M brand, across thousands of products, represents consistency, superior quality, and value.

Cartridges Compatible with 3M 6000 Series Half Facepiece Reusable Respirator
	3M Multi Gas Vapor Cartridge/Filter P100	3M Organic Vapor/Acid Gas Cartridge/Filter P100	3M Acid Gas Cartridge/Filter P100	3M Acid Gas Cartridge	3M Ammonia Methylamine Organic Vapor Cartridge/Filter P100	3M Formaldehyde Organic Vapor Cartridge/Filter P100	3M Mercury Vapor Chlorine Gas Cartridge/Filter P100	3M Mercury Organic Vapor or Acid Gas Cartridge
Part Number	60926	60928	60922	6002	60924	60925	60929	6009
NIOSH Color Code	Magenta Olive	Magenta Yellow	Magenta White	White	Magenta Green	Magenta Black Olive	Magenta Orange	Orange
NIOSH Approved for:
Chlorine
Hydrogen Chlorine
Sulfur Dioxide
Chlorine Dioxide
Hydrogen Sulfide
Particulates
Ammonia
Methylamine
Formaldehyde
Certain Organic Vapors
Hydrogen Fluoride
Mercury Vapor

Product Description

3M Paint Project Respirator is used for certain paint spraying, solvents and pesticides. Designed for performance and comfort, 3M Paint Project Respirator features a balanced design for a more comfortable fit. The swept back cartridges are positioned to enhance visibility making it easier to see the project you are working on. 3M Paint Project Respirator is a great choice in respiratory protection for the professional.

Amazon.com

Use when around solvents, pesticides, and paint; helps protect against certain airborne contaminants.

Includes swept back cartridges for improved visibility

3M Respirators

As one of the leading designers and manufacturers of respirators in the world, 3M provides products that address the needs of both workplace, regulated applications and do-it-yourself, non-regulated applications. For workplace uses, employees may be exposed to known concentrations of harmful contaminants for part or all of the workday. In these situations, respirators are intended to help protect the wearer by reducing their exposure to airborne contaminants from a level that may be hazardous to one that is considered safe or acceptable according to government established levels. In addition, home users cannot easily determine exposure levels nor do they have ready access to the type of training medical evaluation and fit testing needed to be in compliance with workplace respirator standards. In these situations, respirators are intended to help keep non-harmful dusts and certain particles out of your nose, mouth and lungs and with some filters help eliminate annoying odors only.

About NIOSH Respirators

This respirator is government approved by the National Institute for Occupational Safety and Health (NIOSH) as an N95 class respirator and is designed for workplace, regulated uses and applications. NIOSH certification means the respirator has passed stringent government performance standards including filtration efficiency testing and provides at least 95% filtration efficiency solid and liquid particles that do not contain oil.

Fitting Instructions

1. Place respirator over mouth and nose, then pull harness over the crown of your head

2. Take bottom straps in both hands, place them in back of your neck, and hook them together.

3. Position face-piece low on the bridge of your nose for optimal visibility and best fit.

4. Adjust top straps first, then lower neck straps by pulling on ends. Do not pull too tight. Strap tension can be decreased by pushing out on back side of buckles. Perform a positive pressure seal check.

Positive Pressure Seal Check

1. Place the palm of your hand over the exhalation valve cover and exhale gently. If face-piece bulges slightly and no air leaks are detected between your face and the face-piece, a proper fit has been obtained

2. If air leakage is detected, reposition respirator on your face and/or readjust tension of the elastic straps to eliminate leakage

3. Repeat above steps until a tight seal is obtained

What’s in the box

One 3M respirator face-piece, one pair organic cartridges, two pair pre-filters, one pair filter retainers

Protect your health while working on your DIY project

NIOSH Certification Guide

See all Product description

Product Description

The 3M 6291 Half Facepiece Respirator Assembly includes the 3M Half Facepiece Respirator 6200 and 3M P100 Particulate Filters 2091. Helps provide respiratory protection in environments containing certain oil and non-oil based particles.

From the Manufacturer

3M™ Half Facepiece Reusable Respirator Assembly includes a 3M™ 6000 Series Half Facepiece Reusable Respirator and two 3M™ 2091 P100 Particulate Filters. This assembly is NIOSH approved for environments containing certain oil and non-oil based particles. When properly fitted, this respirator helps provide protection in a variety of applications including welding, brazing, torch cutting, metal pouring, soldering, and exposure to lead asbestos, cadmium, arsenic, and MDA at concentrations up to 10 times the Permissible Exposure Limit (PEL).

Combining Comfort and Convenience
This respirator is remarkably comfortable, soft, and lightweight, and features easy-to-adjust head straps. The swept-back design of the cartridges helps improve balance and visibility. Easy-to-adjust head straps allow for a customized fit to the user. When used to capacity, the included cartridges can be removed and replaced with new P100 Filter/Cartridges or other NIOSH approved 3M™ 2000 or 2200 Series Filters or 6000 Series Cartridges. The respirator can also be disassembled, cleaned, and reused, extending the life and cost effectiveness of the product.

Meets Government Safety Standards
NIOSH, a Federal government regulatory agency, has tested and approved the 6000 Series with 3M cartridges, filters or supplied air systems to help reduce breathing certain airborne contaminants. The 6000 Series is NIOSH approved for negative air purifying and positive pressure dual airline applications. The respirator comes with a P100 filter, which is replaceable. This half facepiece respirator may be used with any of these replacements: 3M™ Cartridge 6000 Series; 3M™ Filters 2000, 2200, 7000 or 5000 Series; or 3M™ Dual Airline Systems against a variety of gases, vapors, and particulate hazards according to NIOSH approvals.

Importance of Respiratory Protection
Breathing hazardous particles, gases and vapors can be harmful to your health. The 3M™ half Facepiece Reusable Respirator 6000 Series helps reduce exposure to many contaminants. Enhanced comfort and visibility features make wearing the respirator noticeably more enjoyable.

About 3M Company
For more than a century, 3M has applied innovation and technology to improving our customers’ lives and supporting their business goals. Today the company, from its headquarters in St. Paul, Minnesota, serves industrial and commercial customers and consumers in nearly 200 countries. Personal Safety products, focused on worker safety, include respirators, hearing-protection products, air-monitoring devices, environmental-safety products, and comprehensive training programs. The 3M brand, across thousands of products, represents consistency, superior quality, and value.

Engineered for comfort, durability and visibility, the 3M Ultimate FX Full Facepiece Reusable Respirator FF-400 Series is the only respirator with 3M Scotchgard Protector. This respirator features soft yet durable, silicone material and a large lens for excellent peripheral vision. It helps provide protection against certain airborne contaminants while keeping your vision clear with the 3M Scotchgard protected lens which makes it possible to more easily wipe paints, stains and other liquids off the large lens. Versatile—use with 3M particulate filters, gas/vapor cartridges and PAPR and supplied air systems. The 3M Cool Flow Valve helps make breathing easier. These features combine to make extended wear of the facepiece more comfortable and practical to use while helping to provide protection against certain airborne contaminants. A number of additional comfort and convenience features have been built into the facepiece, including a head cradle to help reduce pressure points and hair pulling, a soft silicone nose cup and faceseal to cushion heavy contact areas, bonded silicone gaskets to prevent loose gaskets from getting lost, and attachments that easily twist on and off. The facepiece fits securely with six straps that snugly wrap around the head, reducing shifting that can distract on the job and require readjustment. The straps are extremely durable, having been tested with over one million pulls. Recommended applications include assembly, chemical clean-up, chemical handling, chemical splash, chipping, chiseling, cleaning, furnace operations, grinding, laboratories, machining, masonry, painting, pouring/casting, sanding, and sawing. Industries in which this facepiece are commonly used include agriculture, construction, general manufacturing, pharmaceuticals, and primary metals.   NIOSH, a Federal government regulatory agency, has tested and approved the 3M Ultimate FX Full Facepiece Reusable Respirator FF-400 Series with 3M cartridges, filters or supplied air systems to help reduce breathing certain airborne contaminants. The FF-400 Series facepiece also meets the impact requirements of the ANSI Z87.1-2010 standard, high impact level for face and eye protection. WARNING: Respirators help protect against certain airborne contaminants. Before use, the wearer must read and understand the User Instructions provided as a part of the product packaging. Follow all local regulations. In the U.S., a written respiratory protection program must be implemented meeting all the requirements of OSHA 29 CFR 1910.134 including training, fit testing and medical evaluation. In Canada, CSA standards Z94.4 requirements must be met and/or requirements of the applicable jurisdiction, as appropriate. Misuse may result in sickness or death. For correct use, consult supervisor and User Instructions, or call 3M Personal Safety Division (PSD) Technical Service in the U.S.A. at 1-800-243-4630. In Canada, call 1-800-267-4414.

Product Description

3M personal protective equipment sold through Amazon’s Industrial and Scientific Department is only intended for US occupational workplace use. This 3M personal protective equipment must be used in compliance with the Occupational Safety and Health Administration (OSHA) Personal Protective Equipment (PPE) standard (29 CFR 1910.132) and all other applicable health and safety standards, as well as all user instructions, warnings and limitations accompanying each product. It is essential that all product user instructions and government regulations on the use of each product be followed in order for the product to help protect the wearer. Misuse of personal protective equipment may result in injury, sickness, or death. For correct product selection and use, individuals should consult their on-site safety professional or industrial hygienist. For additional product information, visit www.3M.com/PPESafety.

From the Manufacturer

3M&#8482 Half Facepiece Reusable Respirator 7500 Series helps provide protection against particulates and a wide variety of gases and vapors when used with approved 3M cartridges and filters (sold separately). When properly fitted and used with approved 3M cartridges and filters, this respirator (commonly referred to as a “mask”) helps provide respiratory protection at concentrations up to 10 times the Permissible Exposure Limit (PEL). NOTE: The cartridges shown in photos below are sold separately from the respirator.

 

Respiratory protection in contaminated sites view larger

Respirator is easy to adjust for a comfortable fit view larger

Adjust head harness for drop down mode view larger

Use with eyewear, hard hats and other safety gear view larger

Designed with the Comfort of the Worker in Mind
This respirator uses an advanced silicone material that provides a softer feel on the face. A unique adjustment design helps reduce pressure points on the face for even more comfort. The 3M&#8482 Cool Flow&#8482 Valve helps make breathing easier and can offer cooler and drier comfort for the wearer. Head harness may be adjusted to drop down when not in active use (allows respirator to be removed without taking off hard hat). The exhalation valve cover directs exhaled breath and moisture downward while helping protect the valve area from debris while also making for easier cleaning. Recommended applications include abatement, painting, welding, chemical handling, construction, utilities, mining, pharmaceutical, and smelting.

 

Meets Government Safety Standards
NIOSH, a Federal government regulatory agency, has tested and approved the 7500 Series with 3M&#8482 cartridges, filters or supplied air systems to help reduce breathing certain airborne contaminants. This half facepiece respirator may be used with 3M&#8482 Cartridge 6000 Series; 3M&#8482 Filters 2000, 2200, 7000 or 5000 Series; or 3M&#8482 Dual Airline Systems against a variety of gases, vapors, and particulate hazards according to NIOSH approvals.

 

Importance of Respiratory Protection
Breathing hazardous particles, gases and vapors can be harmful to your health. The 3M™ Half Facepiece Reusable Respirator 7500 Series helps reduce exposure to many contaminants. Enhanced comfort and visibility features make wearing the respirator noticeably more enjoyable.

 

About 3M Company
For more than a century, 3M has applied innovation and technology to improving our customers’ lives and supporting their business goals. Today the company, from its headquarters in St. Paul, Minnesota, serves industrial and commercial customers and consumers in nearly 200 countries. Personal Safety products, focused on worker safety, include respirators, hearing-protection products, air-monitoring devices, environmental-safety products, and comprehensive training programs. The 3M brand, across thousands of products, represents consistency, superior quality, and value.

Our Promise to Readers

We keep receiving tons of questions of readers who are going to buy 3m 7602 respirator mask 7602, eg:

• What are Top 10 3m 7602 respirator mask 7602 for 2020, for 2019, for 2018 or even 2017 (old models)?
• What is Top 10 3m 7602 respirator mask 7602 to buy?
• What are Top Rated 3m 7602 respirator mask 7602 to buy on the market?
• or even What is Top 10 affordable (best budget, best cheap or even best expensive!!!) 3m 7602 respirator mask 7602?…
• All of these above questions make you crazy whenever coming up with them. We know your feelings because we used to be in this weird situation when searching for 3m 7602 respirator mask 7602.
• Before deciding to buy any 3m 7602 respirator mask 7602, make sure you research and read carefully the buying guide somewhere else from trusted sources. We will not repeat it here to save your time.
• You will know how you should choose 3m 7602 respirator mask 7602 and What you should consider when buying the 3m 7602 respirator mask 7602 and Where to Buy or Purchase the 3m 7602 respirator mask 7602. Just consider our rankings above as a suggestion. The final choice is yours.
• That’s why we use Big Data and AI to solve the issue. We use our own invented, special algorithms to generate lists of Top 10 brands and give them our own Scores to rank them from 1st to 10th.
• You could see the top 10 3m 7602 respirator mask 7602 of 2020 above. The lists of best products are updated regularly, so you can be sure that the information provided is up-to-date.
• You may read more about us to know what we have achieved so far. Don’t hesitate to contact us if something’s wrong or mislead information about 3m 7602 respirator mask 7602.

Conclusion

By our suggestions above, we hope that you can found 3m 7602 respirator mask 7602 for you.Please don’t forget to share your experience by comment in this post. Thank you!