Which Is The Best 16 Inch Cooling Fan With Radiator Temp Probe

Specs below are for EACH fan:

6 Inch

Motor Size – 80 Watt
CFM Rating – 700
RPM Rating – 2250
Amp Draw – 8 Amps
Dimensions – 7.5″ x 6.75″ x 2.5″ center thickness & 1.5″ edge thickness

6 Inch (w/ Shroud)

Motor Size – 80 Watt
CFM Rating – 700
RPM Rating – 2250
Amp Draw – 8 Amps
Dimensions – 8″ x 6.5″ x 2.5″ center thickness & 1.25″ edge thickness

7 Inch

Motor Size – 80 Watt
CFM Rating – 800
RPM Rating – 2250
Amp Draw – 8 Amps
Dimensions – 8.5″ x 7.75″ x 2.5″ center thickness & 1.5″ edge thickness

9 Inch

Motor Size – 80 Watt
CFM Rating – 850
RPM Rating – 2250
Amp Draw – 8 Amps
Dimensions – 9.75″ x 9.75″ x 2.5″ center thickness & 1.5″ edge thickness

10 Inch

Motor Size – 80 Watt
CFM Rating – 900
RPM Rating – 2250
Amp Draw – 8 Amps
Dimensions – 11.5″ x 10.75″ x 2.5″ center thickness & 1.5″ edge thickness

12 Inch

Motor Size – 80 Watt
CFM Rating – 1400
RPM Rating – 2250
Amp Draw – 10 Amps
Dimensions – 12.5″ x 11.75″ x 2.5″ center thickness & 2.5″ edge thickness

14 Inch

Motor Size – 90 Watt
CFM Rating – 2500
RPM Rating – 2100
Amp Draw – 12 Amps
Dimensions – 15″ x 14″ x 2.5″ center thickness & 1.5″ edge thickness

16 Inch

Motor Size – 120 Watt
CFM Rating – 3000
RPM Rating – 2050
Amp Draw – 14 Amps
Dimensions – 16.5″ x 15.75″ x 3″ center thickness & 1.5″ edge thickness

Adjustable fan thermostat kit for any automotive vehicle. Probe measures liquid or contact temperature and sends power to the fan. Flexible turn-on/turn-off temperature control range of 32-248’F (0-120’C). Thermostat can be wired as a normally closed or normally open circuit.Turn-off temperature is always 15 degrees less than turn-on. Thermostat dial has both Celsius and Fahrenheit temperature markings. Probe is mounted in between radiator fins / inside water inlet.

Take full control of your electric cooling fan with the Mishimoto Adjustable Fan Controller Kit! This kit is applicable for any 12v electric fan and includes all necessary components for installation. This kit can be purchased with a probe-style temperature sensor or with a 1/8″ NPT thread-in sensor to fit the needs of any project. The Mishimoto Fan Controller features adjustable activation from 150 degrees Fahrenheit to 240 degrees Fahrenheit and deactivates once temperatures are reduced by 10 degrees Fahrenheit. This controller includes a built-in A/C override feature and is designed for use with 1-2 electric fans drawing a combined 25 amps or less. The Mishimoto Adjustable Fan Controller Kit includes the Mishimoto Lifetime Warranty, ensuring superior product quality and craftsmanship.

Welcome to QKPARTS.
We provide 100% perfect customer service, please contact us if you have ANY question!
This kit is set up to turn your electric fan on at 185 degrees and shut off at 165 degrees and will work with any 12 volt system. COMES ON AT 185 degrees ANDTURNS OFF AT 165 degrees. It is a 3/8″ pipe thread, this kit includes everything you’ll need to hook up to your fan.
Works for:
2 x 8 inch Fans
2 x 10 Inch Fans
2 x 12 Inch Fans
2 x 14 Inch Fans
Single 8 Inch Fan
Single 10 Inch Fan
Single 12 Inch Fan
Single 14 Inch Fan
Single 16 Inch Fan
(Two 16 inch fans, need 2 Relay Kits)
Included in this Relay kit:
185 Degree Thermostat Switch
1 Relay Wire Harness
1 3/8″ NPT Thread-In Probe
2 Ring Terminals
2 Fan Pigtail Connectors Included
1 Fuse Holder
3/8″ to 1/2″ Adapter
30 & 40 amp Fuses

Free Shipping :Our inventory is stocked & ready to be shipped from KY, USA.

Highly appreciated your order and hoping you have a best buying experience in our store.

Electric Fan:

• 16 inch reversible 12 volt electric cooling fan.
• Powerful 120 watt motor will keep your engine cool.
• Configured as an air puller out of the box.
• Blade and wiring can be reversed to make the fan an air pusher.
• For radiators, oil coolers, transmission coolers, condensers and more.
• Includes mounting feet attachments and tie strap kit.

    Blade Size
– 15 Inch    Blade Type
– Curved    Motor Size
– 120 Watts    CFM Rating   
– 2500
    RPM Rating
    Amp Draw
– 2050
– 14 Amps    Material
– Plastic Shroud/Steel Motor    Dimensions
– 16.5″ x 15.75″ x 3″ thickness at center x 1″ thickness at edge
Thermostat Kit:

• Universal fit for any automotive vehicle.
• Activates up to (2) fans with maximum 25 amp draw.
• 180’F turn-on temperature, 165’F turn-off temperature.
• 3 inch push-in probe temperature sensor.
• Probe is pushed through radiator fins.
• AC/Manual override circuit.
• Installation instructions included.

Kit Includes:
(1) – 180’F Thermostat Switch (1) – 3″ Brass Push-in Probe (1) – Wiring Harness (1) – 40 Amp Relay (1) – 30 Amp Fuse (1) – Large Ring Terminal (3) – Small Ring Terminals (2) – Butt Connectors (4) – 4″ Wire Ties (2) – Female Connectors (4) – Sheet Metal Screws (2) – Wire Tap Connectors

• Adjustable fan thermostat kit for any automotive vehicle.
• Probe measures liquid or contact temperature and sends power to the fan.
• Flexible turn-on/turn-off temperature control range of 32-248’F (0-120’C).
• Thermostat can be wired as a normally closed or normally open circuit.
• Probe can be mounted in between radiator fins or inside water inlet/outlet tube.
• Capillary thermostat wire is 30 inches in length.
• AC/Manual override circuit built-in to wire harness.
• Installation instructions and diagram included.

Kit Includes:
(1) – Adjustable Thermostat Unit
(1) – Push-in Capillary Probe (1) – Wiring Harness (1) – 40 Amp Relay (1) – 30 Amp Fuse (1) – Large Ring Terminal (3) – Small Ring Terminals (2) – Butt Connectors (4) – 4” Wire Ties (2) – Female Connectors (4) – Sheet Metal Screws (2) – Splice Connectors (1) – Mounting Bracket

Product Description
Electric Fan:
Universal fit for hot rods, classic engines and modern vehicles.
Powerful 120 watt motor will keep your engine cool.
Configured as an air puller out of the box.
Blade and wiring can be reversed to make the fan an air pusher.
Material: Plastic Shroud/Steel Motor

Thermostat Kit:
Universal fit for any automotive application.
Activates by grounding electric fans at preset temperature.
3/8″ NPT thread-in brass probe w/ 1/2″ NPT adapter included.
Probe typically threads into radiator, water outlet hose or manifold.

Package includes:
1X 3/8″ NPT Thread-in Thermostat
1X 1/2″ NPT Adapter
1X Wiring Harness w/ Mount
1X 40 Amp Relay
1X 30 Amp Circuit Breaker
3X Small Ring Terminals
1X Large Ring Terminal
1X Harness Mounting Screw
2X Butt Connectors
2X Sheet Metal Screws
1X Female Connector
Just as pictures show

Application:
Universal

Conclusion

By our suggestions above, we hope that you can found 16 inch cooling fan with radiator temp probe for you.Please don’t forget to share your experience by comment in this post. Thank you!