onceownedby 
Nowadays, there are so many products of 12v self cooling motor in the market and you are wondering to choose a best one. You have searched for 12v self cooling motor in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings 12v self cooling motor which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
uxcell DC 12V 100RPM Worm Gear Motor 6mm Female Shaft High Torque Turbine Reducer
- Quality Guarantee – Authentic Uxcell brand, we are the ORIGINAL, now copied by many, but they cannot match our constant improvement of quality and personal customer care. Choose a brand you can trust, by people who use their own products. Uxcell you can believe in.
- The Data You Should Notice Before Buy – Rated Voltage: DC 12V
- Output Speed: 100RPM
- Rated Torque: 0.375kg-cm(0.33lb-in)
- Female Shaft Size: 6 x 14mm/ 0.24inch x 0.55inch(D*L)
- Female Thread Diameter: 2.5mm/ 0.1inch
- Motor Body Size: 30 x 25mm/ 1.2inch x 1inch(L*Max.D)
- Gear Box Size: 45 x 30 x 25mm/ 1.8inch x 1.2inch x 1inch(L*W*T)
- Feature – The motor is Gear DC motor with micro-turbine worm, you can change the wiring-connection to change motor rotation. -Turbo worm geared motor with self-lock, that is, in the case of motor without electric, the output axis is fixedand self-locking. -The output shaft of the whole motor body is relatively short in the direction of normal speed reducer, and it is widely used in some situations where the installation dimension is required.
- Application – Label machines, remote control curtains, automatic voltage regulators, barbecue grills, ovens, washers, waste disposal machines, household appliances, coin machines, paper currency recognizers, automatic actuators, coffee machines, towel machines, printing machines and Stage lighting. This section is suitable for small motor configuration high speed ratio, the installation space is limited occasions, large torque output.
- What You Get – 1PCS x DC Geared Motor
- if you need other voltage and rpm, pls contact us, there are many other models of this motor in store.
SCITOO ABS plastic Heater Blower Motor w/Fan HVAC Resistors Blowers Motors Replacement fit for 1994-2001 Dodge Ram 1500/1994-2002 Dodge Ram 2500/1994-2002 Dodge Ram 3500/1993-1998 Jeep Grand Cherokee
- 【FITMENT】: the Heater Blower Motor fit for 1994-2001 Dodge Ram 1500/ 1994-2002 Dodge Ram 2500/ 1994-2002 Dodge Ram 3500/ 1995-2002 Dodge Ram 4000/ 1993-1998 Jeep Grand Cherokee
- 【ADVANTAGE OF THE MOTOR】: Wind power strong and No noise. Adopt new technology and excellent production equipment to make products more environmentally friendly and energy-saving.
- 【FEATURE OF THE MOTOR】: Permanently lubricated self-aligning bearings with long design life and reliable performance. This high quality blower motor is a new aftermarket replacement part built on the most stringent quality control standards.
- 【PREFERRED MATERIAL】: Superior materials which provide maximum strength and durability. Material of rotor punching plate is silicon steel sheet. Enameled wire is used copper enameled wire.
- 【PACKAGE INCLUDED】: 1pc aftermarket fan motor and fan cage with 1 Year WANRRTY. Please double-check the parts search above to make sure it fits your vehicle.
Detailed Applications
Specifications:
Brand New Blower Motor with Fan Cage
Direct replacement
Built to strict quality control standards
Does not include housing seal
Must be installed with original gasket
Brand NEW fitting for the following years and models:
1994-01 Dodge Ram 1500 Truck Heater Blower Motor with Fan Cage
1994-02 Dodge Ram 2500 Truck Heater Blower Motor with Fan Cage
1994-02 Dodge Ram 3500 Truck Heater Blower Motor with Fan Cage
1993-98 Jeep Grand Cherokee Heater Blower Motor with Fan Cage
1 Year Warranty
This item is backed by a 1 Year Warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge (excludes shipping charges) for the original purchaser.
Please note: Any modifications to an item of any kind before contacting us will void any and all warranty coverage for this item. Please contact us before modifying the part so that we have the opportunity to correct the situation.
Package Including
1 x Blower Motor Fan as pictured
NURSAL Back Massager Shiatsu Massage Seat Cushion with Heat Function, Deep Kneading Self-Massager with Vibrations – Helps Relieve Muscle Soreness for Back and Neck
- NECK KNEADING MASSAGE: The 4 deep kneading rolling nodes massage the neck muscles, relieving any tension. There are two different modes – clockwise and anticlockwise. At the same time, the heat function – which can be turned on and off – soothes your neck muscles helping you relax from a stressful day of work.
- BACK SHIATSU & ROLLING MASSAGE: Adjust the position of the four massage rollers to focus on the area you want to target. Or alternatively, allow the massage nodes to travel up and down the whole of your back for total relaxation.You can also choose to have the massage nodes perform kneading, waving and shiatsu massage.
- SPECIALLY DESIGNED 3D ROTATING BALLS: The 3D rotating balls are specially designed to penetrate deep into your muscle tissue. In this way, the strong kneading and penetration imitates a real massage therapist hands. Included is an adapter for the home and car, so you can use the NURSAL massage cushion to make any chair the best seat in the house, office or car!
- HIP VIBRATION MASSAGE: The seat cushion features three levels of vibration massage, including high, medium and low.
- SAFE TO USE: This NURSAL massage cushion has an automatic 15-minute shut off feature that protects the device from damage and conserves energy in case you forget to turn the massager off.
Upgr8 Universal High Performance 12V Slim Electric Cooling Radiator Fan With Fan Mounting Kit (14 Inch, Black)
Brand new radiator cooling fan blade for universal use. It is good for stock cooling, perfect for turbo applications. Easy direct installation, require no modification. Instruction is not included. Professional installation is highly recommended.
bayite BYT-7A006 DC 12V Solar Hot Water Heater Circulation Pump Low Noise 3M Discharge Head 2.1GPM
- Circulation pump is non-self-priming pump (0 Suction Height). Max Flow Rate: 2.1GPM, Max Discharge Head: 9.8ft. Max system pressure: 10Bar(145PSI) . This doesn’t mean the pump produces 145PSI. It means the pump can be connected to the system less than 145PSI pressure
- 1/2″ Male thread on the pump. The OD of the brass coupler is 10mm. NO POWER ADAPTER INCLUDED
- Power source: DC 12V(NOT INCLUDED), Rated current: 0.7A, Brushless Motor, Low noise: 30db at 1 metre, Service life: 30000 hours. Please note: If you use this pump for circulating wort it should be cleaned out after using it
- Max circulating water temperature: 100°C/212°F. It’s submersible but can’t be immersed in hot water exceeding 50°C/122℉
- One year warranty: replacement without return
Onyehn 2Pcs 1.8v 3v 5v 6v 7.2v 12v 2A 30W Low Voltage DC Motor Speed Controller PWM 1803BK 1803B Adjustable Driver Switch 2 Pack
- This Brand New 1803BK DC Motor Speed Controller allows controlling the direction of a DC the motor using a Pulse-Width-Modulated (PWM) DC voltage with a Duty Cycle fully the product adjust from 0%-100%.
- With a self-recovery fuse 2A and a Power-On LED light.
- Enable to provide a continuous current of 2A to your DC motor or other DC load.
- If the current is too large, it will be automatically disconnected, and the fuse will automatically recover after cooling.
- PWM DC motor speed controller with switch function.
Specifications:
Input supply voltage:1.8V-15VDC
The max output power:30W
The max continuous output current :2A
Duty Cycle adjustable: 0%-100%
Size: approx. 32*32*15mm/1.25*1.25*0.59”
Net weight: approx. 14g
Note:
DC motor speed regulator DC power supply, do not be directly connected to household 220V AC.
Please allow 1-3mm differs due to manual measurement.
Connect a voltage of 1.8V-15V DC to the circuit making sure of the correct polarity of the connection. Note that the voltage applied to the motor will be supply voltage applied to the circuit. It is recommended to add an appropriately rated fuse in line with the positive supply in order to protect the circuit from any possible short circuits.
You can now control the speed of the motor through potentiometer. Important Notes： An appropriately rated fuse (rated a little higher than the maximum current you expect to draw) is recommended to ensure safe operation. The controller is safe with a self-recovery fuse 2A. It will be damaged if connect the supply voltage with wrong polarity. Double check all connections before applying power and always turn off the power supply before making any wiring changes
Due to different batches of products, backplane style and cap color are shipped randomly
uniquegoods 1.8v 3v 5v 6v 7.2v 12v 2A 30W DC Motor Speed Controller (PWM) 1803BK Adjustable Driver Switch
- 【1803BK DC Motor Governor】1803BK DC Motor speed regulator controls the speed of a DC motor by adjusting Pulse-Width-Modulated (PWM).
- 【Performance】Input supply voltage DC 1.8V-15V. Maximum continuous output current 2A. Maximum output power 30W. Duty cycle adjustable 0%-100%.
- 【Features】Ultra-low voltage dc motor governor
- Potentiometer with switch function
- Use a 2A resettable fuse to protect the controller
- Power-on indicator.
- 【Practical】The governor is equipped with a self-recovery fuse. When the current is too large, the fuse is automatically disconnected. After cooling, the fuse is automatically restored.
- 【Note】DC motor speed controller is connected to DC power supply. Never connect directly to household 220V AC power supply.
Parameters:
● Input Supply Voltage: DC 1.8V-15V.
● Maximum Continuous Output Current: 2A.
● Maximum Output Power: 30W.
● Duty cycle adjustable 0%-100%.
● Item Size: 1.3×1.3×0.6 inches.
● Potentiometer Opening Size: 8mm.
● Net Weight: 0.5 ounces.
Features:
● Ultra-low voltage dc motor governor.
● Potentiometer with switch function.
● Use a 2A resettable fuse to protect the controller.
● Power-on indicator.
Operating Instruction:
Before you attempting to wire the controller, make sure power is off.
WARNING: TO CHANGE MOTOR DIRECTION, INTERCHANGE THE POSITIVE AND NEGATIVE WIRES OF MOTOR.
● Connect wires refer to the “wiring diagram” (NO.5 picture).
● Turn on the power, and adjust the potentiometer.
● The LED indicates the power up and the speed of motor.
Package Included:
1 x DC Motor Speed Controller
XLX PWM DC Motor Governor 12V 24V 36V 48V High Power Drive Module Adjustable Speed PWM Controller Regulation Switch 20A Ultra small LED dimmer with Speed Control Knob
- Super material: It is made of electronic accessories element, inner conductor is pure copper. it is long lasting and durable for you to use.
- Package including: 1 Pack of PWM DC Motor Governor module. Ultra low voltage dc motor governor, with switch function. The product is suitable for self-recovery fuse, the current is too large and automatically disconnects, and the fuse is automatically restored after cooling.
- PWM DC Motor Governor specification: The working voltage is DC10-60V Maximum output power: 1200W. The current is up to 20A. Potentiometer with switch function.
- High Power High Efficiency: It is precise and reliable with good long-term stability. With fixing screw hole, convenient for install and fixed. Small size, low power consumption, fast response.
- A wide range of applications: It is suitable for the speed regulation of DC motor, fan, fish tank oxygen pump and other products.
Features:
Mini PWM DC Motor Speed Regulator controls the speed of a DC motor by adjusting Pulse-Width-Modulated (PWM).
The product is suitable for self-recovery fuse, the current is too large and automatically disconnects,
and the fuse is automatically restored after cooling.Potentiometer with switch function.
Package Including:
2 x DC Motor Speed Controller
Specification:
Input voltage: DC10-60V
Output voltage: linear under load
Output limit current: 20A (10A, 450W for long time use, pay attention to keep the module cool and cool)
Ultimate power: 1200W
Speed control type: flow adjustment
Speed control mode: potentiometer (linear)
Speed regulation duty range: 0 – 100%
Control frequency: 25KHZ
Wiring type: fence terminal block
Knob line length: 20CM
Module size: Length * width * height 77MM * 45MM * 28MM
Product net: 73 grams
Motherboard mounting size: Length * width 73MM * 40MM
Potentiometer according to the opening: 7MM
Wiring diagram
Make sure that the positive and negative connections are correct before powering on. Do not touch the heat sink with the wiring.
If it touches, it may burn the circuit board. Note that this is not a power module. It must be connected to the motor to speed it up.
There is no change in the output of the multimeter without the motor.
Input is 9-60V DC
Power: POWER+ POWRE-
Motor: MOTOR+ MOTOR-
Please note:
1. This governor is used for DC brushed motors.
2, not suitable for DC brushless motor speed; can not be used as a regulator or regulator!
Onyehn 3Pcs 1.8v 3v 5v 6v 7.2v 12v 2A 30W Low Voltage DC Motor Speed Controller PWM 1803BK 1803B Adjustable Driver Switch 3 Pack
- This Brand New 1803BK DC Motor Speed Controller allows controlling the direction of a DC the motor using a Pulse-Width-Modulated (PWM) DC voltage with a Duty Cycle fully the product adjust from 0%-100%.
- With a self-recovery fuse 2A and a Power-On LED light.
- Enable to provide a continuous current of 2A to your DC motor or other DC load.
- If the current is too large, it will be automatically disconnected, and the fuse will automatically recover after cooling.
- PWM DC motor speed controller with switch function.
Specifications:
Input supply voltage:1.8V-15VDC
The max output power:30W
The max continuous output current :2A
Duty Cycle adjustable: 0%-100%
Size: approx. 32*32*15mm/1.25*1.25*0.59”
Net weight: approx. 14g
Note:
DC motor speed regulator DC power supply, do not be directly connected to household 220V AC.
Please allow 1-3mm differs due to manual measurement.
Connect a voltage of 1.8V-15V DC to the circuit making sure of the correct polarity of the connection. Note that the voltage applied to the motor will be supply voltage applied to the circuit. It is recommended to add an appropriately rated fuse in line with the positive supply in order to protect the circuit from any possible short circuits.
You can now control the speed of the motor through potentiometer. Important Notes： An appropriately rated fuse (rated a little higher than the maximum current you expect to draw) is recommended to ensure safe operation. The controller is safe with a self-recovery fuse 2A. It will be damaged if connect the supply voltage with wrong polarity. Double check all connections before applying power and always turn off the power supply before making any wiring changes
Due to different batches of products, backplane style and cap color are shipped randomly
XLX 2PCS Mini PWM DC Motor Governor 3V 6V 12V 24V 35V Adjustable Speed Controller Regulation Switch 5A Ultra small LED dimmer with Speed Control Knob
- Super material: It is made of electronic accessories element, inner conductor is pure copper. it is long lasting and durable for you to use.
- Package including: 2 Pack of PWM DC Motor Governor module. Ultra low voltage dc motor governor, input dc1.8-15v voltage range, applicable current up to 5A, with switch function. The product is suitable for self-recovery fuse, the current is too large and automatically disconnects, and the fuse is automatically restored after cooling.
- PWM DC Motor Governor specification: The working voltage is DC3V-35V Maximum output power: 30W. The current in the same product is up to 5A. Potentiometer with switch function.
- High Power High Efficiency: It is precise and reliable with good long-term stability. With fixing screw hole, convenient for install and fixed. Small size, low power consumption, fast response.
- A wide range of applications: It is suitable for the speed regulation of DC motor, fan, fish tank oxygen pump and other products.
About us:
This is the new mini wide voltage DC motor governor, it adopts low voltage drive technology. The current in the
same product is up to 5A,small in size and easy to operate. Applicable voltage is the widest 3-35V, with self-recovery fuse.
The performance of similar products is stable, the most cost-effective pocket DC governor, also suitable for LED dimming.
Features:
Mini PWM DC Motor Speed Regulator controls the speed of a DC motor by adjusting Pulse-Width-Modulated (PWM).
The product is suitable for self-recovery fuse, the current is too large and automatically disconnects,
and the fuse is automatically restored after cooling. Potentiometer with switch function.
Operating instruction:
The input voltage is divided into two gears, and the default is to disconnect the short contact for 5-35v input.
If the short contact is suitable for 3-15v input, the default is to disconnect the short contact for 5-35v input,
and the low voltage input can be changed if necessary.
Package Including:
2 x DC Motor Speed Controller
Specification:
(1) Working voltage: DC3V-35V
(2)Control power: 30W (maximum)
(3) Quiescent current: 0.015A (standby state)
(4) PWM duty cycle: 1%-100%
(5) PWM frequency: 10khz
(6) Model: ZS-X4A
(7)Shell size: Length 30mm/ 1.18” x width 24mm/0.94” (without handle) total height 15mm/0.59”
(8)Net amount: 0.015KG
(9)With fixing screw hole, convenient for install and fixed.
(10)Over temperature protection: Automatically turn off the output after over temperature
(11)Weight: 14g
Special note:
Dc motor governor connected to dc power supply, do not directly connected to household 220V ac, otherwise the damage at your own risk!
Conclusion
By our suggestions above, we hope that you can found 12v self cooling motor for you.Please don’t forget to share your experience by comment in this post. Thank you!
