onceownedby 
Nowadays, there are so many products of 12 volt thermoelectric cooling module in the market and you are wondering to choose a best one. You have searched for 12 volt thermoelectric cooling module in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings 12 volt thermoelectric cooling module which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
GeeBat 10PCS TEC1-12706 Thermoelectric Cooler Heat Sink Heatsink Cooling Peltier 12V 5.8A
Feature:
100% Brand new and high quality.
Get ice cold in minutes or heat to boiling by simply reversing the polarity, used for numerous applications from CPU coolers to alternate power sources, or even for your own custom car drink warmer/cooler.
Since they consist primarily of semiconductor material sandwiched between ceramic plates and have no moving parts.
These devices must be used in conjunction with a heat sink to avoid burned.
Each device is full inspected and tested.
Fitted with 6-inch insulated leads.
Specifications:
Model: TEC1-12706
Size: Approx. 40mm x 40mm x 3.8mm
Voltage: 12V
Umax (V): 15V
Cooling power: Qcmax 58-65W
Imax (A): 5.8A
△Tmax(Qc=0): up to 65°C
Operates Temperature: -30°C to 83°C
Power Cord: 25-30cm
Package Included:
10* TEC1-12706 Thermoelectric Cooler
ESUMIC 5PCS TEC1-12706 Thermoelectric Cooler Heat Sink Cooling Peltier Module 12V 60W 5.8A
- 1. Description: Model: TEC1-12706. Size: 40 mm x 40 mm x 4 mm. Fitted with 30cm insulated leads.
- 2. Material: Mainly consisting of sandwich semiconductor material between the ceramic plates and have no moving parts.
- 3. Performance:Each device is full and inspected tested. Easy to install and use.
- 4. Application:Get ice cold in minutes or heat to boiling by simply reversing the polarity, used in many occasions or even your own custom car drink hot/cooler.
- 5. Attention:These devices must be used in conjunction with a heat sink to avoid burned.
Used for many applications from CPU coolers to alternate power sources. Great for your own custom car drink warmer/cooler as well.
Features:
– It heats one side while simultaneously cooling on the other.
– You can use multiple ones in series or parallel.
– You may glue (use thermal glue) it right on to the chip or whatever you want.
– You can reverse the polarity and thus switch which side gets cold and which gets hot.
Specification:
– Model: TEC1-12706
– Size: Approx. 40mm x 40mm x 4mm
– Voltage: DC 12V
– Max Power: 60W
– Imax (A): 5.8A
– Power Cord : 300mm
– Red wire to the positive, black wire to the negative
How to Use:
– Prepare five things, Thermoelectric Cooler + heatsink + Grease + potholder + power.
– Coated with silicone grease on both sides of the thermoelectric cooler.
– Place the thermoelectric cooler on a heat sink with a potholder in the middle.
– Tighten the screws. Powered, and it starts cooling.
Please Note:
– When installing, please pay attention to clean and flat surfaces
– Use only with the use of thermal grease
– Only in combination with a sufficiently dimensioned heat sink
Packing Contain:
5PCS x TEC1-12706 Thermoelectric Cooler
ESUMIC DC 12V DIY Thermoelectric Peltier Refrigeration Cooling System Kit Semiconductor Cooler Conduction Module + Radiator + Fan + TEC1-12706
- 1. Material: Adopt TEC1-12706 semiconductor chilling plate, good quality for use.
- 2. Structure: Complete sealed structure, isolating the moisture in the air.
- 3. Application: Include TEC1-12706 semiconductor cooler and other accessories, easy to install. Compact size can be installed anywhere, easy installation. Suitable for small space cooling,semiconductor refrigeration learning theory, research solutions developed cooling equipment planning.
- 4. Performance: High cooling efficiency, easily cooling down within a few minutes. Mini air conditioner for pet or little fridge.
- 5. Effect: Great DIY kit for electronic enthusiasts in semiconductor cooling applications.
Great idea for pet cooling in hot summer, such as chicken, little dog. Can used for plate cooling, pet bed cooling, test bench, small space cooling.
Specification:
-Material: Aluminum
-Power Supply: DC 12V
-Power Cnsumption: 72W
-Size: Approx. 120 * 100 * 80mm / 4.7 * 3.9 * 3.1inch
Package Included:
1 x Cooling System Kit
ESUMIC 5PCS TEC1-12704 Thermoelectric Cooler Heat Sink Cooling Peltier Module 12V 36W
- 1. Model: TEC1-12704. Size: 40 mm x 40 mm x 4 mm. Fitted with 30cm insulated leads.
- 2. Application:Get ice cold in minutes or heat to boiling by simply reversing the polarity, used in many occasions or even your own custom car drink hot/cooler.
- 3. Material: Mainly consisting of sandwich semiconductor material between the ceramic plates and have no moving parts.
- 4. Performance:Each device is full and inspected tested. Easy to install and use.
- 5. Attention:These devices must be used in conjunction with a heat sink to avoid burned.
Used for many applications from CPU coolers to alternate power sources. Great for your own custom car drink warmer/cooler as well.
Features:
– It heats one side while simultaneously cooling on the other.
– You can use multiple ones in series or parallel.
– You may glue (use thermal glue) it right on to the chip or whatever you want.
– You can reverse the polarity and thus switch which side gets cold and which gets hot.
Specification:
– Model: TEC1-12704
– Size: Approx. 40mm x 40mm x 4.0mm
– Voltage: DC 12V
– Max Power: 36W
– Imax (A): 4A
– Power Cord : 300mm
– Red wire to the positive, black wire to the negative
How to Use:
– Prepare five things, Thermoelectric Cooler + heatsink + Grease + potholder + power.
– Coated with silicone grease on both sides of the thermoelectric cooler.
– Place the thermoelectric cooler on a heat sink with a potholder in the middle.
– Tighten the screws. Powered, and it starts cooling.
Please Note:
– When installing, please pay attention to clean and flat surfaces
– Use only with the use of thermal grease
– Only in combination with a sufficiently dimensioned heat sink
Packing Contain:
5PCS x TEC1-12704Thermoelectric Cooler
Aideepen 5pcs TEC1-12706 12V 6A Heatsink Thermoelectric Cooler Cooling Peltier Plate Module 40x40MM
Similar items with 4 stars and above
12V Semiconductor Refrigeration Cooler Thermoelectric Peltier Cooling System Heat Sink Conduction Module DIY Kit with Fan for Air Cooling Dehumidification System, Semiconductor Refrigeration Learning
- Application for small space cooling, air cooling dehumidification, semiconductor refrigeration learning theory, etc
- Simple operation, good practicability
- Cooling quickly, outstanding effect
- Refrigeration effect depends on the size of the cooling space, ambient temperature, heat insulation, seal ability, etc
- Semiconductor coolers are a form of solid state cooling that incorporates both semiconductor Technologies and electronic assembly techniques
Features:
Application for small space cooling, air cooling dehumidification, semiconductor refrigeration learning theory, etc. Simple operation, good practicability. Cooling quickly, outstanding effect. Refrigeration effect depends on the size of the cooling space, ambient temperature, heat insulation, seal ability, etc. Semiconductor coolers are a form of solid state cooling that incorporates both semiconductor Technologies and electronic assembly techniques.
Specifications:
Working current: 6A
Working voltage: 12V
Can also use 12V 10A power supply, frozen fast.
Power: 72w
Size: 175 * 100 * 98 mm/6.88 * 3.93 * 3.85inch
Package Included:
1 x Semiconductor Refrigeration
diymore 10pcs TEC1-12706 12V 60W 6A 40MMX40MM Heatsink Thermoelectric Cooler Cooling Peltier Plate Module
MTMTOOL 1.57" x 1.57" TEC1-12706 Heatsink Semiconductor Refrigeration Tablets 6A 12V Thermoelectric Cooler Cooling Plate Module
- TEC1-12706 Thermoelectric Cooler Cooling Plate Module.
- Qcmax:58-65W
- Tmax(Qc=0):up to 60°C.
- Total Size:40 x 40 x 3.8mm/1.6″ x 1.6″ x 0.15″(L*W*H).
- Semiconductor coolers are a form of solid state cooling that incorporates both semiconductor technologies and electronic assembly techniques.
- The cooling sheet is made up of a double-sided ceramic panel and a semiconductor material through a combination of low-melting solder.It is a fragile material.Users must take it lightly.
Features:
Always apply thermal grease when installing the heat sink.
Enables reduced, low-noises operation of cooling fans, while providing greater cooling power.
Application range:portable cooler box for cars,food and beverage service refrigerator,liquid cooling,temperature stabilizer,CPU cooler and scientific instrument,photonic and medical systems,ect.
Specification:
Net Weight:25g
Color:White,Red,Black
Material:Ceramic
Model:TEC1-12706
Imax:6A;Rated Voltage:12V
Cooling power:Qcmax 58-65W
Tmax(Qc=0):up to 60°C
Operates Temperature:-55°C to 83°C
Power Cord(Approx.):Approx. 300mm±5mm/11.81″±0.2″
Size(Approx.):40mm x 40mm x 3.8mm/1.57″ x 1.57″ x 0.15″
Package Includes:
1 x Thermoelectric Cooler
Note:
Due to the manual measurement,there may be small deviations.
The color may have different as the difference display,please understand.
ESUMIC 10PCS TEC1-12706 Thermoelectric Cooler Heat Sink Cooling Peltier Module 12V 60W 5.8A
- 1. Model: TEC1-12706. Size: 40 mm x 40 mm x 4 mm. Fitted with 30cm insulated leads.
- 2. Performance:Each device is full and inspected tested. Easy to install and use.
- 3. Material: Mainly consisting of sandwich semiconductor material between the ceramic plates and have no moving parts.
- 4. Application:Get ice cold in minutes or heat to boiling by simply reversing the polarity, used in many occasions or even your own custom car drink hot/cooler.
- 5. Attention:These devices must be used in conjunction with a heat sink to avoid burned.
Used for many applications from CPU coolers to alternate power sources. Great for your own custom car drink warmer/cooler as well.
Features:
– It heats one side while simultaneously cooling on the other.
– You can use multiple ones in series or parallel.
– You may glue (use thermal glue) it right on to the chip or whatever you want.
– You can reverse the polarity and thus switch which side gets cold and which gets hot.
Specification:
– Model: TEC1-12706
– Size: Approx. 40mm x 40mm x 4mm
– Voltage: DC 12V
– Max Power: 60W
– Imax (A): 5.8A
– Power Cord : 300mm
– Red wire to the positive, black wire to the negative
How to Use:
– Prepare five things, Thermoelectric Cooler + heatsink + Grease + potholder + power.
– Coated with silicone grease on both sides of the thermoelectric cooler.
– Place the thermoelectric cooler on a heat sink with a potholder in the middle.
– Tighten the screws. Powered, and it starts cooling.
Please Note:
– When installing, please pay attention to clean and flat surfaces
– Use only with the use of thermal grease
– Only in combination with a sufficiently dimensioned heat sink
Packing Contain:
10PCS x TEC1-12706 Thermoelectric Cooler
Diymore 3pcs TEC1-12706 40x40MM 12V 6A Heatsink Thermoelectric Cooling Peltier Plate Module
- Working Current: Imax = 6A (rated voltage starting 4.5A).
- Maximum Temperature Difference: △ Tmax (Qc = 0) 62 ℃ above.
- Internal Resistance: 2.0 ~ 2.2Ω (ambient temperature 23 ± 1 ℃, 1kHZ Ac test).
- Lead Specifications: Lead wire length: 300 ± 5mm RV standard
- Tinning Single-head: 5mm
- Working Environment Temperature Range -55 ℃ ~ 83 ℃ (high ambient temperature will directly affect the cooling efficiency).
Conclusion
By our suggestions above, we hope that you can found 12 volt thermoelectric cooling module for you.Please don’t forget to share your experience by comment in this post. Thank you!
